/**
* @fileoverview PCx86-specific BIOS/DOS interrupt definitions.
* @author Jeff Parsons
* @copyright © Jeff Parsons 2012-2017
*
* This file is part of PCjs, a computer emulation software project at .
*
* PCjs is free software: you can redistribute it and/or modify it under the terms of the
* GNU General Public License as published by the Free Software Foundation, either version 3
* of the License, or (at your option) any later version.
*
* PCjs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
* even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with PCjs. If not,
* see .
*
* You are required to include the above copyright notice in every modified copy of this work
* and to display that copyright notice when the software starts running; see COPYRIGHT in
* .
*
* Some PCjs files also attempt to load external resource files, such as character-image files,
* ROM files, and disk image files. Those external resource files are not considered part of PCjs
* for purposes of the GNU General Public License, and the author does not claim any copyright
* as to their contents.
*/
"use strict";
var Interrupts = {
VIDEO: 0x10,
DISK: 0x13,
CASSETTE: 0x15,
KBD: 0x16,
RTC: 0x1A,
ALT_TIMER: 0x1C, // invoked by the BIOS timer interrupt handler (vector 0x08)
DOS: 0x21,
DOS_IDLE: 0x28,
DOS_NETBIOS:0x2A,
MOUSE: 0x33,
ALT_DISK: 0x40, // HDC BIOS saves original FDC BIOS vector here
HD0_PARMS: 0x41, // parameter table for hard drive 0
HD1_PARMS: 0x46, // parameter table for hard drive 1
HD_PARMS: {
MAX_CYL: 0x00, // maximum cylinders (2 bytes)
MAX_HEADS: 0x02, // maximum heads (1 byte)
WP_CYL: 0x05, // write precompensation cylinder (2 bytes)
MAX_ECC: 0x07, // max ECC burst (1 byte)
DRIVE_CTRL: 0x08, // drive control (1 byte)
PARK_CYL: 0x0C, // landing zone cylinder (2 bytes)
SEC_TRACK: 0x0E // sectors per track (1 byte)
},
ALT_VIDEO: 0x6D, // IBM VGA BIOS saves original video BIOS vector here
WINCB: {
VECTOR: 0x30 // Windows PM call-back interface (aka Transfer Space Fault)
},
WINDBG: { // Windows Debugger protected-mode interface
VECTOR: 0x41, // (AX==command)
IS_LOADED: 0x004F, // DS_DebLoaded
LOADED: 0xF386, // DS_DebPresent (returned in AX if Windows Debugger loaded)
LOADSEG: 0x0050, // DS_LoadSeg (SI==0 if code, 1 if data; BX==segnum-1; CX==selector; ES:[E]DI->module name)
FREESEG: 0x0052, // DS_FreeSeg (BX==segment)
KRNLVARS: 0x005A, // DS_Kernel_Vars
RELSEG: 0x005C, // DS_ReleaseSeg (same as DS_FreeSeg but "restores any breakpoints first")
LOADHIGH: 0x005D, // D386_LoadCodeDataHigh
EXITCALL: 0x0062, // DS_EXITCALL
LOADDLL: 0x0064, // DS_LOADDLL
DELMODULE: 0x0065, // DS_DELMODULE
UNKNOWN66: 0x0066, // Unknown (but I suspect it isn't good)
UNKNOWN67: 0x0067, // Unknown (but I suspect it isn't good)
REGDOTCMD: 0x0070, // DS_RegisterDotCommand
CHECKFAULT: 0x007F, // DS_CheckFault (BX==fault #, CX==FAULTTYPE bits; return AX=0 to handle fault normally, 1 to issue TRAPFAULT)
FAULTTYPE: {
V86: 0x0001,
PM: 0x0002,
RING0: 0x0004,
FIRST: 0x0008,
LAST: 0x0010
},
TRAPFAULT: 0x0083, // DS_TrapFault (BX==fault #, CX==faulting CS, EDX==faulting EIP, ESI==fault error, EDI==fault flags)
GETSYMBOL: 0x008D, // DS_GetSymbol (DS:ESI->symbol; return AX=0 if success, 1 if not found, 2 if memory not loaded yet)
LOADSEG32: 0x0150, // DS_LoadSeg_32 (SI==0 if code, 1 if data; DX:EBX->D386_Device_Params)
FREESEG32: 0x0152, // DS_FreeSeg_32 (BX==segment, DX:EDI->module name)
CONDBP: 0xF001, // DS_CondBP (break here if WDEB386 was run with /B; ESI -> string to display)
ENABLED: true // support for WINDBG interrupts can be disabled (but NOT if WINDBGRM is enabled)
},
WINDBGRM: { // Windows Debugger real-mode interface
VECTOR: 0x68, // (AH==command)
IS_LOADED: 0x43, // D386_Identify
LOADED: 0xF386, // D386_Id (returned in AX if Windows Debugger loaded)
PREP_PMODE: 0x44, // D386_Prepare_PMode (must return a 16:32 address in ES:EDI to a "PMinit" handler)
FREESEG: 0x48, // D386_Free_Segment (BX==real-mode segment)
REMOVESEGS: 0x4F, // D386_Remove_Segs (remove any undefined segments from the named module at ES:DI)
LOADSEG: 0x50, // D386_Load_Segment (AL=segment type, ES:DI->D386_Device_Params)
ENABLED: true // support for WINDBGRM interrupts can be disabled
},
FUNCS: {} // filled in only if DEBUGGER is true
};
if (DEBUGGER) {
Interrupts.BIOS_DATA = {
0x400: ["RS232_BASE",8], // BASE ADDRESSES OF RS232 ADAPTERS
0x408: ["PRINTER_BASE",8], // BASE ADDRESSES OF PRINTER ADAPTERS
0x410: ["EQUIP_FLAG",2], // INSTALLED HARDWARE FLAGS
0x412: ["MFG_TST",1], // INITIALIZATION FLAGS
0x413: ["MEMORY_SIZE",2], // BASE MEMORY SIZE IN K BYTES (X 1024)
0x415: ["MFG_ERR_FLAG",2], // SCRATCHPAD FOR MANUFACTURING ERROR CODES
0x417: ["KB_FLAG",1], // KEYBOARD SHIFT STATE AND STATUS FLAGS
0x418: ["KB_FLAG_1",1], // SECOND BYTE OF KEYBOARD STATUS
0x419: ["ALT_INPUT",1], // STORAGE FOR ALTERNATE KEY PAD ENTRY
0x41A: ["BUFFER_HEAD",2], // POINTER TO HEAD OF KEYBOARD BUFFER
0x41C: ["BUFFER_TAIL",2], // POINTER TO TAIL OF KEYBOARD BUFFER
0x41E: ["KB_BUFFER",32], // ROOM FOR 15 SCAN CODE ENTRIES
0x43E: ["SEEK_STATUS",1], // DRIVE RECALIBRATION STATUS (BIT 3-0 = DRIVE 3-0 RECALIBRATION BEFORE NEXT SEEK IF BIT IS = 0)
0x43F: ["MOTOR_STATUS",1], // MOTOR STATUS (BIT 3-0 = DRIVE 3-0 CURRENTLY RUNNING, BIT 7 = CURRENT OPERATION IS A WRITE)
0x440: ["MOTOR_COUNT",1], // TIME OUT COUNTER FOR MOTOR(S) TURN OFF
0x441: ["DISKETTE_STATUS",1], // RETURN CODE STATUS BYTE
0x442: ["NEC_STATUS",7], // STATUS BYTES FROM DISKETTE OPERATION
0x449: ["CRT_MODE",1], // CURRENT DISPLAY MODE (TYPE)
0x44A: ["CRT_COLS",2], // NUMBER OF COLUMNS ON SCREEN
0x44C: ["CRT_LEN",2], // LENGTH OF REGEN BUFFER IN BYTES
0x44E: ["CRT_START",2], // STARTING ADDRESS IN REGEN BUFFER
0x450: ["CURSOR_POSN",16], // CURSOR FOR EACH OF UP TO 8 PAGES
0x460: ["CURSOR_MODE",2], // CURRENT CURSOR MODE SETTING
0x462: ["ACTIVE_PAGE",1], // CURRENT PAGE BEING DISPLAYED
0x463: ["ADDR_6845",2], // BASE ADDRESS FOR ACTIVE DISPLAY CARD
0x465: ["CRT_MODE_SET",1], // CURRENT SETTING OF THE 3X8 REGISTER
0x466: ["CRT_PALETTE",1], // CURRENT PALETTE SETTING - COLOR CARD
0x467: ["IO_ROM_INIT",2], // POINTER TO ROM INITIALIZATION ROUTINE
0x469: ["IO_ROM_SEG",2], // POINTER TO I/O ROM SEGMENT
0x46B: ["INTR_FLAG",1], // FLAG INDICATING AN INTERRUPT HAPPENED
0x46C: ["TIMER_LOW",2], // LOW WORD OF TIMER COUNT
0x46E: ["TIMER_HIGH",2], // HIGH WORD OF TIMER COUNT
0x470: ["TIMER_OFL",1], // TIMER HAS ROLLED OVER SINCE LAST READ
0x471: ["BIOS_BREAK",1], // BIT 7=1 IF BREAK KEY HAS BEEN PRESSED
0x472: ["RESET_FLAG",2], // WORD=1234H IF KEYBOARD RESET UNDERWAY
0x474: ["DISK_STATUS1",1], // FIXED DISK STATUS
0x475: ["HF_NUM",1], // COUNT OF FIXED DISK DRIVES
0x476: ["CONTROL_BYTE",1], // HEAD CONTROL BYTE
0x477: ["PORT_OFF",1], // RESERVED (PORT OFFSET)
0x478: ["PRINT_TIM_OUT",4], // TIME OUT COUNTERS FOR PRINTER RESPONSE
0x47C: ["RS232_TIM_OUT",4], // TIME OUT COUNTERS FOR RS232 RESPONSE
0x480: ["BUFFER_START",2], // OFFSET OF KEYBOARD BUFFER START
0x482: ["BUFFER_END",2], // OFFSET OF END OF BUFFER
0x484: ["ROWS",1], // ROWS ON THE ACTIVE SCREEN (LESS 1)
0x485: ["POINTS",2], // BYTES PER CHARACTER
0x487: ["INFO",1], // MODE OPTIONS
0x488: ["INFO_3",3], // FEATURE BIT SWITCHES
0x48B: ["LASTRATE",1], // LAST DISKETTE DATA RATE SELECTED
0x48C: ["HF_STATUS",1], // STATUS REGISTER
0x48D: ["HF_ERROR",1], // ERROR REGISTER
0x48E: ["HF_INT_FLAG",1], // FIXED DISK INTERRUPT FLAG
0x48F: ["HF_CNTRL",1], // COMBO FIXED DISK/DISKETTE CARD BIT 0=1
0x490: ["DSK_STATE",4], // DRIVE 0 MEDIA STATE, DRIVE 1 MEDIA STATE, DRIVE 0 OPERATION START STATE, DRIVE 1 OPERATION START STATE
0x494: ["DSK_TRK",2], // DRIVE 0 PRESENT CYLINDER, DRIVE 1 PRESENT CYLINDER
0x496: ["KB_FLAG_3",1], // KEYBOARD MODE STATE AND TYPE FLAGS
0x497: ["KB_FLAG_2",1], // KEYBOARD LED FLAGS
0x498: ["USER_FLAG",2], // OFFSET ADDRESS OF USERS WAIT FLAG
0x49A: ["USER_FLAG_SEG",2], // SEGMENT ADDRESS OF USER WAIT FLAG
0x49C: ["RTC_LOW",2], // LOW WORD OF USER WAIT FLAG
0x49E: ["RTC_HIGH",2], // HIGH WORD OF USER WAIT FLAG
0x4A0: ["RTC_WAIT_FLAG",1], // WAIT ACTIVE FLAG (01=BUSY, 80=POSTED) (00=POST ACKNOWLEDGED)
0x4A1: ["NET",7], // RESERVED FOR NETWORK ADAPTERS
0x4A8: ["SAVE_PTR",4] // POINTER TO EGA PARAMETER CONTROL BLOCK
},
/*
* See DebuggerX86.prototype.replaceRegs() for the rules governing how register contents are replaced in the strings below.
