SUBTTL	*PARAM*	CONSOLE DATA SWITCH ASSIGNMENTS, SEPT 18,1979

DEFINE	S,<; *********************************************************************>

; **********************************************************************
;*DATA SWITCHES (READ FROM CONSOLE IN EXEC MODE OR TYPED IN IN USER MODE)
;*LEFT HALF SWITCHES ARE PRE-ASSIGNED FOR SUBROUTINE PACKAGE USE
;*AND CONTROL LOOPING, PRINTING (TTY OR OTHER DEVICE) AND MISC. FUNCTIONS
; **********************************************************************

ABORT==	400000			;ABORT PROGRAM ON PASS COMPLETION
RSTART==200000			;RESTART TEST, PRINT TOTALS
TOTALS==100000			;PRINT TOTALS, CONTINUE

NOPNT==	040000			;INHIBIT ALL PRINT/TYPE OUT (EXCEPT FORCED)
PNTLPT==020000			;PRINT ALL DATA ON LPT (LOGICAL DEVICE, USER MODE)
DING==	010000			;RING BELL ON ERROR

LOOPER==004000			;ENTER EXERCISE/CHECK LOOP ON ERROR
ERSTOP==002000			;HALT ON TEST ERROR
PALERS==001000			;PRINT ALL ERRORS

RELIAB==000400			;RELIABILITY MODE
TXTINH==000200			;INHIBIT ERROR TEXT
INHPAG==000100			;INHIBIT PAGING

MODDVC==000040			;MODIFY DEVICE CODE
INHCSH==000020			;INHIBIT CACHE
OPRSEL==000010			;OPERATOR SELECTION

CHAIN==	000004			;CHAIN CONTROL SWITCH

KAHZ50==000002			;KA10 50 HERTZ POWER

				;SWITCH 17 RESERVED !!!
SUBTTL	*PARAM* PROGRAM/SUBROUTINE PARAMETERS, SEPT 18,1979

; **********************************************************************
;*SPECIAL SUBPROGRAM LINKAGES
; **********************************************************************

FSELNK=	27772	;FILE SELECT LINK
FRDLNK=	27773	;FILE READ LINK
LDLNK=	27774	;LOAD LINKAGE ADDRESS
DDTLNK=	27775	;DDT LINKAGE ADDRESS
MODLNK=	27776	;OPERATIONAL MODE CHECK LINKAGE ADDRESS
SUBLNK=	27777	;SUBROUTINE LINKAGE ADDRESS

; **********************************************************************
;*SPECIAL SUBROUTINE FATAL HALTS
;*USED TO REPORT ERRORS THAT CAUSE THE SUBROUTINES TO BE UNUSABLE
; **********************************************************************

;ADDRESS   TAG	REASON
;---------------------

; 1010 	NOEXEC	;PROGRAM NOT CODED FOR EXEC MODE OPERATION
; 1011  PLERR	;FATAL PUSH LIST POINTER ERROR
; 1012  PLERR1	;INITIAL PUSH LIST POINTER ERROR
; 1013  MUOERR	;MUUO WITH LUUO HANDLER WIPED OUT
; 1014  DTEBER	;DTE20 INTERRUPT WITHOUT DOORBELL
; 1015  DTECER	;DTE20 CLOCK INTERRUPT WITHOUT FLAG SET
; 1016  CPIERR	;CPU INITIALIZATION ERROR
; 1017  EOPERR	;END OF PROGRAM ERROR
; 1020  LUOERR	;INTERRUPT WITH LUUO HANDLER WIPED OUT

; **********************************************************************
; **********************************************************************
;OPERATOR DEFINITIONS (NON-UUO'S)
; **********************************************************************

OPDEF	GO	[PUSHJ	P,]	;SUBROUTINE CALL
OPDEF	RTN	[POPJ	P,]	;SUBROUTINE RETURN
OPDEF	PUT	[PUSH	P,]	;PUT DATA ON PUSH LIST
OPDEF	GET	[POP	P,]	;GET DATA FROM PUSH LIST
OPDEF	PJRST	[JRST	]	;JRST TO ROUTINE THAT RTN'S
OPDEF	HALT	[JRST	4,]	;DEFINITION FOR DDT
OPDEF	JRSTF	[JRST	2,]	;DEFINITION FOR DDT
OPDEF	JEN	[JRST	12,]	;DEFINITION FOR DDT

; **********************************************************************
;SUBROUTINE INITIALIZATION CALL
; **********************************************************************

OPDEF	PGMINT	[JSP	0,SBINIT]	;SUBROUTINE INITIALIZATION

; **********************************************************************
;HALTING UUO'S (A MORE GRACEFUL HALT THAN SIMPLY USING THE HALT INSTRUCTION).
; **********************************************************************

OPDEF	FATAL	[37B8!15B12!4]	;FATAL PROGRAMMING HALT
OPDEF	ERRHLT	[37B8!14B12!4]	;PROGRAM ERROR HALT

; **********************************************************************
;TERMINAL INPUT UUO'S
;ALWAYS COME FROM THE CONSOLE TERMINAL IN EXEC MODE OR THE
;CONTROLLING TERMINAL (REAL TERMINAL OR PTY) IN USER MODE.
; **********************************************************************

OPDEF	TTICHR 	[37B8!0B12!3]	;TTY, INPUT ANY CHARACTER
OPDEF	TTIYES	[37B8!1B12!3]	;TTY, NORMAL RETURN Y
OPDEF	TTINO	[37B8!2B12!3]	;TTY, NORMAL RETURN N
OPDEF	TTIOCT	[37B8!3B12!3]	;TTY, INPUT OCTAL WORD
OPDEF	TTIDEC	[37B8!4B12!3]	;TTY, INPUT DECIMAL WORD
OPDEF	TTICNV	[37B8!5B12!3]	;TTY, INPUT CONVERTABLE WORD
OPDEF	TTLOOK	[37B8!6B12!3]	;TTY, KEYBOARD CHECK
OPDEF	TTALTM	[37B8!7B12!3]	;TTY, ALT-MODE CHECK
OPDEF	TTSIXB	[37B8!10B12!3]	;TTY, INPUT SIXBIT WORD
OPDEF	TTYINP	[37B8!11B12!3]	;TTY, IMAGE MODE INPUT
OPDEF	TTICLR	[37B8!12B12!3]	;TTY, CLEAR INPUT
;TERMINAL OUTPUT UUO'S.

