59 lines
2.9 KiB
Markdown
59 lines
2.9 KiB
Markdown
---
|
|
layout: page
|
|
title: VT100 Terminal
|
|
permalink: /devices/pc8080/machine/vt100/
|
|
machines:
|
|
- type: pc8080
|
|
id: vt100
|
|
debugger: true
|
|
---
|
|
|
|
VT100 Terminal
|
|
--------------
|
|
|
|
This is where we'll be testing another 8080-based machine: a VT100 Terminal. Unlike other VT100 emulations,
|
|
this will simulate a VT100 by running the terminal's original firmware inside the [PC8080](/modules/pc8080/) CPU emulator.
|
|
|
|
As described in the [Technical Manual (July 1982)](http://bitsavers.informatik.uni-stuttgart.de/pdf/dec/terminal/vt100/EK-VT100-TM-003_VT100_Technical_Manual_Jul82.pdf),
|
|
p. 4-15, 8Kb (0x2000) of ROM is located at 0x0000, and 3Kb (0x0C00) of RAM immediately follows it at 0x2000.
|
|
|
|
[vt100romhax](http://vt100romhax.tumblr.com/post/90697428973/the-vt100-memory-map-and-8080-disassembly)
|
|
(aka [phooky](https://github.com/phooky)) further explains VT100 memory usage:
|
|
|
|
Start End Size Description
|
|
0x0000 0x1fff 8K Basic ROM
|
|
0x2000 0x2012 18B Blank lines for refresh (6 x 3B)
|
|
0x2012 0x204f 61B Stack area (grows down from 0x204e)
|
|
0x204f 0x22d0 641B Scratch Pad/Setup Area(?)
|
|
0x22d0 0x2c00 2352B Screen RAM
|
|
|
|
Normally, the PC8080 Video component allocates its own video buffer, based on the specified buffer address
|
|
(*bufferAddr*) and other dimensions (eg, *bufferCols* and *bufferRows*), but the VT100 is a little unusual:
|
|
it has a custom video processor that uses DMA to request character data from any region of RAM, one line at a time.
|
|
It always defaults to address 0x2000 for the first line of character data, but each line terminates with 3 bytes
|
|
containing line attributes and the address of the next line, so the location of subsequent lines will vary,
|
|
depending on the following line attributes:
|
|
|
|
* Single-width characters (80 or 132 columns)
|
|
* Double-width characters (40 or 66 columns)
|
|
|
|
In addition to single vs. double width, line attributes can also specify double height (along with whether the
|
|
top half or bottom half of the character should be displayed).
|
|
|
|
The VT100 screen displays 800 dots per horizontal scan, and a total of 240 horizontal scans,
|
|
so for optimum scaling, we define our own screen using multiples of those dimensions (currently 1600x480),
|
|
and by default, it uses a 10x10 character cell, so the default display dimensions are 80 columns by 24 rows.
|
|
|
|
In light of the above, the [machine XML file](machine.xml) must set the Video component's *bufferRAM* property
|
|
to "true", indicating that existing RAM should be used, and a new property, *bufferFormat* must be set to "vt100",
|
|
enabling support for the VT100's line data format; eg:
|
|
|
|
<ram id="ram" addr="0x2000" size="0x0C00"/>
|
|
<video id="video" screenWidth="1600" screenHeight="480" bufferAddr="0x2000" bufferRAM="true" bufferFormat="vt100" bufferCols="80" bufferRows="24" ...>
|
|
|
|
{% include machine.html id="vt100" %}
|
|
|
|
VT100 Resources
|
|
---------------
|
|
|
|
[VT100 Publications](/pubs/dec/vt100/)
|