*
* Replacements occur in the following order:
*
* Replace every @XX (or @XXX), where XX (or XXX) is a register, with the register's value.
* Replace every #XX, where XX is a hex byte value, with the corresponding ASCII character (if printable).
* Replace every $XXXX:XXXX, where XXXX:XXXX is a segmented address, with the zero-terminated string at that address.
* Replace every ^XXXX:XXXX, where XXXX:XXXX is a segmented address, with the FCB filename stored at that address.
*
* The last replacement is obviously DOS-specific, since FCBs are DOS constructs.
*/
Interrupts.FUNCS[Interrupts.DISK] = {
0x00: "disk reset",
0x01: "get status",
0x02: "read drive @DL (@CH:@DH:@CL,@AL) into @ES:@BX",
0x03: "write drive @DL (@CH:@DH:@CL,@AL) from @ES:@BX",
0x04: "verify drive @DL (@CH:@DH:@CL,@AL)",
0x05: "format drive @DL using @ES:@BX",
0x08: "read drive @DL parameters",
0x15: "get drive @DL DASD type",
0x16: "get drive @DL change line status",
0x17: "set drive @DL DASD type",
0x18: "set drive @DL media type"
/*
* Here's an additional function reference, previously in the HDC component, but moved here
* because our components are hardware emulations, not BIOS emulations, so this information is
* really only of interest to the Debugger (or the casual observer).
*
* RESET: 0x00,
* GET_STATUS: 0x01,
* READ_SECTORS: 0x02,
* WRITE_SECTORS: 0x03,
* VERIFY_SECTORS: 0x04,
* FORMAT_TRK: 0x05,
* FORMAT_BAD: 0x06,
* FORMAT_DRIVE: 0x07,
* GET_DRIVEPARMS: 0x08,
* SET_DRIVEPARMS: 0x09,
* READ_LONG: 0x0A,
* WRITE_LONG: 0x0B,
* SEEK: 0x0C,
* ALT_RESET: 0x0D,
* READ_BUFFER: 0x0E,
* WRITE_BUFFER: 0x0F,
* TEST_READY: 0x10,
* RECALIBRATE: 0x11,
* RAM_DIAGNOSTIC: 0x12,
* DRV_DIAGNOSTIC: 0x13,
* CTL_DIAGNOSTIC: 0x14
*/
};
Interrupts.FUNCS[Interrupts.CASSETTE] = {
0x80: "open device",
0x81: "close device",
0x82: "program termination",
0x83: "wait @CX:@DXus for event",
0x84: "joystick support",
0x85: "SYSREQ pressed",
0x86: "wait @CX:@DXus",
0x87: "move block (@CX words)",
0x88: "get extended memory size",
0x89: "processor to virtual mode",
0x90: "device busy loop",
0x91: "interrupt complete flag set"
};
Interrupts.FUNCS[Interrupts.DOS] = {
0x00: "terminate program",
0x01: "read character (AL) from stdin with echo",
0x02: "write character #@DL to stdout",
0x03: "read character (AL) from stdaux", // eg, COM1
0x04: "write character #@DL to stdaux", // eg, COM1
0x05: "write character #@DL to stdprn", // eg, LPT1
0x06: "direct console output (input if @DL=FF)",
0x07: "direct console input without echo",
0x08: "read character (AL) from stdin without echo",
0x09: "write string $@DS:@DX to stdout",
0x0A: "buffered input (DS:DX)", // byte 0 is maximum chars, byte 1 is number of previous characters, byte 2 is number of characters read
0x0B: "get stdin status",
0x0C: "flush buffer and read stdin", // AL is a function # (0x01, 0x06, 0x07, 0x08, or 0x0A)
0x0D: "disk reset",
0x0E: "select default drive @DL", // returns # of available drives in AL
0x0F: "open file using FCB ^@DS:@DX", // DS:DX -> unopened File Control Block
0x10: "close file using FCB ^@DS:@DX",
0x11: "find first matching file using FCB ^@DS:@DX",
0x12: "find next matching file using FCB ^@DS:@DX",
0x13: "delete file using FCB ^@DS:@DX",
0x14: "sequential read from file using FCB ^@DS:@DX",
0x15: "sequential write to file using FCB ^@DS:@DX",
0x16: "create or truncate file using FCB ^@DS:@DX",
0x17: "rename file using FCB ^@DS:@DX",
0x19: "get current default drive (AL)",
0x1A: "set disk transfer area (DTA=@DS:@DX)",
0x1B: "get allocation information for default drive",
0x1C: "get allocation information for specific drive @DL",
0x1F: "get drive parameter block for default drive",
0x21: "read random record from file using FCB ^@DS:@DX",
0x22: "write random record to file using FCB ^@DS:@DX",
0x23: "get file size using FCB ^@DS:@DX",
0x24: "set random record number for FCB ^@DS:@DX",
0x25: "set address @DS:@DX of interrupt vector @AL",
0x26: "create new PSP at segment @DX",
0x27: "random block read from file using FCB ^@DS:@DX",
0x28: "random block write to file using FCB ^@DS:@DX",
0x29: "parse filename $@DS:@SI into FCB @ES:@DI using @AL",
0x2A: "get system date (year=CX, mon=DH, day=DL)",
0x2B: "set system date (year=@CX, mon=@DH, day=@DL)",
0x2C: "get system time (hour=CH, min=CL, sec=DH, 100ths=DL)",
0x2D: "set system time (hour=@CH, min=@CL, sec=@DH, 100ths=@DL)",
0x2E: "set verify flag @AL",
0x2F: "get disk transfer area (DTA=ES:BX)", // DOS 2.00+
0x30: "get DOS version (AL=major, AH=minor)",
0x31: "terminate and stay resident",
0x32: "get drive parameter block (DPB=DS:BX) for drive @DL",
0x33: "extended break check",
0x34: "get address (ES:BX) of InDOS flag",
0x35: "get address (ES:BX) of interrupt vector @AL",
0x36: "get free disk space of drive @DL",
0x37: "get(0)/set(1) switch character @DL (@AL)",
0x38: "get country-specific information",
0x39: "create subdirectory $@DS:@DX",
0x3A: "remove subdirectory $@DS:@DX",
0x3B: "set current directory $@DS:@DX",
0x3C: "create or truncate file $@DS:@DX with attributes @CX",
0x3D: "open file $@DS:@DX with mode @AL",
0x3E: "close file @BX",
0x3F: "read @CX bytes from file @BX into buffer @DS:@DX",
0x40: "write @CX bytes to file @BX from buffer @DS:@DX",
0x41: "delete file $@DS:@DX",
0x42: "set position @CX:@DX of file @BX relative to @AL",
0x43: "get(0)/set(1) attributes @CX of file $@DS:@DX (@AL)",
0x44: "get device information (IOCTL)",
0x45: "duplicate file handle @BX",
0x46: "force file handle @CX to duplicate file handle @BX",
0x47: "get current directory (DS:SI) for drive @DL",
0x48: "allocate memory segment with @BX paragraphs",
0x49: "free memory segment @ES",
0x4A: "resize memory segment @ES to @BX paragraphs",
0x4B: "load program $@DS:@DX using parameter block @ES:@BX",
0x4C: "terminate with return code @AL",
0x4D: "get return code (AL)",
0x4E: "find first matching file $@DS:@DX with attributes @CX",
0x4F: "find next matching file",
0x50: "set current PSP @BX",
0x51: "get current PSP (bx)",
0x52: "get system variables (ES:BX)",
0x53: "translate BPB @DS:@SI to DPB (ES:BP)",
0x54: "get verify flag (AL)",
0x55: "create child PSP at segment @DX",
0x56: "rename file $@DS:@DX to $@ES:@DI",
0x57: "get(0)/set(1) file @BX date @DX and time @CX (@AL)",
0x58: "get(0)/set(1) memory allocation strategy (@AL)", // DOS 2.11+
0x59: "get extended error information", // DOS 3.00+
0x5A: "create temporary file $@DS:@DX with attributes @CX", // DOS 3.00+
0x5B: "create file $@DS:@DX with attributes @CX", // DOS 3.00+ (doesn't truncate existing files like 0x3C)
0x5C: "lock(0)/unlock(1) file @BX region @CX:@DX length @SI:@DI (@AL)", // DOS 3.00+
0x5D: "critical error information (@AL)", // DOS 3.00+ (undocumented)
0x60: "get fully-qualified filename from $@DS:@SI", // DOS 3.00+ (undocumented)
0x63: "get lead byte table (@AL)", // DOS 2.25 and 3.20+
0x6C: "extended open file $@DS:@SI" // DOS 4.00+
};
Interrupts.FUNCS[Interrupts.WINDBG.VECTOR] = {
0x004F: "check debugger loaded" // WINDBG.IS_LOADED returns WINDBG.LOADED (0xF386) if debugger loaded
};
}
/*
* DOS function reference (from https://sites.google.com/site/pcdosretro/dosfuncs)
*
* INT 20 Program terminate (1.0+)
* Entry: CS=PSP
* Exit: Does not return to caller
*
* INT 21 Execute DOS function
* 00 Program terminate (1.0+)
* Entry: CS=PSP
* Exit: Does not return to caller
* 01 Character input (1.0+)
* Entry: None
* Exit: AL=character
* 02 Character output (1.0+)
* Entry: DL=character
* Exit: None
* 03 Auxiliary input (1.0+)
* Entry: None
* Exit: AL=character
* 04 Auxiliary output (1.0+)
* Entry: DL=character
* Exit: None
* 05 Printer output (1.0+)
* Entry: DL=character
* Exit: None
* 06 Direct console I/O (1.0+)
* Entry: DL=FF for console input
* DL=character for console output
* Exit: ZF=0 if a character is ready, AL=character
* ZF=1 if no character is ready
* 07 Direct console input without echo (1.0+)
* Entry: None
* Exit: AL=character
* 08 Console input without echo (1.0+)
* Entry: None
* Exit: AL=character
* 09 Display string (1.0+)
* Entry: DS:DX->string ending with $
* Exit: None
* 0A Buffered keyboard input (1.0+)
* Entry: DS:DX->input buffer (first byte of buffer=maximum input length)
* Exit: second byte of buffer=actual input length
* 0B Get input status (1.0+)
* Entry: None
* Exit: AL=00 no character available
* AL=FF character available
* 0C Flush input buffer and input (1.0+)
* Entry: AL=function number (01,06,07,08,or 0A otherwise flush only)
* DS:DX->input buffer if function 0A
* Exit: AL=character unless function 0A
* 0D Disk reset (1.0+)
* Entry: None
* Exit: None
* 0E Set default drive (1.0+)
* Entry: DL=drive code (0=A)
* Exit: AL=number of logical drives
* 0F Open file (1.0+)
* Entry: DS:DX->unopened FCB
* Exit: AL=00 file opened
* AL=FF file not found
* 10 Close file (1.0+)
* Entry: DS:DX->opened FCB
* Exit: AL=00 file closed
* AL=FF file not found
* 11 Find first file (1.0+)
* Entry: DS:DX->unopened FCB
* Exit: AL=00 matching filename found
* buffer at DTA receives an unopened FCB and directory entry
* original FCB contents:
* FCB search drive code (1=A)
* FCB+1 specified filespec
* FCB+12 search attribute byte
* FCB+13 directory entry offset
* FCB+15 directory cluster (0=root)
* FCB+17 unused
* FCB+21 actual drive code (1=A)
* AL=FF matching filename not found
* Note: The file's directory entry is returned after the FCB drive code.