OPDEF	PNTA	[37B8!0B12!0]	;PRINT ASCII WORD
OPDEF	PNTAF	[37B8!0B12!1]	;PRINT ASCII WORD FORCED
OPDEF	PNTAL	[37B8!17B12!0]	;PRINT ASCIZ LINE
OPDEF	PNTALF	[37B8!17B12!1]	;PRINT ASCIZ LINE FORCED
OPDEF	PSIXL	[37B8!14B12!3]	;PRINT SIXBIT'Z LINE
OPDEF	PSIXLF	[37B8!15B12!3]	;PRINT SIXBIT'Z LINE FORCED
OPDEF	PNTMSG	[37B8!0B12!0]	;PRINT MESSAGE IMMEDIATE
OPDEF	PNTMSF	[37B8!1B12!0]	;PRINT MESSAGE IMMEDIATE FORCED
OPDEF	PSIXM	[37B8!2B12!0]	;PRINT SIXBIT'Z MSG IMMEDIATE
OPDEF	PSIXMF	[37B8!4B12!0]	;PRINT SIXBIT'Z MSG IMM FORCED
OPDEF	PNTCI	[37B8!0B12!0]	;PRINT CHARACTER IMMEDIATE
OPDEF	PNTCIF	[37B8!1B12!0]	;PRINT CHARACTER IMMEDIATE FORCED
OPDEF	PNTCHR	[37B8!12B12!0]	;PRINT CHARACTER
OPDEF	PNTCHF	[37B8!12B12!1]	;PRINT CHARACTER FORCED
OPDEF	PNT1	[37B8!1B12!0]	;PRINT ONE OCTAL DIGIT
OPDEF	PNT1F	[37B8!1B12!1]	;PRINT 1 OCTAL DIGIT FORCED
OPDEF	PNT2	[37B8!2B12!0]	;PRINT TWO OCTAL DIGITS
OPDEF	PNT2F	[37B8!2B12!1]	;PRINT 2 OCTAL DIGITS FORCED
OPDEF	PNT3	[37B8!3B12!0]	;PRINT THREE OCTAL DIGITS
OPDEF	PNT3F	[37B8!3B12!1]	;PRINT THREE OCTAL DIGITS FORCED
OPDEF	PNT4	[37B8!4B12!0]	;PRINT FOUR OCTAL DIGITS
OPDEF	PNT4F	[37B8!4B12!1]	;PRINT FOUR OCTAL DIGITS FORCED
OPDEF	PNT5	[37B8!5B12!0]	;PRINT FIVE OCTAL DIGITS
OPDEF	PNT5F	[37B8!5B12!1]	;PRINT FIVE OCTAL DIGITS FORCED
OPDEF	PNT6	[37B8!6B12!0]	;PRINT SIX OCTAL DIGITS
OPDEF	PNT6F	[37B8!6B12!1]	;PRINT SIX OCTAL DIGITS FORCED
OPDEF	PNT7	[37B8!7B12!0]	;PRINT 7 OCTAL DIGITS
OPDEF	PNT7F	[37B8!7B12!1]	;PRINT 7 OCTAL DIGITS FORCED
OPDEF	PNT11	[37B8!11B12!0]	;PRINT 11 OCTAL DIGITS
OPDEF	PNT11F	[37B8!11B12!1]	;PRINT 11 OCTAL DIGITS FORCED.
OPDEF	PNTADR	[37B8!10B12!0]	;PRINT PHYSICAL ADDRESS
OPDEF	PNTADF	[37B8!10B12!1]	;PRINT PHYSICAL ADDRESS FORCED
OPDEF	PNTOCT  [37B8!14B12!0]	;PRINT FULL WORD OCTAL
OPDEF	PNTOTF	[37B8!14B12!1]	;PRINT FULL WORD OCTAL FORCED
OPDEF	PNTHW	[37B8!13B12!0]	;PRINT OCTAL HALF WORDS, 6 SP 6
OPDEF	PNTHWF	[37B8!13B12!1]	;PRINT OCTAL HALF WORDS, 6 SP 6 FORCED
OPDEF	PNTOCS	[37B8!16B12!3]	;PRINT OCTAL, SUPPRESS LEADING 0'S
OPDEF	PNTOCF	[37B8!17B12!3]	;PRINT OCTAL, SUPPRESS LEADING 0'S FORCED
OPDEF	PNTDEC	[37B8!15B12!0]	;PRINT DECIMAL, SUPRESS LEADING 0'S
OPDEF	PNTDCF	[37B8!15B12!1]	;PRINT DECIMAL, SUPRESS LEADING 0'S FORCED
OPDEF	PNTDS	[37B8!16B12!0]	;PRINT DECIMAL, SPACES FOR LD 0'S
OPDEF	PNTDSF	[37B8!16B12!1]	;PRINT DECIMAL, SPACES FOR LD 0'S FORCED
OPDEF	PNTNM	[37B8!4B12!2]	;PRINT PROGRAM NAME
OPDEF	PNTSIX	[37B8!0B12!2]	;PRINT SIXBIT WORD
OPDEF	PNTSXF	[37B8!1B12!2]	;PRINT SIXBIT WORD FORCED
OPDEF	DROPDV	[37B8!5B12!2]	;CLOSE LOGICAL FILE, USER MODE
OPDEF	PNTCW	[37B8!2B12!2]	;PRINT DF10 CONTROL WORD
OPDEF	PNTCWF	[37B8!3B12!2]	;PRINT DF10 CONTROL WORD FORCED
OPDEF	PCRL	[37B8!0B12!CRLF] ;PRINT CARRIAGE RETURN/LINE FEED
OPDEF	PCRLF	[37B8!1B12!CRLF] ;PRINT CARRIAGE RETURN/LINE FEED FORCED
OPDEF	PSP	[37B8!0B12!40]	;PRINT SPACE
OPDEF	PSPF	[37B8!1B12!40]	;PRINT SPACE FORCED
OPDEF	PCRL2	[37B8!0B12!CRLF2] ;PRINT CARRIAGE RETURN/LINE FEED (TWICE)
OPDEF	PCRL2F	[37B8!1B12!CRLF2] ;PRINT CARRIAGE RETURN/LINE FEED (TWICE) FORCED
OPDEF	PBELL	[37B8!1B12!7]	;PRINT TTY BELL

OPDEF	PFORCE	[37B8!1B12!26]	;PRINT FORCE, CONTROL O OVERRIDE

DEFINE	PMSG	(ARG),<
	PSIXM	[SIXBIT\ARG'_\]>

DEFINE	PMSGF	(ARG),<
	PSIXMF	[SIXBIT\ARG'_\]>

;SIXBTZ -- MACRO TO GENERATE SIXBIT DATA FOR PRINTING
;	CONSERVES CORE OVER ASCIZ

DEFINE	SIXBTZ	(ARG),<	[SIXBIT\ARG'_\]>

;CONSOLE SWITCH INPUT UUO.
;READS CONSOLE SWITCHES IF IN EXEC MODE OR ASKS FOR THEM IF
; USER MODE.

OPDEF	SWITCH	[37B8!10B12!2]	;INPUT CONSOLE SWITCHES

;CLOCK INITIALIZATION UUO - TO SET DESIRED CLOCK OPERATION
;EITHER IGNORE CLOCK, ONLY LET IT TICK OR CAUSE INTERRUPT TO OCCUR.

OPDEF	CLOKOP	[37B8!13B12!4]	;CLOCK OPERATION UUO - PDP-11 CLOCK
OPDEF	MTROP	[37B8!4B12!4]	;CLOCK OPERATION UUO - DK20 METER

;KL10 ONLY CACHE OPERATION UUO'S

OPDEF	CINVAL	[37B8!1B12!4]	;CACHE INVALIDATE
OPDEF	CFLUSH	[37B8!2B12!4]	;CACHE FLUSH
OPDEF	CWRTBI	[37B8!3B12!4]	;CACHE WRITE-BACK & INVALIDATE
;END OF PASS/PROGRAM UUOS

;PERFORMS THE END OF PASS FUNCTIONS. INCREMENT PASS COUNT,
;DECREMENT ITERATION COUNT, CHECK IF FINISHED WITH THIS PROGRAM ETC.

OPDEF	ENDUUO	[37B8!12B12!4]	;UUO TO DISPLAY LIGHTS
OPDEF	EOPUUO	[37B8!16B12!4]	;END OF PROGRAM UUO

;MEMORY MANAGEMENT UUO'S
;UUO'S TO PERFORM VARIOUS MEMORY FUNCTIONS. MAPPING, ZEROING, PAGING,
;ADDRESS CONVERSION, ETC...

OPDEF	MAPMEM	[37B8!0B12!4]	;MAP MEMORY
OPDEF	MEMZRO	[37B8!12B12!2]	;ZERO MEMORY
OPDEF	MEMSEG	[37B8!11B12!2]	;SETUP MEMORY SEGMENT
OPDEF	MAPADR	[37B8!13B12!2]	;VIRTUAL TO PHYSICAL ADR CONVERT
OPDEF	MAPCNK	[37B8!15B12!2]	;MAP MEMORY CHUNK
OPDEF	MAPSET	[37B8!14B12!2]	;SET KI10 EXEC PAGE MAP
OPDEF	MAPPNT	[37B8!17B12!2]	;PRINT MEMORY MAP

;DEVICE CODE MODIFICATION UUO
;ALLOWS THE MODIFICATION OF IOT'S TO ONE DEVICE TO BE CHANGED TO
;IOT'S TO A DIFFERENT DEVICE CODE.

OPDEF	MODPCU	[37B8!7B12!2]	;MODIFY PERHIPERAL CODE, USER
OPDEF	MODPCP	[37B8!6B12!2]	;MODIFY PERHIPERAL CODE, PROGRAM

	IFNDEF	MODDVL,<MODDVL==BEGIN>
	IFNDEF	MODDVU,<MODDVU==BEGIN>

;"DIAMON" FILE SELECTION AND READ UUOS

OPDEF	FSELECT	[37B8!5B12!4]	;FILE SELECTION
OPDEF	FREAD	[37B8!6B12!4]	;FILE READ - ASCII DATA
OPDEF	FRD36	[37B8!7B12!4]	;FILE READ - 36 BIT DATA
OPDEF	FRD8	[37B8!10B12!4]	;FILE READ - 8 BIT DATA

;KI10 ONLY UUO FOR PRINTING MARGIN VALUES

OPDEF	PNTMGN	[37B8!16B12!2]	;PRINT MARGIN VALUE

	XLIST
IFNDEF	KLOLD,<LIST
SUBTTL	ERROR HANDLING UUO DEFINITIONS, SEPT 18,1979

; **********************************************************************
;ERROR HANDLER PARAMETERS
; **********************************************************************

OPDEF	ERUUO	[36B8]		;ERROR CALL UUO
OPDEF	ERLOOP	[35B8]		;ERROR LOOP, CHECKS PC,REPT,REPT1,ERROR
OPDEF	ERLP1	[35B8!1B12]	;ERROR LOOP IF PC'S MATCH
OPDEF	ERLP2	[35B8!2B12]	;ERROR LOOP IF ANY ERROR
OPDEF	REPTUO	[34B8]		;REPEAT LOOP UUO

;THE ERROR HANDLER MACROS

;A MACRO TO REPORT AN ERROR AND LOOP

	DEFINE	ERROR	(ADR,FORMAT,CORECT,ACTUAL,F,D,ERR)<
							SALL
	ERUUO	FORMAT,[T,,[SIXBIT\F'_\]
		   CORECT,,ACTUAL
		   [SIXBIT\D'_\],,ERR]
							XALL
	ERLOOP	ADR		;IF ERROR, LOOP TO ADR
>

;A MACRO TO REPORT AN ERROR AND NOT LOOP

	DEFINE	ERROR1	(FORMAT,CORECT,ACTUAL,F,D,ERR)<
							SALL
	ERUUO	FORMAT,[T,,[SIXBIT\F'_\]
		   CORECT,,ACTUAL
		   [SIXBIT\D'_\],,ERR]
							XALL>

>;END OF KLOLD CONDITIONAL

	XLIST
IFDEF	$PAPER,<LIST>
SUBTTL	STANDARD PROGRAM ASSIGNMENTS

; **********************************************************************
;ACCUMULATORS
; **********************************************************************

P=	17			;PUSHDOWN POINTER AC (IF PUSH LIST USED)
REPT==	15			;ERROR HANDLER REPEAT AC
REPT1==	16			; "

; **********************************************************************
;PDP-10 STANDARD PC CONTROL FLAGS (SAVED ON PUSHJ, JSR, ETC..)
; **********************************************************************

AROV==	400000			;ARITHMETIC OVERFLOW
CRY0==	200000			;CARRY 0
CRY1==	100000			;CARRY 1
FOV==	40000			;FLOATING POINT OVERFLOW
BIS==	20000			;BYTE INTERRUPT
USERF==	10000			;USER MODE
EXIOT==	4000			;USER PRIV I/O
FXU==	100			;FLOATING POINT UNDERFLOW
DCK==	40			;DIVIDE CHECK

; **********************************************************************
;PDP-10 STANDARD ADDRESS ASSIGNMENTS
; **********************************************************************

LUUO==	40			;UUO STORAGE, UUO 1-37
LUUOI==	41			;UUO SERVICE INSTRUCTION

; **********************************************************************
;JOB DATA AREA EXTERNALS (OLD DEFINITIONS)
; **********************************************************************