* If a character device is found then the directory attribute byte
* is set to 40h.
* 12 Find next file (1.0+)
* Entry: DS:DX->unopened FCB from previous 11 or 12 call
* Exit: AL=00 matching filename found
* buffer at DTA receives an unopened FCB and directory entry
* AL=FF matching filename not found
* Note: The file's directory entry is returned after the FCB drive code.
* 13 Delete file (1.0+)
* Entry: DS:DX->unopened FCB
* Exit: AL=00 file deleted
* AL=FF matching filename not found or files are read-only
* 14 Sequential read (1.0+)
* Entry: DS:DX->opened FCB
* Exit: AL=00 file was read
* AL=01 EOF (no data read)
* AL=02 segment wrap
* AL=03 EOF (partial read)
* 15 Sequential write (1.0+)
* Entry: DS:DX->opened FCB
* Exit: AL=00 file was written
* AL=01 disk full
* AL=02 segment wrap
* 16 Create or truncate file (1.0+)
* Entry: DS:DX->unopened FCB
* Exit: AL=00 file created
* AL=FF directory full
* 17 Rename file (1.0+)
* Entry: DS:DX->rename FCB (FCB+11h->new filename)
* Exit: AL=00 file renamed
* AL=FF no matching files found or new filename already exists
* 18 Reserved
* 19 Get default drive (1.0+)
* Entry: None
* Exit: AL=drive code (0=A)
* 1A Set disk transfer address (1.0+)
* Entry: DS:DX=new DTA
* Exit: None
* 1B Get allocation info for default drive (1.0+)
* Entry: None
* Exit: AL=sectors per cluster
* CX=bytes per sector
* DX=clusters per drive
* DS:BX->media descriptor byte
* AL=FF invalid drive
* 1C Get allocation info for specified drive (1.1+)
* Entry: DL=drive code (0=default)
* Exit: Same as function 1B
* 1D Reserved
* 1E Reserved
* 1F Get disk parameter block for default drive (1.1+)
* Entry: None
* Exit: AL=00 drive valid
* DS:BX->disk parameter block
* 0 drive code (0=A) 13 maximum cluster number
* 1 unit code 15 sectors per FAT
* 2 bytes per sector 17 first directory sector
* 4 sectors per cluster-1 19 pointer to device driver
* 5 cluster shift factor 23 media descriptor byte
* 6 first FAT sector 24 access flag (0=accessed)
* 8 number of FATs 25 pointer to next DPB
* 9 number of directory entries 29 last cluster allocated
* 11 first data sector 31 free clusters (-1=unknown)
* AL=FF drive invalid
* Note: (3.x) The sectors per FAT field is one byte and all following
* fields are moved back one byte.
* 20 Reserved
* 21 Random read (1.0+)
* Entry: DS:DX->opened FCB
* Exit: AL=00 file was read
* AL=01 EOF (no data read)
* AL=02 segment wrap
* AL=03 EOF (partial read)
* 22 Random write (1.0+)
* Entry: DS:DX->opened FCB
* Exit: AL=00 file was written
* AL=01 disk full
* AL=02 segment wrap
* 23 Get file size in records (1.0+)
* Entry: DS:DX->unopened FCB
* Exit: AL=00 random record field is set by dividing the file size by the
* specified record size
* AL=FF file not found
* 24 Set random record number (1.0+)
* Entry: DS:DX->opened FCB
* Exit: random record field is set based on record size, current record,
* and current block
* 25 Set interrupt vector (1.0+)
* Entry: DS:DX=new address
* AL=interrupt number
* Exit: None
* 26 Create PSP (1.0+)
* Entry: CS=PSP
* DX=segment for new PSP
* Exit: None
* 27 Random block read (1.0+)
* Entry: DS:DX->opened FCB
* CX=number of records to read
* Exit: AL=00 file was read
* AL=01 EOF (no data read)
* AL=02 segment wrap
* AL=03 EOF (partial read)
* CX=actual number of records read
* 28 Random block write (1.0+)
* Entry: DS:DX->opened FCB
* CX=number of records to write
* Exit: AL=00 file was written
* AL=01 disk full
* AL=02 segment wrap
* CX=actual number of records written
* 29 Parse filename (1.0+)
* Entry: DS:SI->string to parse
* ES:DI->buffer for unopened FCB
* AL=flags
* Bit 0 1=ignore leading separators
* 1 1=modify FCB drive code byte only if a drive is specified
* 2 1=modify FCB filename only if a filename is specified
* 3 1=modify FCB extension only if an extension is specified
* Exit: DS:SI->first character after parsed filename
* AL=00 no wildcard characters in string
* AL=01 wildcard characters in string
* AL=FF invalid drive
* 2A Get date (1.0+)
* Entry: None
* Exit: AL=weekday (0=Sunday)
* CX=year
* DH=month
* DL=day
* 2B Set date (1.0+)
* Entry: CX=year
* DH=month
* DL=day
* Exit: AL=00 date set
* AL=FF invalid date
* 2C Get time (1.0+)
* Entry: None
* Exit: CH=hours
* CL=minutes
* DH=seconds
* DL=hundredths
* 2D Set time (1.0+)
* Entry: CH=hours
* CL=minutes
* DH=seconds
* DL=hundredths
* Exit: AL=00 time set
* AL=FF invalid time
* 2E Set verify flag (1.1+)
* Entry: AL=verify flag (0=off,1=on)
* Exit: None
* 2F Get disk transfer address (2.0+)
* Entry: None
* Exit: ES:BX=DTA
* 30 Get DOS version (2.0+)
* Entry: AL=0 return OEM number (5.0+)
* AL=1 return version flag (5.0+)
* Exit: AL=major version number
* AH=minor version number
* BH=OEM number or version flag (00=RAM,08=ROM)
* BL:CX=24-bit serial number or 0
* 31 Terminate and stay resident (2.0+)
* Entry: AL=return code
* DX=memory size in paragraphs (minimum 6)
* Exit: Does not return to caller
* 32 Get disk parameter block for specified drive (2.0+)
* Entry: DL=drive code (0=default)
* Exit: Same as function 1F
* 33 Get or set Ctrl-Break (2.0+)
* Entry: AL=0 get break
* AL=1 set break
* AL=2 swap break (*) (3.1+)
* AL=5 get boot drive (4.0+)
* AL=6 get DOS version (5.0+)
* DL=break flag if set or swap (0=off,1=on)
* Exit: if function 00 or 02:
* DL=break flag
* if function 05:
* DL=boot drive code (1=A)
* if function 06:
* BL=major version
* BH=minor version
* DL=revision (0=A)
* DH=version flag (00=low,08=ROM,10=HMA)
* 34 Get InDOS flag pointer (2.0+)
* Entry: None
* Exit: ES:BX->InDOS flag
* Note: The DOS critical error flag immediately precedes this byte.
* 35 Get interrupt vector (2.0+)
* Entry: AL=interrupt number
* Exit: ES:BX=interrupt address
* 36 Get free disk space (2.0+)
* Entry: DL=drive code (0=default)
* Exit: AX=sectors per cluster
* BX=free clusters
* CX=bytes per sector
* DX=clusters per drive
* AX=FFFF if drive invalid
* 37 Get or set switch character (*) (2.0+)
* Entry: AL=0 get switch character
* AL=1 set switch character
* DL=switch character if set
* Exit: DL=switch character if get
* Note: (5.0+) Function 3701 has been disabled.
* 38 Get or set country info (2.0+)
* Entry: AL=country code (0=default)
* BX=country code if AL=FF (3.0+)
* DX=FFFF if set request (2.11+)
* DS:DX->buffer if get request
* Exit: CF=0 BX=country code if get request (3.0+)
* buffer format:
* 0 date format (0=USA,1=Europe,2=Japan)
* 2 currency symbol string
* 7 thousands separator
* 9 decimal separator
* 11 date separator
* 13 time separator
* 15 currency format
* 0 symbol before amount, no space between
* 1 symbol after amount, no space between
* 2 symbol before amount, 1 space between
* 3 symbol after amount, 1 space between
* 4 symbol replaces decimal separator
* 16 digits after decimal in currency
* 17 time format (0=12-hour,1=24-hour)
* 18 case map call address
* 22 data list separator
* 24 reserved (10 bytes)
* CF=1 AX=error code
* 39 Create directory (2.0+)
* Entry: DS:DX->directory name
* Exit: CF=0 None
* CF=1 AX=error code
* 3A Remove directory (2.0+)
* Entry: DS:DX->directory name
* Exit: CF=0 None
* CF=1 AX=error code
* 3B Change current directory (2.0+)
* Entry: DS:DX->directory name
* Exit: CF=0 None
* CF=1 AX=error code
* 3C Create or truncate file (2.0+)
* Entry: DS:DX->filename
* CX=file attributes
* Exit: CF=0 AX=file handle
* CF=1 AX=error code
* 3D Open file (2.0+)
* Entry: DS:DX->filename
* AL=open mode
* Bit 0-2 access mode
* 000=read
* 001=write
* 010=read/write
* 4-6 sharing mode (3.0+)
* 000=compatibility
* 001=deny read/write access
* 010=deny write access
* 011=deny read access
* 100=deny none access
* 7 inheritance flag
* 0=file inherited by EXECed programs
* 1=file not inherited by EXECed programs
* Exit: CF=0 AX=file handle
* CF=1 AX=error code
* 3E Close file (2.0+)
* Entry: BX=file handle
* Exit: CF=0 None
* CF=1 AX=error code
* 3F Read file or device (2.0+)
* Entry: BX=file handle
* CX=bytes to read
* DS:DX->input buffer
* Exit: CF=0 AX=number of bytes read (0=EOF)
* CF=1 AX=error code
* 40 Write file or device (2.0+)
* Entry: BX=file handle
* CX=bytes to write (0=truncate file)
* DS:DX->output buffer
* Exit: CF=0 AX=number of bytes written (0=disk full)
* CF=1 AX=error code
* 41 Delete file (2.0+)
* Entry: DS:DX->filename
* Exit: CF=0 None
* CF=1 AX=error code
* 42 Move file pointer (2.0+)
* Entry: AL=code (0=absolute,1=relative,2=relative to EOF)
* BX=file handle
* CX:DX=offset
* Exit: CF=0 DX:AX=new pointer
* CF=1 AX=error code
* 43 Get or set file attributes (2.0+)
* Entry: AL=0 get attributes
* AL=1 set attributes
* CX=file attributes if set
* Bit 0 1=read-only
* 1 1=hidden
* 2 1=system
* 4 1=directory (get only)
* 5 1=archive
* DS:DX->filename
* Exit: CF=0 CX=file attributes if get
* CF=1 AX=error code
* 44 I/O control for devices (2.0+)
* Notes: 1) Functions 02-05 work only if bit 14 of the device driver
* attribute word is set.
* 2) Function 08 works only if bit 11 of the device driver
* attribute word is set.
* 3) Functions 0C-0F work only if bit 6 of the device driver
* attribute word is set.
* 4) Functions 10-11 work only if bit 7 of the device driver
* attribute word is set.
* 00 Get device attributes (2.0+)
* Entry: BX=file handle
* Exit: CF=0 DX=device attributes
* Character devices:
* Bit 0 1=console input
* 1 1=console output
* 2 1=NUL device
* 3 1=CLOCK device
* 4 1=INT 29 output (CON)
* 5 0=ASCII,1=binary
* 6 0=EOF on input
* 7 1=character device
* 11 1=open/close supported
* 13 1=output until busy supported
* 14 1=IOCTL supported
* Block devices:
* Bit 0-5 drive code (0=A)
* 6 0=file has been written
* 7 0=block device
* CF=1 AX=error code
* 01 Set device attributes (2.0+)
* Entry: BX=file handle (character devices only)
* DX=device attributes (DH must be 0)
* Exit: CF=0 None
* CF=1 AX=error code
* 02 Read from character device (2.0+)
* 03 Write to character device (2.0+)
* Entry: BX=file handle
* CX=number of bytes
* DS:DX->buffer
* Exit: CF=0 AX=number of bytes transferred
* CF=1 AX=error code
* 04 Read from block device (2.0+)
* 05 Write to block device (2.0+)
* Entry: BL=drive code (0=default)
* CX=number of bytes
* DS:DX->buffer
* Exit: CF=0 AX=number of bytes transferred
* CF=1 AX=error code
* 06 Get input status (2.0+)
* 07 Get output status (2.0+)
* Entry: BX=file handle
* Exit: CF=0 AL=status (00=not ready,FF=ready)
* CF=1 AX=error code
* 08 Removable media check (3.0+)
* Entry: BL=drive code (0=default)
* Exit: CF=0 AX=value (0=removable,1=fixed)
* CF=1 AX=error code
* 09 Local/remote drive check (3.0+)
* Entry: BL=drive code (0=default)
* Exit: CF=0 DX=device attributes
* Bit 1 1=32-bit sectors supported
* 6 1=generic IOCTL calls supported
* 7 1=query IOCTL call supported
* 9 1=shared drive; direct I/O not allowed
* 11 1=removable media call supported
* 12 1=remote drive
* 13 1=media descriptor in FAT required
* 14 1=IOCTL calls supported
* 15 1=SUBSTed
* CF=1 AX=error code
* 0A Local/remote handle check (3.0+)
* Entry: BX=file handle
* Exit: CF=0 DX=device attributes from SFT
* Character devices:
* Bit 0 1=console input
* 1 1=console output
* 2 1=NUL device
* 3 1=CLOCK device
* 4 1=INT 29 output (CON)
* 5 0=ASCII,1=binary
* 6 0=EOF on input
* 7 1=character device
* 11 1=network spooler
* 12 1=no inherit
* 13 1=named pipe
* 15 1=remote
* Block devices:
* Bit 0-5 drive code (0=A)
* 6 0=file has been written
* 7 0=block device
* 12 1=no inherit
* 14 1=date/time set
* 15 1=remote
* CF=1 AX=error code
* 0B Change sharing retry count (3.0+)
* Entry: CX=delay loop count
* DX=retry count
* Exit: None
* 0C Generic IOCTL for handles (3.2+)
* Entry: BX=file handle
* CH=category code (01=AUX,03=CON,05=PRN)
* CL=function code
* 45 set printer retry count
* 4A set code page (3.3+)
* 4C prepare start (3.3+)
* 4D prepare end (3.3+)
* 5F set display info (4.0+)
* 65 get printer retry count
* 6A get code page (3.3+)
* 6B get prepare list (3.3+)
* 7F get display info (4.0+)
* DS:DX->parameter block or retry count word
* Exit: CF=0 None
* CF=1 AX=error code
* Get/set code page and prepare end parameter block format:
* 0 length (2)
* 2 code page
* Prepare start parameter block format:
* 0 flags (device specific)
* 2 data length
* 4 number of code pages
* 6 code pages (-1=perform a refresh operation)
* Get prepare list parameter block format:
* 0 data length
* 2 number of hardware code pages
* 4 hardware code pages
* n number of prepared code pages
* n+2 prepared code pages
* Display info parameter block format:
* 0 info level (must be 0)
* 1 reserved
* 2 data length (14)
* 4 flags
* Bit 0 (0=blink,1=intensity)
* 6 mode (1=text,2=graphics)
* 7 reserved
* 8 colors
* 10 pixel columns
* 12 pixel rows
* 14 character columns
* 16 character rows
* 0D Generic IOCTL for drives (3.2+)
* Entry: BL=drive code (0=default)
* CH=category code (08=disk)
* CL=function code
* 40 set device parameters
* 41 write track
* 42 format track
* 46 set media info (4.0+)
* 47 set access flag (4.0+)
* 60 get device parameters
* 61 read track
* 62 verify track
* 66 get media info (4.0+)
* 67 get access flag (4.0+)
* 68 sense media type (5.0+)
* DS:DX->parameter block
* Exit: CF=0 None
* CF=1 AX=error code
* Get/set device parameter block format:
* 0 flags (only bit 0 is used by get)
* Bit 0 0=return default BPB/build new BPB
* 1=return build BPB/use device BPB
* 1 0=read all fields
* 1=read track layout only
* 2 0=sector sizes vary
* 1=sector sizes equal
* 1 drive type
* 0=360K 5=fixed
* 1=1.2M 6=tape
* 2=720K 7=1.44M
* 3=8" single sided 8=read/write optical
* 4=8" double sided 9=2.88M
* 2 attributes
* Bit 0 1=non-removable
* 1 1=changeline supported
* 4 cylinders
* 6 density (0=high,1=double)
* 7 BIOS parameter block
* 32 reserved
* 38 track layout count
* 40 track layout words (sector number,sector size)
* Note: Track layout fields are used by set only.
* Read/write parameter block format:
* 0 reserved
* 1 head
* 3 cylinder
* 5 sector
* 7 number of sectors
* 9 buffer address
* Format/verify parameter block format:
* 0 reserved
* 1 head
* 3 cylinder
* Get/set media info parameter block format:
* 0 info level (must be 0)
* 2 volume serial number
* 6 volume label
* 17 8-byte file system type
* Get/set access flag parameter block format:
* 0 reserved
* 1 access flag (0=disallow disk access,1=allow disk access)
* Sense media type parameter block format:
* 0 media type flag (0=other,1=default)
* 1 media type (2=720K,7=1.44M,9=2.88M)
* 0E Get logical drive map (3.2+)
* 0F Set logical drive map (3.2+)
* Entry: BL=logical drive code (0=default)
* Exit: CF=0 AL=physical drive code (0=only 1 logical drive mapped)
* CF=1 AX=error code
* 10 Query IOCTL for handles (5.0+)
* Entry: BX=file handle
* CH=category code (01=AUX,03=CON,05=PRN)
* CL=function code
* Exit: CF=0 None
* CF=1 AX=error code
* 11 Query IOCTL for drives (5.0+)
* Entry: BL=drive code (0=default)
* CH=category code (08=disk)
* CL=function code
* Exit: CF=0 None
* CF=1 AX=error code
* 45 Duplicate handle (2.0+)
* Entry: BX=file handle
* Exit: CF=0 AX=new file handle
* CF=1 AX=error code
* 46 Redirect handle (2.0+)
* Entry: BX=file handle
* CX=file handle to redirect
* Exit: CF=0 None
* CF=1 AX=error code
* Note: If the handle to redirect is opened then it is closed before
* being redirected.