JOBUUO==40
JOB41==	41
JOBREL==44
JOBDDT==74
JOBSYM==116
JOBUSY==117
JOBSA==	120
JOBFF==	121
JOBREN==124
JOBAPR==125
JOBCNI==126
JOBTPC==127
JOBOPC==130
JOBVER==137
; **********************************************************************
;JOB DATA AREA EXTERNALS (NEW DEFINITIONS)
; **********************************************************************

.JBUUO==40
.JB41==	41
.JBREL==44
.JBDDT==74
.JBSYM==116
.JBUSY==117
.JBSA==	120
.JBFF==	121
.JBREN==124
.JBAPR==125
.JBCNI==126
.JBTPC==127
.JBOPC==130
.JBVER==137

; **********************************************************************
;USER MODE APR ASSIGNMENTS (FOR "APRENB" CALL)
; **********************************************************************

PDLOVU==200000			;PUSHDOWN LIST OVERFLOW
MPVU==	20000			;MEMORY PROTECTION VIOLATION
NXMU==	10000			;NON-X-MEMORY
PARU==	4000			;PARITY ERROR
CLKU==	1000			;CLOCK
FOVU==	100			;FLOATING OVERFLOW
AROVU==	10			;ARITHMETIC OVERFLOW

; **********************************************************************
;USER MODE PRINT OUTPUT CHANNEL ASSIGNMENTS (FOR SUBROUTINE PACKAGE)
;THE USER SHOULD BE CAUTIONED NOT TO USE THESE CHANNELS WHEN
;USING THE SUBROUTINE PACKAGE AND CODING USER MODE PROGRAMS.
; **********************************************************************

$DEVCH==17			;LOGICAL DEVICE CHANNEL
$DVCH1==16			;LOGICAL DEV UPDATE INPUT CHANNEL

; **********************************************************************
;PDP-10 SPECIAL COMPATABILITY ASSIGNMENTS
; **********************************************************************

PAG==	010		;PAGING I/O DEVICE CODE, KI/KL

CCA==	014		;CACHE I/O DEVICE CODE, KL10
; **********************************************************************
;PDP-10 STANDARD APR CONO ASSIGNMENTS
; **********************************************************************

IOCLR==	200000			;CLEAR ALL I/O DEVICES
CLKDIS==4000			;DISABLE CLOCK INTERRUPTS
CLKENB==2000			;ENABLE CLOCK INTERRUPTS
CLKCLR==1000			;CLEAR CLOCK FLAG

; **********************************************************************
;PDP-10 STANDARD APR CONI ASSIGNMENTS, RIGHT HALF
; **********************************************************************

CLKENB==2000			;CLOCK INTERRUPT ENABLED
CLK==	1000			;CLOCK FLAG
ANXM==	10000			;KA10, NON-X-MEMORY
INXM==	100			;KI10

; **********************************************************************
;PDP-10 STANDARD PI CONO ASSIGNMENTS
; **********************************************************************

PWFCLR==400000			;CLEAR POWER FAIL FLAG
PARCLR==200000			;CLEAR PARITY ERROR FLAG
PARDIS==100000			;DISABLE PARITY INTERRUPTS
PARENB==40000			;ENABLE PARITY INTERRUPTS
PICLR==	10000			;CLEAR PI SYSTEM
REQSET==4000			;SET PROGRAM PI REQUEST
CHNON==	2000			;TURN ON CHANNEL
CHNOFF==1000			;TURN OFF CHANNEL
PIOFF==	400			;TURN OFF PI SYSTEM
PION==	200			;TURN ON PI SYSTEM

; **********************************************************************
;PDP-10 STANDARD PI CONI ASSIGNMENTS
; **********************************************************************

PION==	200			;PI SYSTEM ON

; **********************************************************************
;PDP-10 STANDARD PI CHANNEL ASSIGNMENTS
; **********************************************************************

PICHN1==100			;PI CHANNEL 1
PICHN2==40			;PI CHANNEL 2
PICHN3==20			;PI CHANNEL 3
PICHN4==10			;PI CHANNEL 4
PICHN5==4			;PI CHANNEL 5
PICHN6==2			;PI CHANNEL 6
PICHN7==1			;PI CHANNEL 7
PICHNA==177			;ALL PI CHANNELS, 1 THRU 7
	XLIST
	IFDEF	KA10,<
IFDEF	$PAPER,<LIST>
; **********************************************************************
;KA10 APR CHANNEL ASSIGNMENTS
; **********************************************************************

AAPRC1==1			;APR INTERRUPT CHANNEL

; **********************************************************************
;KA10 APR CONO ASSIGNMENTS
; **********************************************************************

APDCLR==400000			;CLEAR PUSHDOWN OVERFLOW
AABCLR==40000			;CLEAR ADDRESS BREAK
AMPCLR==20000			;CLEAR MEMORY PROTECTION
ANXCLR==10000			;CLEAR NON-X-MEMORY
AFODIS==400			;DISABLE FLOATING POINT OVERFLOW
AFOENB==200			;ENABLE FLOATING POINT OVERFLOW
AFOCLR==100			;CLEAR FLOATING POINT OVERFLOW
AOVDIS==40			;DISABLE OVERFLOW
AOVENB==20			;ENABLE OVERFLOW
AOVCLR==10			;CLEAR OVERFLOW

; **********************************************************************
;KA10 APR CONI ASSIGNMENTS
; **********************************************************************

APDLOV==200000			;PUSHDOWN OVERFLOW
AUSRIO==100000			;USER I/O
AADRBK==40000			;ADDRESS BREAK
AMPV==	20000			;MEMORY PROTECTION VIOLATION
ANXM==	10000			;NON-EXISTENT MEMORY
AFOENB==200			;FLT PT INTERRUPT ENABLED
AFOV==	100			;FLOATING POINT OVERFLOW
ATRPOS==40			;TRAPS OFFSET
AOVENB==20			;OVERFLOW INTERRUPT ENABLED
AOVFLO==10			;ARITHMETIC OVERFLOW

; **********************************************************************
;KA10 PI CONI ASSIGNMENTS
; **********************************************************************

APWRFL==400000			;POWER FAILURE
APARER==200000			;PARITY ERROR
APAREN==100000			;PARITY INTERRUPT ENABLED

>				;END CONDITIONAL ON KA10
	XLIST
	IFDEF	KI10,<
IFDEF	$PAPER,<LIST>
; **********************************************************************
;KI10 PC CONTROL FLAGS
; **********************************************************************

LIP==	2000			;LAST INSTRUCTION PUBLIC
TN0==	400			;TN=00, NO TRAP ;TN=01, ARITH TRAP
TN1==	200			;TN=10, PDL OV  ;TN=11, TRAP 3