* 47 Get current directory (2.0+)
* Entry: DS:SI->64-byte buffer for pathname
* DL=drive code (0=default)
* Exit: CF=0 None
* CF=1 AX=error code
* 48 Allocate memory (2.0+)
* Entry: BX=number of paragraphs to allocate
* Exit: CF=0 AX=segment of allocated block
* CF=1 AX=error code
* BX=size of largest available block
* 49 Release memory (2.0+)
* Entry: ES=segment of block to release
* Exit: CF=0 None
* CF=1 AX=error code
* 4A Reallocate memory (2.0+)
* Entry: BX=number of paragraphs to allocate
* ES=segment of block to reallocate
* Exit: CF=0 None
* CF=1 AX=error code
* BX=size of largest available block
* 4B Execute program (2.0+)
* Entry: AL=0 execute program
* AL=1 load program
* AL=3 load overlay
* AL=5 enter exec state (5.0+)
* DS:DX->filename or exec state parameter block
* ES:BX->parameter block (unused by enter exec state)
* if function 00 or 01:
* 0 environment block segment or 0
* 2 command tail pointer
* 6 FCB1 pointer
* 10 FCB2 pointer
* if function 03:
* 0 segment where file will be loaded
* 2 relocation factor
* if function 05:
* 0 reserved
* 2 flags (0=COM,1=EXE,2=overlay)
* 4 program name pointer
* 8 PSP
* 10 program CS:IP
* 14 doubleword program size
* Exit: CF=0 BX and DX may be destroyed
* parameter block if load only:
* 14 SS:SP of loaded program
* 18 CS:IP of loaded program
* CF=1 AX=error code
* Note: After calling function 4B01 the current PSP is set to that of
* the loaded program. Before executing the program, DS and ES
* should be set to the program's PSP and the INT 22 vector in the
* program's PSP should be set to a valid return address.
* 4C Terminate with return code (2.0+)
* Entry: AL=return code
* Exit: Does not return to caller
* 4D Get program return code (2.0+)
* Entry: None
* Exit: AL=return code
* AH=exit type (0=normal,1=Ctrl-C,2=critical error,3=TSR)
* 4E Find first file (2.0+)
* Entry: DS:DX->filespec
* CX=file attributes
* Exit: CF=0 DTA search drive code (1=A)
* DTA+1 search filespec
* DTA+12 search attribute byte
* DTA+13 directory entry offset
* DTA+15 directory cluster (0=root)
* DTA+17 unused
* DTA+21 attribute byte (40h=character device)
* DTA+22 file time
* DTA+24 file date
* DTA+26 file size
* DTA+30 filename
* CF=1 AX=error code
* 4F Find next file (2.0+)
* Entry: Bytes 0-20 of buffer at DTA must be set from previous 4E or 4F call
* Exit: Same as function 4E
* 50 Set current PSP (2.0+)
* Entry: BX=PSP segment
* Exit: None
* 51 Get current PSP (2.0+)
* Entry: None
* Exit: BX=PSP segment
* 52 Get DOS internal pointers (*) (2.0+)
* Entry: None
* Exit: ES:BX->DOS internal pointers
* -02h memory chain anchor
* +00h pointer to disk parameter blocks
* +04h pointer to system file tables
* +08h pointer to CLOCK$ device header
* +0Ch pointer to CON device header
* +10h disk buffer size
* +12h pointer to disk buffer chain (3.x)
* pointer to disk buffer control block (4.0+)
* +16h pointer to current directory structures
* +1Ah pointer to FCB system file tables
* +1Eh FCB keep count
* +20h number of actual drives
* +21h number of logical drives
* +22h NUL device header
* 53 Create disk parameter block (*) (2.0+)
* Entry: DS:SI->BIOS parameter block
* 0 bytes per sector
* 2 sectors per cluster
* 3 number of reserved sectors
* 5 number of FATs
* 6 number of root directory entries
* 8 total number of sectors
* 10 media descriptor byte
* 11 sectors per FAT
* 13 sectors per track
* 15 number of heads
* 17 number of hidden sectors
* 21 32-bit number of sectors if word at 8=0
* ES:BP->buffer for disk parameter block
* Exit: None
* 54 Get verify flag (2.0+)
* Entry: None
* Exit: AL=verify flag (0=off,1=on)
* 55 Create program PSP (*) (2.0+)
* Entry: DX=segment for new PSP
* SI=new end of allocation
* Exit: None
* Note: After calling function 55 the current PSP is set to the new PSP.
* 56 Rename file (2.0+)
* Entry: DS:DX->old filename
* ES:DI->new filename
* Exit: CF=0 None
* CF=1 AX=error code
* Note: This function can also rename a directory or move a file from
* one directory to another.
* 57 Get or set file date and time (2.0+)
* Entry: AL=0 get date and time
* AL=1 set date and time
* BX=file handle
* CX=time if set
* Bits 0-4 seconds/2 (0-29)
* 5-10 minutes (0-59)
* 11-15 hours (0-23)
* DX=date if set
* Bits 0-4 day (1-31)
* 5-8 month (1-12)
* 9-15 year-1980
* Exit: CF=0 CX=time if get
* DX=date if get
* CF=1 AX=error code
* 58 Get or set allocation strategy (2.11+)
* Entry: AL=0 get strategy
* AL=1 set strategy
* AL=2 get UMB link state (5.0+)
* AL=3 set UMB link state (5.0+)
* BX=strategy code or UMB link state (0=unlink,1=link)
* 00=first fit
* 01=best fit
* 02=last fit
* 40=first fit, high only (5.0+)
* 41=best fit, high only (5.0+)
* 42=last fit, high only (5.0+)
* 80=first fit, high first (5.0+)
* 81=best fit, high first (5.0+)
* 82=last fit, high first (5.0+)
* Exit: CF=0 AX=strategy code or UMB link state if get
* CF=1 AX=error code
* 59 Get extended error info (3.0+)
* Entry: None
* Exit: AX=extended error code
* BH=error class
* BL=suggested action
* CH=locus
* ES:DI->volume label for invalid disk change error or 0
* 5A Create unique file (3.0+)
* Entry: DS:DX->pathname ending with \
* CX=file attributes
* Exit: CF=0 AX=file handle (filename is appended to pathname)
* CF=1 AX=error code
* 5B Create new file (3.0+)
* Entry: DS:DX->filename
* CX=file attributes
* Exit: CF=0 AX=file handle
* CF=1 AX=error code
* 5C Lock or unlock file (3.0+)
* Entry: AL=0 lock
* AL=1 unlock
* BX=file handle
* CX:DX=region offset
* SI:DI=region length
* Exit: CF=0 None
* CF=1 AX=error code
* Note: File sharing (SHARE.EXE) must be loaded to use this function.
* 5D File sharing functions (*) (3.0+)
* Notes: 1) Some functions use a parameter block with the following format:
* AX,BX,CX,DX,SI,DI,DS,ES,reserved,machine #,process (PSP)
* 2) Functions 02-05 work only if file sharing (SHARE.EXE) is loaded.
* 3) Functions 07-09 work only if the redirector (REDIR.EXE) is loaded.
* 00 Server DOS call (*) (3.0+)
* Entry: DS:DX->parameter block (AX,BX,CX,DX,SI,DI,DS,ES,machine #,process)
* Exit: Depends on called function
* 01 Commit all local files (*) (3.0+)
* Entry: None
* Exit: None
* 02 Close all occurrences of file (*) (3.0+)
* Entry: DS:DX->parameter block (DS:DX->qualified filespec)
* Exit: CF=0 None
* CF=1 AX=error code
* 03 Close all files for machine (*) (3.0+)
* Entry: DS:DX->parameter block (machine #)
* Exit: CF=0 None
* CF=1 AX=error code
* 04 Close all files for machine and process (*) (3.0+)
* Entry: DS:DX->parameter block (machine #,process)
* Exit: CF=0 None
* CF=1 AX=error code
* 05 Get shared file info (*) (3.0+)
* Entry: DS:DX->parameter block (BX=share file table index,CX=SFT index)
* Exit: CF=0 AX=device info from SFT
* BX=machine #
* CX=lock count
* ES:DI->qualified filename
* CF=1 AX=error code
* 06 Get DOS swappable data area (*) (3.0+)
* Entry: None
* Exit: DS:SI->DOS swappable data area
* CX=DOS swappable data area length
* DX=DOS critical data area length
* Note: The first byte of the data area is the critical error flag.
* 07 Get print stream state (*) (3.1+)
* Entry: None
* Exit: DL=state (0=truncate off,1=truncate on)
* 08 Set print stream state (*) (3.1+)
* Entry DL=state (0=truncate off,1=truncate on)
* Exit: None
* 09 Truncate print stream (*) (3.1+)
* Entry None
* Exit: None
* 0A Set extended error info (3.1+)
* Entry: DS:DX->parameter block (see function 59 for affected registers)
* Exit: None
* 5E Network functions (3.0+)
* Note: Functions 02-05 work only if the redirector (REDIR.EXE) is loaded.
* 00 Get machine name (3.0+)
* Entry: DS:DX->buffer for machine name
* Exit: CH=validity flag (0=invalid,1=valid)
* CL=netbios number
* 01 Set machine name (*) (3.0+)
* Entry: DS:DX->machine name
* CH=validity flag (0=invalid,1=valid)
* CL=netbios number
* Exit: None
* 02 Set printer string (3.1+)
* Entry: DS:SI->printer setup string
* BX=redirection list index
* CX=printer setup string length
* Exit: CF=0 None
* CF=1 AX=error code
* 03 Get printer string (3.1+)
* Entry: ES:DI->buffer for printer setup string
* BX=redirection list index
* Exit: CF=0 CX=printer setup string length
* CF=1 AX=error code
* 04 Set print mode (*) (3.1+)
* Entry: BX=redirection list index
* DX=print mode (0=text,1=binary)
* Exit: CF=0 None
* CF=1 AX=error code
* 05 Get print mode (*) (3.1+)
* Entry: BX=redirection list index
* Exit: CF=0 DX=print mode (0=text,1=binary)
* CF=1 AX=error code
* 5F Network redirection functions (3.1+)
* Notes: 1) Functions 00-05 work only if the redirector (REDIR.EXE) is loaded.