; **********************************************************************
;KI10 SPECIAL EXEC MODE FLAGS
; **********************************************************************

UOLIP==	400000			;UUO OLD L.I.P.
UOUSR==	4000			;UUO OLD USER

; **********************************************************************
;KI10 APR CHANNEL ASSIGNMENTS
; **********************************************************************

IAPRC1==1			;APR CLOCK CHANNEL
IAPRE1==10			;APR ERROR CHANNEL

; **********************************************************************
;KI10 APR CONO ASSIGNMENTS
; **********************************************************************

ITMSET==400000			;SET TIME OUT TIMER
ITMDIS==100000			;DISABLE TIME OUT
ITMENB==40000			;ENABLE TIME OUT
IASRTC==20000			;CLEAR AUTO RESTART
IASRTS==10000			;SET AUTO RESTART
IIOPFC==200			;CLEAR I/O PAGE FAIL
INXCLR==100			;CLEAR NON-X-MEM

; **********************************************************************
;KI10 APR CONI ASSIGNMENTS, RIGHT HALF
; **********************************************************************

ITMOUT==400000			;TIMER TIMED OUT
IPARER==200000			;PARITY ERROR
IPAREN==100000			;PARITY ENABLED
ITMOEN==40000			;TIME OUT ENABLED
IPWRFL==20000			;POWER FAIL
IASRTE==10000			;AUTO RESTART ENABLED
IIOPFL==200			;I/O PAGE FAIL
INXM==	100			;NON-X-MEMORY
; **********************************************************************
;KI10 APR CONI ASSIGMENTS, LEFT HALF
; **********************************************************************

IMLAPD==200000			;MEMORY OVERLAP DISABLED
IFMMAN==100000			;FAST MEMORY MANUAL
IMIPGD==40000			;MI PROGRAM DISABLE
ICNSLR==20000			;CONSOLE READ ONLY
ICNSLL==10000			;CONSOLE LOCKED
IP50HZ==4000			;50 HZ POWER
IMGINM==2000			;MANUAL MARGINS
IMAINT==1000			;MAINTENANCE MODE
IPWRLO==400			;POWER LOW
IMGNLO==200			;MARGIN COMPARATOR LOW
SENSE1==40			;SENSE SWITCHES		1
SENSE2==20			;			2
SENSE3==10			;			3
SENSE4==4			;			4
SENSE5==2			;			5
SENSE6==1			;			6

; **********************************************************************
;KI10 APR DATAO ASSIGNMENTS
; **********************************************************************

IEVNPR==20000			;WRITE EVEN PARITY
ISPDOF==10000			;SPEED MARGINS OFF
ISPDON==4000			;SPEED MARGINS ON
IMGNOF==2000			;MARGINS OFF - LH
IMGNON==1000			;MARGINS ON - LH

; **********************************************************************
;KI10 PI CONO ASSIGNMENTS
; **********************************************************************

IRQCLR==20000			;CLEAR PROGRAM PI REQUEST
; **********************************************************************
;KI10 PI CONI ASSIGNMENTS
; **********************************************************************

IINSTF==400000			;ADDRESS CONDITIONS, INST FETCH
IDATAF==200000			;	    	     DATA FETCH
IWRITE==100000			;		     WRITE
IADSTP==40000			;ADDRESS STOP
IADBRK==20000			;ADDRESS BREAK
IADEXC==10000			;ADDRESS SWITCHES EXEC
IADUSR==4000			;  "	  "       USER
IPRSTP==2000			;PARITY STOP
INXSTP==1000			;NON-X-MEM STOP

; **********************************************************************
;KI10 PAG CONI ASSIGNMENTS
; **********************************************************************

EXCMEM==400			;EXEC MEMORY SPACE
AMCLRB==40			;ASSOCIATIVE MEMORY CLEAR BIT

; **********************************************************************
;KI10 PAG DATAO ASSIGNMENTS, LEFT HALF
; **********************************************************************

LDUSRB==400000			;LOAD USER BASE REGISTER
SMLUSR==40000			;SMALL USER, 32K OR UNDER
USRCMP==20000			;USER ADR COMPARE ENABLE

; **********************************************************************
;KI10 PAG DATAO ASSIGNMENTS, RIGHT HALF
; **********************************************************************

LDEXCB==400000			;LOAD EXEC BASE REGISTER
TRPENB==20000			;ENABLE TRAPS

; **********************************************************************
;KI10 PAG DATAI ASSIGNMENTS
; **********************************************************************

SMLUSR==40000			;SMALL USER
USRCMP==20000			;USER ADR COMPARE ENABLED
TRPENB==20000			;RH, TRAPS ENABLED

; **********************************************************************
;KI10 PTR DATAO ASSIGNMENTS
; **********************************************************************

				;ADDRESS CONDITIONS, ADDRESS BREAK ;AS ABOVE, PI CONI
				;ADDRESS SWITCHES, 14-35
; **********************************************************************
;KI10 EXEC PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

PGFTRP==420			;PAGE FAULT TRAP
AROVTP==421			;ARITHMETIC TRAP
PDOVTP==422			;PUSHDOWN OVERFLOW TRAP
TRP3TP==423			;TRAP 3 TRAP

; **********************************************************************
;KI10 USER PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

PGFTRP==420			;PAGE FAULT TRAP
AROVTP==421			;ARITHMETIC TRAP
PDOVTP==422			;PUSHDOWN OVERFLOW TRAP
TRP3TP==423			;TRAP 3 TRAP

MUUO==	424			;MUUO STORAGE
MUUOPC==425			;C(PC) OF MUUO STORAGE

EXCPFW==426			;EXEC PAGE FAIL WORD
USRPFW==427			;USER PAGE FAIL WORD

KNTRP==	430			;KERNAL	 	NO TRAP - NEW PC'S-
KTRP==	431			;"	 	TRAP
SNTRP==	432			;SUPERVISOR	NO TRAP
STRP==	433			;"		TRAP
CNTRP==	434			;CONCEAL 	NO TRAP
CTRP==	435			;"		TRAP
PNTRP==	436			;PUBLIC		NO TRAP
PTRP==	437			;"		TRAP

>			;END CONDITIONAL ON KI10
	XLIST
	IFDEF	KL10,<
	IFNDEF	KL10P0,<
IFDEF	$PAPER,<LIST>
;KL10 CONO APR 000 ASSIGMENTS
; **********************************************************************