* 2) Functions 07-08 work only on builtin drives.
* 00 Get redirection mode (*) (3.1+)
* Entry: BL=device type (3=printer,4=disk)
* Exit: CF=0 BH=redirection mode (0=off,1=on)
* CF=1 AX=error code
* 01 Set redirection mode (*) (3.1+)
* Entry: BL=device type (3=printer,4=disk)
* BH=redirection mode (0=off,1=on)
* Exit: CF=0 None
* CF=1 AX=error code
* 02 Get redirection list entry (3.1+)
* Entry: DS:SI->16-byte buffer for local device name
* ES:DI->128-byte buffer for remote device name
* BX=redirection list index
* Exit: CF=0 BH=status (0=valid,1=invalid)
* BL=device type (3=printer,4=disk)
* CX=user word
* CF=1 AX=error code
* 03 Set redirection list entry (3.1+)
* Entry: DS:SI->local device name
* ES:DI->remote device name
* BL=device type (3=printer,4=disk)
* CX=user word
* Exit: CF=0 None
* CF=1 AX=error code
* 04 Cancel redirection list entry (3.1+)
* Entry: DS:SI->local device name
* Exit: CF=0 None
* CF=1 AX=error code
* 05 Get redirection list entry extended (*) (4.0+)
* Entry: DS:SI->16-byte buffer for local device name
* ES:DI->128-byte buffer for remote device name
* BX=redirection list index
* Exit: CF=0 BH=status (0=valid,1=invalid)
* BL=device type (3=printer,4=disk)
* CX=user word
* BP=netbios session number
* CF=1 AX=error code
* 07 Enable drive (*) (4.0+)
* Entry: DL=drive code (0=default)
* Exit: CF=0 None
* CF=1 AX=error code
* 08 Disable drive (*) (4.0+)
* Entry: DL=drive code (0=default)
* Exit: CF=0 None
* CF=1 AX=error code
* 60 Qualify filename (*) (3.0+)
* Entry: DS:SI->filespec
* ES:DI->buffer for qualified filespec
* Exit: CF=0 None
* CF=1 AX=error code
* 61 Reserved
* 62 Get current PSP (3.0+)
* Entry: None
* Exit: BX=PSP segment
* 63 Get DBCS lead byte table pointer (*) (3.0+)
* Entry: AL must be 0
* Exit: DS:SI->DBCS lead byte table
* 64 Set wait for external event flag (*) (3.2+)
* Entry: AL=flag (0=enable,>0=disable)
* Exit: None
* Note: This function affects the PC Convertible only.
* If enabled and the default console driver is being used then
* INT 15 function 41 is issued while waiting for console input
* during functions 01,08,0A,and 3F.
* 65 Get extended country info (3.3+)
* Entry: AL=01 get extended country info
* 02 get country uppercase table
* 03 get country lowercase table (reserved until 6.2)
* 04 get country filename uppercase table
* 05 get country filename character table
* 06 get country collating table
* 07 get DBCS vector table (4.0+)
* 20 uppercase character (4.0+)
* 21 uppercase string (4.0+)
* 22 uppercase ASCIIZ string (4.0+)
* 23 yes/no check (*) (4.0+)
* A0 uppercase filename character (*) (4.0+)
* A1 uppercase filename string (*) (4.0+)
* A2 uppercase filename ASCIIZ string (*) (4.0+)
* A3 yes/no check (*) (4.0+)
* if function 01-07:
* BX=code page (-1=active code page)
* CX=length to return (must be at least 5)
* DX=country code (-1=default)
* ES:DI->return buffer
* if function 20,23,A0,A3:
* DL=character
* if function 21,A1:
* DS:DX->string
* CX=string length
* if function 22,A2:
* DS:DX->string
* Exit: CF=0 CX=data length if function 01-07
* DL=character if function 20
* AX=code if function 23,A3 (0=no,1=yes,2=neither)
* CF=1 AX=error code
* buffer format if function 01:
* 0 info ID
* 1 length
* 3 country code
* 5 code page
* 7 country info (same format as function 38)
* buffer format if function 02-07:
* 0 info ID
* 1 pointer to requested table (word length followed by data)
* 66 Get or set code page (3.3+)
* Entry: AL=1 get code page
* AL=2 set code page
* BX=active code page if set
* Exit: CF=0 BX=active code page if get
* DX=default code page if get
* CF=1 AX=error code
* 67 Set handle count (3.3+)
* Entry: BX=handle count
* Exit: CF=0 None
* CF=1 AX=error code
* 68 Commit file (3.3+)
* Entry: BX=file handle
* Exit: CF=0 None
* CF=1 AX=error code
* 69 Get or set media info (*) (4.0+)
* Entry: AL=0 get media info
* AL=1 set media info
* BL=drive code (0=default)
* DS:DX->media info
* Exit: CF=0 None
* CF=1 AX=error code
* Media info format:
* 0 info level (must be 0)
* 2 volume serial number
* 6 volume label
* 17 8-byte file system type
* 6A Commit file (*) (4.0+)
* Entry: Same as function 68
* Exit: Same as function 68
* 6B Reserved
* 6C Extended open/create file (4.0+)
* Entry: DS:SI->filename
* BX=open mode
* Bit 0-2 access mode
* 000=read
* 001=write
* 010=read/write
* 4-6 sharing mode
* 000=compatibility
* 001=deny read/write access
* 010=deny write access
* 011=deny read access
* 100=deny none access
* 7 inheritance flag
* 0=file inherited by EXECed programs
* 1=file not inherited by EXECed programs
* 13 critical error handling
* 0=execute INT 24
* 1=return error code
* 14 buffering
* 0=buffer writes
* 1=don't buffer writes
* CX=file attributes
* DX=open flags
* Bit 0-3 0000=fail if exists
* 0001=open if exists
* 0010=truncate if exists
* 4-7 0000=fail if doesn't exist
* 0001=create if doesn't exist
* Exit: CF=0 AX=file handle
* CX=action code (1=file opened,2=file created,3=file truncated)
* CF=1 AX=error code
*
* INT 22 Terminate address (1.0+)
* This is the address that DOS returns to after program termination.
* It is set during execute program (function 4B) processing.
*
* INT 23 Ctrl-Break handler address (1.0+)
* This routine is entered when Ctrl-Break is detected by DOS.
* On entry the registers are set to the values they had at the start
* of the interrupted function call. Control may be returned via
* IRET or FAR RET, if FAR RET is used and the carry flag is set
* then the program is aborted otherwise the function is restarted.
* Note: Any DOS function may be issued from an INT 23 handler.
*
* INT 24 Critical error handler address (1.0+)
* Entry: AH=error indicator
* Bit 0 0=read error
* 1=write error
* 1-2 disk area
* 00=DOS area
* 01=FAT
* 10=directory
* 11=data area
* 3 1=fail allowed
* 4 1=retry allowed
* 5 1=ignore allowed
* 7 0=block device error
* 1=character device error
* AL=drive code (0=A)
* DI=error code (lower half of DI)
* 00=write-protect error 07=unknown media type
* 01=unknown unit 08=sector not found
* 02=drive not ready 09=printer out of paper
* 03=unknown command 0A=write fault
* 04=data error (CRC) 0B=read fault
* 05=bad request structure length 0C=general failure
* 06=seek error 0F=invalid disk change
* BP:SI=pointer to device driver header
* Exit: Control may be returned to DOS via IRET with an action code in AL
* 0=ignore error (fail if ignore is unallowed)
* 1=retry function (fail if retry is unallowed)
* 2=abort program
* 3=fail system call (abort if fail is unallowed)
* Control may be returned directly to the program by removing the
* INT 24 registers (IP,CS,flags) from the stack, restoring the
* program's registers (AX,BX,CX,DX,SI,DI,BP,DS,ES) and issuing
* an IRET. This will leave DOS in an unstable state because the
* critical error flag is set until a DOS function other than 01-0C,
* 33,50,51,59,62,or 64 is issued.
* Note: Only DOS functions 01-0C,33,50,51,59,62,or 64 should be issued from
* an INT 24 handler.
*
* INT 25 Absolute disk read (1.0+)
* Entry: AL=drive number (0=A)
* CX=number of sectors or -1 if >32M partition
* DX=starting sector number
* DS:BX->data buffer or parameter block
* parameter block (3.31+)
* 0 starting sector number
* 4 number of sectors
* 6 data buffer
* Exit: CF=0 None
* CF=1 AH=error code
* 01=bad command
* 02=bad address mark
* 03=write-protect error
* 04=sector not found
* 08=DMA overrun
* 10=data error (bad CRC)
* 20=controller error
* 40=seek error
* 80=timed-out
* AL=device error code (same as lower byte of DI for INT 24)
* Notes: 1) The CPU flags are still on the stack after an INT 25 or INT 26.
* 2) All registers except the segment registers and SP may be destroyed.
*
* INT 26 Absolute disk write (1.0+)
* Entry: Same as INT 25
* Exit: Same as INT 25
*
* INT 27 Terminate and stay resident (1.0+)
* Entry: CS=PSP
* DX=number of bytes to stay resident (minimum 96)
* Exit: Does not return to caller
*
* INT 28 Idle handler (2.0+)
* This interrupt is issued by DOS during functions 01-0C to indicate
* that a TSR program may safely issue a non-character I/O DOS
* function even though the InDOS flag is not zero.
* DOS functions 01-0C should not be issued from a INT 28 handler
* unless the critical error flag is set first.
*
* INT 29 Character output (2.0+)
* Entry: AL=character
* Exit: None
* Note: This interrupt is called for character output if the console
* device has bit 4 in the device attribute word set.