LIOCLR==200000			;CLEAR ALL I/O DEVICES
LFLGEN==100000			;ENABLE SELECTED FLAG
LFLGDS==40000			;DISABLE SELECTED FLAG
LFLGCL==20000			;CLEAR SELECTED FLAG
LFLGST==10000			;SET SELECTED FLAG
LSBUSE==4000			;SBUS ERROR FLAG
LNXMER==2000			;NON-EXISTENT MEMORY FLAG
LPARER==1000			;PARITY ERROR FLAG
LIOPFE==400			;I/O PAGE FAIL FLAG
LPWRFL==100			;POWER FAIL FLAG
LCASWD==20			;CACHE SWEEP DONE FLAG
LAPRP7==7			;APR PI CHANNEL 7
LAPRP6==6			;APR PI CHANNEL 6
LAPRP5==5			;APR PI CHANNEL 5
LAPRP4==4			;APR PI CHANNEL 4
LAPRP3==3			;APR PI CHANNEL 3
LAPRP2==2			;APR PI CHANNEL 2
LAPRP1==1			;APR PI CHANNEL 1
LESBER==104000			;ENABLE SBUS ERRORS
LDSBER==044000			;DISABLE SBUS ERRORS
LCSBER==024000			;CLR SBUS ERRORS
LSSBER==014000			;SET SBUS ERROR
LENXER==102000			;ENABLE NON-EXISTENT MEMORY
LDNXER==042000			;DISABLE NON-EXISTENT MEORY
LCNXER==022000			;CLR NON-EXISTENT MEMORY
LSNXER==012000			;SET NON-EXISTENT MEMORY
LEPAER==101000			;ENABLE PARITY ERRORS
LDPAER==041000			;DISABLE PARITY ERRORS
LCPAER==021000			;CLR PARITY ERROR
LSPAER==011000			;SET PARITY ERROR
LEIOPF==100400			;ENABLE I/O PAGE FAILS
LDIOPF==040400			;DISABLE I/O PAGE FAILS
LCIOPF==020400			;CLR I/O PAGE FAIL
LSIOPF==010400			;SET I/O PAGE FAIL
LEPWRF==100100			;ENABLE POWER FAIL
LDPWRF==040100			;DISABLE POWER FAIL
LCPWRF==020100			;CLR POWER FAIL
LSPWRF==010100			;SET POWER FAIL
LECASD==100020			;ENABLE CACHE SWEEP DONE
LDCASD==040020			;DISABLE CACHE SWEEP DONE
LCCASD==020020			;CLR CACHE SWEEP DONE
LSCASD==010020			;SET CACHE SWEEP DONE
LAPRAL==127520			;CLR ALL ERROR FLAGS & ENABLE
; **********************************************************************
;KL10 CONI APR 000 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LSBSEN==4000			;SBUS ERRORS ENABLED
LNXMEN==2000			;NON-EXISTENT MEMORY ERRORS ENABLED
LPAREN==1000			;PARITY ERRORS ENABLED
LIOPFE=400			;I/O PAFE FAILURES ENABLED
LPWRFE==100			;POWER FAILURES ENABLED
LCASDE==20			;CACHE SWEEP DONE ENABLED

; **********************************************************************
;KL10 CONI APR 000 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

LCASWB==200000			;CACHE SWEEP BUSY
LSBUSE==4000			;SBUS ERROR FLAG
LNXMER==2000			;NON-EXISTENT MEMORY FLAG
LPARER==1000			;PARITY ERROR FLAG
LIOPFE==400			;I/O PAGE FAIL FLAG
LPWRFL==100			;POWER FAIL FLAG
LCASWD==20			;CACHE SWEEP DONE FLAG
LAPRP7==7			;APR PI CHANNEL 7
LAPRP6==6			;APR PI CHANNEL 6
LAPRP5==5			;APR PI CHANNEL 5
LAPRP4==4			;APR PI CHANNEL 4
LAPRP3==3			;APR PI CHANNEL 3
LAPRP2==2			;APR PI CHANNEL 2
LAPRP1==1			;APR PI CHANNEL 1
LINT==10			;APR INTERRUPT

; **********************************************************************
;KL10 DATAO APR 000 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LINSTF==400			;ADDRESS BREAK REQUEST FOR INST. FETCH
LDATAF==200			;ADDRESS BREAK REQUEST FOR DATA FETCH
LWRITE==100			;ADDRESS BREAK REQUEST FOR DATA WRITE
LUSCMP==40			;USER ADDRESS COMPARE
LEXCMP==0			;EXEC ADDRESS COMPARE

; **********************************************************************
;KL10 DATAO APR 000 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

;DATAO APR,ADDRESS SWITCHES=13-35
>
	XLIST
	IFDEF	KL10P0,<
IFDEF	$PAPER,<LIST>
;KL10 CONO APR 000 ASSIGMENTS
; **********************************************************************
LIOCLR==200000			;CLEAR ALL I/O DEVICES
LFLGEN==100000			;ENABLE SELECTED FLAG
LFLGDS==40000			;DISABLE SELECTED FLAG
LFLGCL==20000			;CLEAR SELECTED FLAG
LFLGST==10000			;SET SELECTED FLAG
LSBUSE==4000			;SBUS ERROR FLAG
LNXMER==2000			;NON-EXISTENT MEMORY FLAG
LIOPFE==1000			;I/O PAGE FAIL FLAG
LPARER==400			;MB PARITY ERROR FLAG
LCADRP==200			;CACHE ADDRESS PARITY ERROR FLAG
LSADRP==100			;S-BUS ADDRESS PARITY ERROR FLAG
LPWRFL==40			;POWER FAIL FLAG
LCASWD==20			;CACHE SWEEP DONE FLAG
LAPRP7==7			;APR PI CHANNEL 7
LAPRP6==6			;APR PI CHANNEL 6
LAPRP5==5			;APR PI CHANNEL 5
LAPRP4==4			;APR PI CHANNEL 4
LAPRP3==3			;APR PI CHANNEL 3
LAPRP2==2			;APR PI CHANNEL 2
LAPRP1==1			;APR PI CHANNEL 1
LESBER==104000			;ENABLE SBUS ERRORS
LDSBER==044000			;DISABLE SBUS ERRORS
LCSBER==024000			;CLR SBUS ERRORS
LSSBER==014000			;SET SBUS ERROR
LENXER==102000			;ENABLE NON-EXISTENT MEMORY
LDNXER==042000			;DISABLE NON-EXISTENT MEORY
LCNXER==022000			;CLR NON-EXISTENT MEMORY
LSNXER==012000			;SET NON-EXISTENT MEMORY
LEIOPF==101000			;ENABLE I/O PAGE FAILS
LDIOPF==041000			;DISABLE I/O PAGE FAILS
LCIOPF==021000			;CLR I/O PAGE FAIL
LSIOPF==011000			;SET I/O PAGE FAIL
LEPAER==100400			;ENABLE PARITY ERRORS
LDPAER==040400			;DISABLE PARITY ERRORS
LCPAER==020400			;CLR PARITY ERROR
LSPAER==010400			;SET PARITY ERROR
LECAER==100200			;ENABLE CACHE ADR PARITY ERRORS
LDCAER==040200			; " DISABLE
LCCAER==020200			; " CLR
LSCAER==010200			; " SET
LESAER==100100			;ENABLE S-BUS ADR PARITY ERRORS
LDSAER==040100			; " DISABLE
LCSAER==020100			; " CLR
LSSAER==010100			; " SET
LEPWRF==100040			;ENABLE POWER FAIL
LDPWRF==040400			;DISABLE POWER FAIL
LCPWRF==020040			;CLR POWER FAIL
LSPWRF==010040			;SET POWER FAIL
LECASD==100020			;ENABLE CACHE SWEEP DONE
LDCASD==040020			;DISABLE CACHE SWEEP DONE
LCCASD==020020			;CLR CACHE SWEEP DONE
LSCASD==010020			;SET CACHE SWEEP DONE
LAPRAL==127760			;CLR ALL ERROR FLAGS & ENABLE
; **********************************************************************
;KL10 CONI APR 000 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LSBSEN==4000			;SBUS ERRORS ENABLED
LNXMEN==2000			;NON-EXISTENT MEMORY ERRORS ENABLED
LIOPFE==1000			;I/O PAGE FAILURES ENABLED
LPAREN==400			;PARITY ERRORS ENABLED
LCADEN==200			;CACHE ADR PARITY ERRORS ENABLED
LSADEN==100			;S-BUS ADR PARITY ERRORS ENABLED
LPWRFE==40			;POWER FAILURES ENABLED
LCASDE==20			;CACHE SWEEP DONE ENABLED