*
* INT 2A Network/critical section (*) (3.0+)
* 00 Network installation check (3.0+)
* Entry: None
* Exit: AH=00 not installed
* AH=FF installed
* 01 Execute NETBIOS request with no error retry (*) (3.0+)
* Entry: ES:BX->network control block
* Exit: AH=0 no error
* AH=1 AL=error code
* 02 Set network printer parameters (*) (3.0+)
* Entry: DS:SI->16-byte buffer for local device name
* BX=characters per line (-1=use current)
* CX=lines per inch (-1=use current)
* Exit: CF=0 None
* CF=1 AX=error code
* 03 Check direct I/O (3.0+)
* Entry: DS:SI->ASCIIZ disk name (d:)
* Exit: CF=0 direct I/O allowed
* CF=1 direct I/O not allowed
* 04 Execute NETBIOS request (3.0+)
* Entry: AL=error retry flag (0=retry,1=no retry)
* ES:BX->network control block
* Exit: AH=0 no error
* AH=1 AL=error code
* 05 Get network resource information (3.0+)
* Entry: None
* Exit: BX=available network name count
* CX=available network control block count
* DX=available network session count
* 06 Network print stream control (3.0+)
* Entry: AL=mode (1=concatenation,2=truncation,3=truncate stream)
* Exit: CF=0 None
* CF=1 AX=error code
* 80 Begin critical section (*) (3.0+)
* Entry: AL=critical section number
* Exit: None
* 81 End critical section (*) (3.0+)
* Entry: AL=critical section number
* Exit: None
* 82 End all critical sections (*) (3.0+)
* Entry: None
* Exit: None
* 84 Keyboard idle loop (*) (3.0+)
* Entry: None
* Exit: None
*
* INT 2E Execute command (*) (2.0+)
* Entry: DS:SI->command string-1 followed by a carriage return
* Exit: All registers except CS and IP are destroyed
* Note: This function is not re-entrant and should not be issued from a
* batch file.
*
* INT 2F Multiplex (3.0+)
* Entry: AH=program identifier
* AL=function code
* Other registers depend on the function
* Exit: Depends on the function
*
* Program identifier codes:
* 01 Print queueing (PRINT) (3.0+)
* 02 Network printer control (REDIR) (3.1+)
* 05 Network error message lookup (REDIR) (3.0+)
* 06 ASSIGN (3.1+)
* 08 IBMBIO drive services (used by DRIVER.SYS) (3.2+)
* 10 File sharing (SHARE) (3.0+)
* 11 Redirector services (REDIR and MSCDEX) (3.0+)
* 12 DOS internal services (used by REDIR and MSCDEX) (3.0+)
* 13 Swap INT 13 vector (3.2+)
* 14 NLS support (NLSFUNC) (3.3+)
* 15 CD-ROM extensions (MSCDEX)
* 16 Windows services
* 17 Windows clipboard services
* 1A ANSI.SYS (4.0+)
* 43 XMS services (HIMEM.SYS)
* 46 Windows support
* 48 DOSKEY (5.0+)
* 4A DOS services (HMA, RPL), SMARTDRV (5.0+)
* 53 POWER (APM events broadcast) (5.02+)
* 54 POWER (main API) (5.02+)
* 55 COMMAND.COM (5.0+)
* 56 INTERLNK (5.02+)
* AC GRAPHICS (5.0+)
* AD DISPLAY.SYS, KEYB (3.3+)
* AE Installable command support (APPEND) (3.3+)
* B0 GRAFTABL (3.3+)
* B7 APPEND (3.2+)
*
* DOS extended error information:
*
* Extended error code: Error class:
* 01 Invalid function number 01 Out of resource
* 02 File not found 02 Temporary situation
* 03 Path not found 03 Authorization error
* 04 Too many open files 04 Internal DOS error
* 05 Access denied 05 Hardware failure
* 06 Invalid handle 06 System software failure
* 07 Memory control blocks destroyed 07 Application program error
* 08 Insufficient memory 08 Not found
* 09 Invalid memory block address 09 Invalid format
* 0A Invalid environment 0A File locked
* 0B Invalid format 0B Media error
* 0C Invalid access code 0C Already exists
* 0D Invalid data 0D Unknown
* 0E Reserved
* 0F Invalid drive Suggested action:
* 10 Attempt to remove current directory 01 Retry
* 11 Not same device 02 Delay and retry
* 12 No more files 03 Get corrected user input
* 13 Write-protect error 04 Exit with cleanup
* 14 Unknown unit 05 Exit without cleanup
* 15 Drive not ready 06 Ignore error
* 16 Unknown command 07 Retry after user intervention
* 17 Data error (CRC)
* 18 Bad request structure length Error locus:
* 19 Seek error 01 Unknown
* 1A Unknown medium type 02 Block device error
* 1B Sector not found 03 Network error
* 1C Printer out of paper 04 Character device error
* 1D Write fault 05 Memory error
* 1E Read fault
* 1F General failure
* 20 Sharing violation
* 21 Lock violation
* 22 Invalid disk change
* 23 FCB unavailable
* 24 Sharing buffer overflow
* 25 Code page mismatch (4.0+)
* 26 Out of input (4.0+)
* 27 Insufficient disk space (4.0+)
* 32 Function not supported
* 41 Network access denied
* 50 File exists
* 51 Reserved
* 52 Cannot make directory entry
* 53 Fail on INT 24
*
* DOS table and structure reference (from https://sites.google.com/site/pcdosretro/dostables)
*
* Program Segment Prefix (100h bytes)
* 00 INT 20
* 02 End of allocation segment
* 04 Reserved
* 05 Far call to DOS
* 0A Saved INT 22 vector
* 0E Saved INT 23 vector
* 12 Saved INT 24 vector (1.1+)
* 16 Caller PSP segment (2.0+)
* 18 File table (2.0+)
* 2C Environment segment (2.0+)
* 2E Stack pointer after last DOS call (2.0+)
* 32 File table size (3.0+)
* 34 Pointer to file table (3.0+)
* 38 Pointer to next PSP (SHARE only) (3.0+)
* 3C Reserved
* 40 DOS version (4.0+)
* 42 Reserved
* 50 INT 21,RETF (2.0+)
* 53 Reserved
* 5C FCB 1
* 6C FCB 2
* 7C Unused
* 80 Command tail
*
* File Control Block (25h bytes)
* 00 Drive code (1=A)
* 01 Filename
* 09 Extension
* 0C Current block number
* 0E Record size
* 10 File size
* 14 Date
* 16 Time
* 18 Reserved
* 20 Current record number
* 21 Random record number
*
* Extended FCB (2Ch bytes)
* 00 FF (Extended FCB indicator)
* 01 Reserved
* 06 Attribute byte
* 07 Standard FCB
*
* Disk partition table entry (10h bytes)
* 00 Status (00=non-bootable,80=bootable)
* 01 Starting head
* 02 Starting cylinder and sector (INT 13 format)
* 04 Type (0=unknown,1=FAT12,4=FAT16,5=extended,6=BIGDOS)
* 05 Ending head
* 06 Ending cylinder and sector (INT 13 format)
* 08 Starting absolute sector
* 0C Number of sectors
* Note: There are 4 entries starting at offset 1BE
*
* Disk boot sector (200h bytes)
* 00 Jump to boot code
* 03 OEM name
* 0B Bytes per sector
* 0D Sectors per cluster
* 0E Number of reserved sectors
* 10 Number of FATs
* 11 Number of root directory entries
* 13 Total number of sectors
* 15 Media descriptor byte
* F0 1.44M (2 sides,18 sectors/track,80 tracks)
* 2.88M (2 sides,36 sectors/track,80 tracks)
* F8 fixed disk
* F9 720K (2 sides,9 sectors/track,80 tracks)
* 1.2M (2 sides,15 sectors/track,80 tracks)
* FC 180K (1 side,9 sectors/track,40 tracks)
* FD 360K (2 sides,9 sectors/track,40 tracks)
* FE 160K (1 side,8 sectors/track,40 tracks)
* FF 320K (2 sides,8 sectors/track,40 tracks)
* 16 Sectors per FAT
* 18 Sectors per track
* 1A Number of heads
* 1C Number of hidden sectors
* 20 32-bit number of sectors if word at 13=0 (3.31+)
* 24 Drive number (4.0+)
* 25 Reserved (4.0+)
* 26 Extended boot record ID (29) (4.0+)
* 27 Serial number (4.0+)
* 2B Volume label (4.0+)
* 36 8-byte file system name (4.0+)
* Note: Bytes 0B-23 are the BIOS parameter block
*
* Directory entry (20h bytes)
* 00 Filename
* 08 Extension
* 0B Attribute byte
* 01=Read-only
* 02=Hidden
* 04=System
* 08=Volume label (2.0+)
* 10=Directory (2.0+)
* 20=Archive (2.0+)
* 0C Reserved
* 16 Time
* Bits 0-4 Seconds/2 (0-29)
* 5-10 Minutes (0-59)
* 11-15 Hours (0-23)
* 18 Date
* Bits 0-4 Day (1-31)
* 5-8 Month (1-12)
* 9-15 Year-1980
* 1A Starting cluster number
* 1C File size
*
* Disk parameter block (20h bytes in 3.x, 21h bytes in 4.0+)
* 00 Drive code (0=A)
* 01 Unit code
* 02 Bytes per sector
* 04 Sectors per cluster-1
* 05 Cluster shift factor (2**n sectors per cluster)
* 06 First FAT sector
* 08 Number of FATs
* 09 Number of directory entries
* 0B First data sector
* 0D Maximum cluster number
* 0F Sectors per FAT
* 11 First directory sector
* 13 Pointer to device driver
* 17 Media descriptor byte
* 18 Access flag (00=accessed,FF=not accessed)
* 19 Pointer to next DPB
* 1D Last cluster allocated
* 1F Number of free clusters (-1 if unknown)
* Note: (3.x) The sectors per FAT field is one byte and all following
* fields are moved back one byte.