; **********************************************************************
;KL10 CONI APR 000 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

LCASWB==200000			;CACHE SWEEP BUSY
LSBUSE==4000			;SBUS ERROR FLAG
LNXMER==2000			;NON-EXISTENT MEMORY FLAG
LIOPFE==1000			;I/O PAGE FAIL FLAG
LPARER==400			;PARITY ERROR FLAG
LCADRP==200			;CACHE ADR PARITY ERROR FLAG
LSADRP==100			;S-BUS ADR PARITY ERROR FLAG
LPWRFL==40			;POWER FAIL FLAG
LCASWD==20			;CACHE SWEEP DONE FLAG
LAPRP7==7			;APR PI CHANNEL 7
LAPRP6==6			;APR PI CHANNEL 6
LAPRP5==5			;APR PI CHANNEL 5
LAPRP4==4			;APR PI CHANNEL 4
LAPRP3==3			;APR PI CHANNEL 3
LAPRP2==2			;APR PI CHANNEL 2
LAPRP1==1			;APR PI CHANNEL 1
LINT==10			;APR INTERRUPT

; **********************************************************************
;KL10 DATAO APR 000 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LINSTF==400			;ADDRESS BREAK REQUEST FOR INST. FETCH
LDATAF==200			;ADDRESS BREAK REQUEST FOR DATA FETCH
LWRITE==100			;ADDRESS BREAK REQUEST FOR DATA WRITE
LUSCMP==40			;USER ADDRESS COMPARE
LEXCMP==0			;EXEC ADDRESS COMPARE

; **********************************************************************
;KL10 DATAO APR 000 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

;DATAO APR,ADDRESS SWITCHES=13-35
>
	XLIST
IFDEF	$PAPER,<LIST>
; **********************************************************************
;KL10 DATAI APR 000 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LINSTF==400			;ADDRESS BREAK REQUEST FOR INST. FETCH
LDATAF==200			;ADDRESS BREAK REQUEST FOR DATA FETCH
LWRITE==100			;ADDRESS BREAK REQUEST FOR DATA WRITE
LUSCMP==40			;USER ADDRESS COMPARE
LEXCMP==0			;EXEC ADDRESS COMPARE

; **********************************************************************
;KL10 DATAI APR 000 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

;DATAI APR,ADDRESS SWITCHES=13-35

; **********************************************************************
;KL10 BLKO APR 000 ASSIGMENTS (IMMEDIATE MODE)
; **********************************************************************

;REFILL ALGORITHM BITS 18-20
;REFILL ALGORITHM ADDRESS 27-33

; **********************************************************************
;KL10 BLKI APR 000 ASSIGMENTS
; **********************************************************************

;MICRO-CODE OPTIONS = 0-8
;MICRO-CODE VERSION NUMBER = 9-17
;HARDWARE OPTIONS =18-23
;PROCESSOR SERIAL NUMBER = 24-35
; **********************************************************************
;KL10 CONO PI 004 ASSIGMENTS
; **********************************************************************

LEVNPA==400000			;WRITE EVEN PARITY ADDRESS
LEVNPD==200000			;WRITE EVEN PARITY DATA
LEVNCD==100000			;WRITE EVEN CACHE DIRECTORY PARITY *P0
LRQCLR==20000			;DROP INTERRUPT ON SELECTED CHANNEL
LPICLR==10000			;CLEAR PI SYSTEM
LREQSE==4000			;REQUEST INTERRUPT ON SELECTED CHANNEL
LCHNON=2000			;TURN ON SELECTED CHANNEL
LCHNOF==1000			;TURN OFF SELECTED CHANNEL
LPIOFF==400			;TURN PI SYSTEM OFF
LPION==200			;TURN PI SYSTEM ON
LPICH1==100			;PI CHANNEL 1
LPICH2==40			;PI CHANNEL 2
LPICH3==20			;PI CHANNEL 3
LPICH4==10			;PI CHANNEL 4
LPICH5==4			;PI CHANNEL 5
LPICH6==2			;PI CHANNEL 6
LPICH7==1			;PI CHANNEL 7
LPICHA==177			;ALL PI CHANNELS

; **********************************************************************
;KL10 CONI PI 004 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LPRCH1==100			;PROGRAM REQUEST ON CHANNEL 1
LPRCH2==40			;PROGRAM REQUEST ON CHANNEL 2
LPRCH3==20			;PROGRAM REQUEST ON CHANNEL 3
LPRCH4==10			;PROGRAM REQUEST ON CHANNEL 4
LPRCH5==4			;PROGRAM REQUEST ON CHANNEL 5
LPRCH6==2			;PROGRAM REQUEST ON CHANNEL 6
LPRCH7==1			;PROGRAM REQUEST ON CHANNEL 7
; **********************************************************************
;KL10 CONI PI 004 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

LEVNPA==400000			;WRITE EVEN PARITY ADDRESS
LEVNPD==200000			;WRITE EVEN PARITY DATA
LEVNCD==100000			;WRITE EVEN CACHE DIRECTORY PARITY *P0
LPIIP1==40000			;PI IN PROGRESS ON CHANNEL 1
LPIIP2==20000			;PI IN PROGRESS ON CHANNEL 2
LPIIP3==10000			;PI IN PROGRESS ON CHANNEL 3
LPIIP4==4000			;PI IN PROGRESS ON CHANNEL 4
LPIIP5==2000			;PI IN PROGRESS ON CHANNEL 5
LPIIP6==1000			;PI IN PROGRESS ON CHANNEL 6
LPIIP7==400			;PI IN PROGRESS ON CHANNEL 7
LPION==200			;PI SYSTEM ON
LPICH1==100			;PI CHANNEL 1 ON
LPICH2==40			;PI CHANNEL 2 ON
LPICH3==20			;PI CHANNEL 3 ON
LPICH4==10			;PI CHANNEL 4 ON
LPICH5==4			;PI CHANNEL 5 ON
LPICH6==2			;PI CHANNEL 6 ON
LPICH7==1			;PI CHANNEL 7 ON
; **********************************************************************
;KL10 DATAO PAG 010 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LLACBL==400000			;LOAD AC BLOCKS
LLPRCN==200000			;LOAD PREVIOUS CONTEXT SECTION
LLDUSB==100000			;LOAD USER BASE REGISTER
LCWSX==40			;

;CURRENT AC BLOCKS BITS 6 - 8
;PREVIOUS AC BLOCKS BITS 9 - 11
;PREVIOUS CONTEXT SECTION BITS 13 - 17

; **********************************************************************
;KL10 DATAO PAG 010 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

;USER BASE REGISTER BITS 23 - 35

; **********************************************************************
;KL10 DATAI PAG 010 ASSIGMENTS (LEFT HALF)
; **********************************************************************

LLACBL==400000			;LOAD AC BLOCKS
LLPRCN==200000			;LOAD PREVIOUS CONTEXT SECTION
LLDUSB==100000			;LOAD USER BASE REGISTER
LCWSX==40			;

;CURRENT AC BLOCKS BITS 6 - 8
;PREVIOUS AC BLOCKS BITS 9 - 11
;PREVIOUS CONTEXT SECTION BITS 13 - 17

; **********************************************************************
;KL10 DATAI PAG 010 ASSIGMENTS (RIGHT HALF)
; **********************************************************************

;USER BASE REGISTER BITS 23 - 35
; **********************************************************************
;KL10 CONO PAG 010 ASSIGMENTS
; **********************************************************************

LCASLO==400000			;CACHE STRATEGY LOOK
LCASLD==200000			;CACHE STRATEGY LOAD
LSMODE==40000			;SECTION MODE
LTRPEN==20000			;TRAP AND PAGE ENABLE

;EXEC BASE REGISTER = 23-35

; **********************************************************************
;KL10 CONI PAG 010 ASSIGMENTS
; **********************************************************************


LCSLOO==400000			;CACHE STRATEGY LOOK
LCSLOA==200000			;CACHE STRATEGY LOAD
LSECMO==40000			;SECTION MODE
LTRPAE==20000			;TRAP AND PAGE ENABLE

;EXEC BASE REGISTER = 23-35

; **********************************************************************
;KL10 BLKO PAG 010 ASSIGMENTS (IMMEDIATE MODE)
; **********************************************************************

	XLIST
	IFNDEF	KL10P0,<
IFDEF	$PAPER,<LIST>
; **********************************************************************
;KL10 EXEC PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

LAROVT==421			;ARITHMETIC TRAP
LPDOVT==422			;PUSHDOWN OVERFLOW TRAP
LTRP3T==423			;TRAP 3 TRAP

; **********************************************************************
;KL10 USER PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

LEUPFW==420			;EXEC & USER PAGE FAIL WORD
LAROVT==421			;ARITHMETIC TRAP
LPDOVT==422			;PUSHDOWN OVERFLOW TRAP
LTRP3T==423			;TRAP 3 TRAP

LMUUO==	424			;MUUO STORAGE
LMUUOP==425			;C(PC) OF MUUO STORAGE

LPFWPC==426			;C(PC) OF PAGE FAIL WORD
LPGFTR==427			;PAGE FAIL NEW PC TRAP

LKNTRP==430			;KERNAL	 	NO TRAP - NEW PC'S-
LKTRP==	431			;"	 	TRAP
LSNTRP==432			;SUPERVISOR	NO TRAP
LSTRP==	433			;"		TRAP
LCNTRP==434			;CONCEAL 	NO TRAP
LCTRP==	435			;"		TRAP
LPNTRP==436			;PUBLIC		NO TRAP
LPTRP==	437			;"		TRAP

>
	XLIST
	IFDEF	KL10P0,<
IFDEF	$PAPER,<LIST>
; **********************************************************************
;KL10 EXEC PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

LAROVT==421			;ARITHMETIC TRAP
LPDOVT==422			;PUSHDOWN OVERFLOW TRAP
LTRP3T==423			;TRAP 3 TRAP

LTBASH==510			;TIME-BASE, HI
LTBASL==511			;TIME-BASE, LO
LPRFMH==512			;PERFORMANCE ANAYLYSIS, HI
LPRFML==513			;PERFORMANCE ANAYLYSIS, LO

; **********************************************************************
;KL10 USER PAGE MAP PAGE ASSIGNMENTS
; **********************************************************************

LAROVT==421			;ARITHMETIC TRAP
LPDOVT==422			;PUSHDOWN OVERFLOW TRAP
LTRP3T==423			;TRAP 3 TRAP

LMUUO==	424			;MUUO STORAGE
LMUUOP==425			;C(PC) OF MUUO STORAGE
LCNTXT==426			;PROCESS CONTEXT WORD

LKNTRP==430			;KERNAL	 	NO TRAP - NEW PC'S-
LKTRP==	431			;"	 	TRAP
LSNTRP==432			;SUPERVISOR	NO TRAP
LSTRP==	433			;"		TRAP
LCNTRP==434			;CONCEAL 	NO TRAP
LCTRP==	435			;"		TRAP
LPNTRP==436			;PUBLIC		NO TRAP
LPTRP==	437			;"		TRAP

LEUPFW==500			;EXEC & USER PAGE FAIL WORD
LPFWPC==501			;C(PC) OF PAGE FAIL WORD
LPGFTR==502			;PAGE FAIL NEW PC

LEBXMH==504			;E-BOX CLOCK TICK METER, HI
LEBXML==505			;E-BOX CLOCK TICK METER, LO
LMBXMH==506			;M-BOX CYCLE METER, HI
LMBXML==507			;M-BOX CYCLE METER, LO

>>				;END CONDITIONAL ON KL10
	LIST