*
* System file table (35h bytes in 3.x, 3Bh bytes in 4.0+)
* 00 Open count
* 02 Open mode
* Bit 0-2 access mode
* 000=read
* 001=write
* 010=read/write
* 4-6 sharing mode
* 000=compatibility
* 001=deny read/write
* 010=deny write
* 011=deny read
* 100=deny none
* 13 critical error handling
* 0=execute INT 24
* 1=return error code
* 14 buffering
* 0=buffer writes
* 1=don't buffer writes
* 15 1=FCB SFT
* 04 Attribute byte
* 05 Device info
* Character devices: Block devices:
* Bit 0 1=console input Bit 0-5 drive code (0=A)
* 1 1=console output 6 0=file has been written
* 2 1=NUL device 7 0=block device
* 3 1=CLOCK device 12 1=no inherit
* 4 1=INT 29 output (CON) 14 1=date/time set
* 5 0=ASCII,1=binary 15 1=redirected file
* 6 0=EOF on input
* 7 1=character device
* 11 1=network spooler
* 12 1=no inherit
* 13 1=named pipe
* 15 1=redirected device
* 07 Pointer to device driver or disk parameter block
* 0B First cluster number
* 0D Time
* 0F Date
* 11 File size
* 15 File pointer
* 19 Current relative cluster number
* 1B 32-bit directory entry sector (4.0+)
* 1B Current absolute cluster number (3.x)
* 1D Directory entry sector (3.x)
* 1F Directory entry position in sector
* 20 Filename
* 28 Extension
* 2B Pointer to next SFT for the same file (SHARE only)
* 2F Machine number
* 31 PSP of owner
* 33 SHARE file table offset
* 35 Current absolute cluster number (4.0+)
* 37 Reserved (4.0+)
*
* SHARE file table
* 00 Entry flag (1=open,0=unused,-1=end of list)
* 01 Entry length
* 03 Filespec checksum
* 04 First lock table offset
* 06 Pointer to system file table
* 0A SHARE file number
* 0C Filespec
*
* SHARE lock table (10h bytes)
* 00 Offset to next lock table for file
* 02 Start of lock region
* 06 End of lock region
* 0A Pointer to system file table
* 0E PSP of owner
*
* Current directory structure (51h bytes in 3.x, 58h bytes in 4.0+)
* 00 Current directory
* 43 Drive type
* 1000=SUBSTed drive
* 2000=JOINed drive
* 4000=valid drive
* 8000=redirected drive
* 45 Pointer to disk parameter block
* 49 Cluster number of current directory (0=root)
* 4B Reserved
* 4F Length of root directory name starting at offset 0
* 51 Reserved (4.0+)
*
* Disk buffer header (10h bytes) (3.x)
* 00 Pointer to next buffer
* 04 Drive code (0=A,FF=unused)
* 05 Flags
* Bit 0 reserved
* 1 1=FAT sector
* 2 1=directory sector
* 3 1=data sector
* 4 reserved
* 5 1=buffer read
* 6 1=buffer written
* 7 reserved
* 06 Sector number
* 08 Number of FATs (if FAT) or 1
* 09 Sectors per FAT (if FAT) or 0
* 0A Pointer to DPB
* 0E Reserved
* 10 Buffered sector
*
* Disk buffer header (14h bytes) (4.0+)
* 00 Pointer to next buffer
* 02 Pointer to previous buffer
* 04 Drive code (0=A,FF=unused)
* 05 Flags
* Bit 0 reserved
* 1 1=FAT sector
* 2 1=directory sector
* 3 1=data sector
* 4 reserved
* 5 1=buffer read (4.0)
* 6 1=buffer written
* 7 reserved
* 06 Sector number
* 0A Number of FATs (if FAT) or 1
* 0B Sectors per FAT (if FAT) or 0
* 0D Pointer to DPB
* 11 Reserved
* 14 Buffered sector
*
* Disk buffer control block (4.0)
* 00 Pointer to buffer chain array
* 04 Number of chains
* 06 Pointer to sector lookahead buffers
* 0A Number of sector lookahead buffers
* 0C Unknown
*
* Disk buffer control block (5.0+)
* 00 Pointer to buffer chain
* 04 Number of modified buffers
* 06 Pointer to sector lookahead buffers
* 0A Number of sector lookahead buffers
* 0C HMA flag (1=buffers in HMA)
* 0D Pointer to HMA transfer buffer
*
* Disk buffer chain array entry (8 bytes) (4.0)
* 00 Reserved
* 02 Pointer to last accessed buffer
* 06 Number of modified buffers
* 07 Reserved
*
* Stacks block header (12h bytes)
* 00 Reserved
* 02 Number of stacks
* 04 Offset of stacks
* 06 Stack size
* 08 Pointer to stacks table (descriptors followed by stacks)
* 0C Offset of first stacks descriptor
* 0E Offset of last stacks descriptor
* 10 Offset of current stacks descriptor
*
* Stacks descriptor (8 bytes)
* 00 Flag (0=free,1=in use)
* 02 Save area for SS:SP
* 06 Offset of end of stack
*
* Device driver header (12h bytes)
* 00 Pointer to next device driver or -1
* 04 Attribute word
* Bit 0 1=console input
* 1 1=console output (character devices)
* 1=32-bit sectors supported (block devices) (3.31+)
* 2 1=NUL device
* 3 1=CLOCK device
* 4 1=INT 29 output (CON)
* 6 1=extended functions supported (13,17,18) (3.2+)
* 7 1=query IOCTL function supported (19) (5.0+)
* 11 1=open/close/removable media supported (3.0+)
* 13 1=output until busy supported (character devices) (3.0+)
* 1=media descriptor in FAT required (block devices)
* 14 1=IOCTL supported
* 15 0=block device
* 1=character device
* 06 Strategy address
* 08 Interrupt address
* 0A Device name or number of units
*
* Device driver request header (common fields)
* 00 Request header length
* 01 Unit number
* 02 Command code
* 00=Init 0B=Flush output buffers
* 01=Media check 0C=I/O control write
* 02=Build BPB 0D=Open (3.0+)
* 03=I/O control read 0E=Close (3.0+)
* 04=Read 0F=Removable media check (3.0+)
* 05=Non-destructive read 10=Output until busy (3.0+)
* 06=Input status 13=Generic I/O control (3.2+)
* 07=Flush input buffers 17=Get drive map (3.2+)
* 08=Write 18=Set drive map (3.2+)
* 09=Write with verify 19=Query I/O control (5.0+)
* 0A=Output status
* 03 Return status word
* Bit 0-7 if error
* 00=write-protect error 07=unknown medium
* 01=unknown unit 08=sector not found
* 02=drive not ready 09=printer out of paper
* 03=unknown command 0A=write fault
* 04=data error (CRC) 0B=read fault
* 05=bad request length 0C=general failure
* 06=seek error 0F=invalid disk change
* 8 1=done
* 9 1=busy
* 15 1=error
* 05 Reserved (8 bytes)
*
* Device driver request headers:
* Init
* 00 Common (length=17h in 3.x, 19h in 4.0+)
* 0D Number of units (set by driver)
* 0E End of available memory (5.0+)
* End of resident code (set by driver)
* 12 Pointer to string after DEVICE=
* BPB array pointer (set by driver)
* 16 Drive code of first unit (0=A)
* 17 Error message flag (1=display message) (4.0+)
*
* Media check
* 00 Common (length=13h)
* 0D Media descriptor byte
* 0E Status (set by driver: 1=unchanged,0=unknown,-1=changed)
* 0F Pointer to previous disk label (set by driver if disk changed)
*
* Build BPB
* 00 Common (length=16h)
* 0D Media descriptor byte
* 0E Pointer to sector buffer
* 12 Pointer to BPB (set by driver)
* Note: The sector buffer contains the first sector of the FAT if bit 13 in the
* device attribute word is zero otherwise it may be used as scratch space.
*
* IOCTL read, Read, Write, Write with verify, IOCTL write, Output until busy
* 00 Common (length=14h)
* 0D Unused
* 0E Pointer to data buffer
* 12 Byte count (set by driver to number of bytes transferred)
* Notes: 1) The IOCTL functions are called only if bit 14 in the device
* attribute word is set.
* 2) The output until busy function is called only if bit 13 in the
* device attribute word is set.
*
* Read, Write, Write with verify
* 00 Common (length=16h-1Eh)
* 0D Media descriptor byte
* 0E Pointer to data buffer
* 12 Sector count (set by driver to number of sectors transferred)
* 14 Starting sector number (-1=if 32-bit sectors)
* 16 Pointer to previous disk label (set by driver if error 0F)
* 1A 32-bit starting sector number
* Note: The 32-bit starting sector number is used only if bit 1 in the
* device attribute word is set.
*
* Non-destructive read
* 00 Common (length=0Eh)
* 0D Character (set by driver)
* Note: This function sets the busy bit (bit 9) in the request header
* if no character is ready.
*
* Input status, Output status
* 00 Common (length=0Dh)
* Note: These functions set the busy bit (bit 9) in the request header
* to indicate device status.
*
* Flush input buffers, Flush output buffers
* 00 Common (length=0Dh)
*
* Open, Close, Removable media check
* 00 Common (length=0Dh)
* Notes: 1) These functions are called only if bit 11 in the device
* attribute word is set.
* 2) The removable media check function sets bit 9 in the status word
* if the device is non-removable.
*
* Generic IOCTL, Query IOCTL
* 00 Common (length=17h)
* 0D Category code
* 0E Function code
* 0F Unused
* 13 Parameter buffer pointer
* Notes: 1) The Generic IOCTL function is called only if bit 6 in the device
* attribute word is set.
* 2) The Query IOCTL function is called only if bit 7 in the device
* attribute word is set.
*
* Get drive map, Set drive map
* 00 Common (length=0Dh)
* Notes: 1) These functions are called only if bit 6 in the device
* attribute word is set.
* 2) These functions set the unit field (byte 1) in the request
* header to the physical drive code.
*
* Clock device info (6 bytes)
* 00 Days since 1/1/80
* 02 Minutes
* 03 Hours
* 04 Hundredths
* 05 Seconds
*
* Memory Control Block (10h bytes)
* 00 Type ('M' or 'Z' if last)
* 01 PSP segment of owner (0=free,8=DOS)
* 03 Size (paragraphs)
* 05 Unused
* 08 Program name (4.0+)
*
* EXE file header
* 00 'MZ'
* 02 Size of last page
* 04 File size in 512-byte pages
* 06 Relocation table count
* 08 Header size (paragraphs)
* 0A Minimum allocation (paragraphs)
* 0C Maximum allocation (paragraphs)
* 0E Initial SS
* 10 Initial SP
* 12 Checksum
* 14 Initial IP
* 16 Initial CS
* 18 Offset of relocation table
* Table entry format:
* 0 offset of relocation
* 2 segment of relocation
* 1A Overlay number
*
* EXEPACK header
* 00 Actual IP
* 02 Actual CS
* 04 0 (set to PSP+10h by unpack code)
* 06 Unpack code and data size (including relocation table)
* 08 Actual SP
* 0A Actual SS
* 0C Actual code and data size
*
* Note: If an EXE file is packed then CS:IP-2 points to 'RB' and CS:0
* points to the EXEPACK header, this is followed by the unpack code
* and a relocation table containing a word count and relocation
* entries for 16 segments.
*/
if (NODE) module.exports = Interrupts;