Jeff Parsons
|
a06a4c9324
|
Fixed RL11 disk memory access (addresses are always mapped, apparently)
|
2016-11-29 17:10:37 -08:00 |
|
Jeff Parsons
|
cacff66983
|
Lots of memory interface cleanup; still can't boot RSTS/E though....
|
2016-11-29 14:48:26 -08:00 |
|
Jeff Parsons
|
375146f6bb
|
Hacked the Bus component to permit devices to access the actual memory map (better solution will be maintain two separate maps: one for the CPU and a separate map for device access)
|
2016-11-28 13:27:06 -08:00 |
|
Jeff Parsons
|
559a7eb8fa
|
All but one attempted diagnostic test (EKBBF0 TEST 63) passes now
|
2016-11-26 13:25:15 -08:00 |
|
Jeff Parsons
|
47a65f043f
|
Cleaned up IRQ handling, added support for DL11 overrun errors, and fixed buffered message output (although a better solution is needed longer term)
|
2016-11-26 11:38:03 -08:00 |
|
Jeff Parsons
|
7f48221bca
|
Fixed TEST 40 in diagnostic EKBBF0 by including address 177776 in the RED stack overflow range
|
2016-11-24 09:14:01 -08:00 |
|
Jeff Parsons
|
708869815d
|
Fixed DL11 for RT-11, and added more message capabilities
|
2016-11-22 16:54:45 -08:00 |
|
Jeff Parsons
|
f70f1f3d97
|
Isolated some PDP-11/20-specific behavior to that model
|
2016-11-21 09:42:20 -08:00 |
|
Jeff Parsons
|
48047c4a60
|
Fixed the evaluation of register operands for the XOR opcode (this slipped through the cracks, since it doesn't use readSrcWord())
|
2016-11-20 13:45:08 -08:00 |
|
Jeff Parsons
|
b98a31c7b8
|
Converted previous notes to a TODO
|
2016-11-19 17:13:04 -08:00 |
|
Jeff Parsons
|
a6689e1458
|
Added notes on the question of whether addressing mode 5 (auto-decrement deferred) can trigger a stack overflow on any PDP-11 model
|
2016-11-19 17:08:43 -08:00 |
|
Jeff Parsons
|
687439e57e
|
More cleanup of RED stack overflow handling
|
2016-11-19 16:42:52 -08:00 |
|
Jeff
|
0493daef10
|
Added some more information about one of the stranger EKBEE1 tests (TEST 122: KT BEND)
|
2016-11-19 11:32:42 -08:00 |
|
Jeff
|
f1c0dce8ab
|
Cleaned up checkStackLimit() processing, fixing some problems along the way (most notably, mode 6 references were not being checked)
|
2016-11-18 20:27:42 -08:00 |
|
Jeff
|
4f912a56c5
|
The PDP-11 EKBEE1 diagnostic finally passes (on a 256Kb PDP-11/70 configuration at least)
|
2016-11-18 10:43:10 -08:00 |
|
Jeff
|
60970617ce
|
Another PDP-11 EKBEE1 diagnostic failure bites the dust
|
2016-11-18 09:38:50 -08:00 |
|
Jeff
|
7088a185fd
|
Fixed a few more MMU bugs uncovered by the EKBEE1 diagnostics; the end is in sight
|
2016-11-17 23:51:30 -08:00 |
|
Jeff
|
861d78e6d2
|
Added support for address-specific message categories in I/O tables
|
2016-11-17 17:47:57 -08:00 |
|
Jeff
|
05c2f0ebfe
|
Fixed a double-trap MMU bug (both src and dst operands triggered a trap, but since the latter was an abort, the former needed to be ignored)
|
2016-11-17 16:21:13 -08:00 |
|
Jeff
|
9148cec085
|
Added MMU dump command ("d mmu [filter]"), fixed byte updates of PDRs, masked 18-bit UNIBUS addresses when UNIBUS relocation map not enabled, and fixed reads of MMR0 when ABORT bits are set
|
2016-11-17 13:22:25 -08:00 |
|
Jeff
|
2b23c86649
|
Debugger improvements (dumping/setting MMU registers)
|
2016-11-16 17:44:52 -08:00 |
|
Jeff
|
00d6fb6c59
|
Allow pasted text in the virtual SerialPort window to be processed as received data, and tidy up the MMR0 updates
|
2016-11-16 13:54:10 -08:00 |
|
Jeff
|
9d67f243ef
|
Fixed MMR1/MMR2 updates, and synced boot monitor code with http://skn.noip.me/pdp11/boot.mac
|
2016-11-15 16:16:38 -08:00 |
|
Jeff
|
7342ea254e
|
Apparently, 248Kb 11/70 configurations are not normal (diagnostic EKBEE1 complains), so all those machine configs have been bumped to 256Kb
|
2016-11-15 10:38:43 -08:00 |
|
Jeff
|
5bc0c8cca9
|
Simplified the I/O registration function, added support for Panel debugger messages, and added some new Panel behavior on the RESET instruction
|
2016-11-15 10:05:25 -08:00 |
|
Jeff
|
0370b81a69
|
Leave the DATA display register alone on the 11/70 (making it more diagnostic-friendly)
|
2016-11-14 15:27:55 -08:00 |
|
Jeff
|
0607d65b70
|
Fixed RTI on older PDP-11s (ie, 11/20); the old RTI behaves like the new RTT, which did not exist on older machines
|
2016-11-13 21:17:46 -08:00 |
|
Jeff
|
d533ae69aa
|
Fixed a hardware interrupt signalling check in MAINDEC Test #15
|
2016-11-13 19:08:00 -08:00 |
|
Jeff
|
85163fe823
|
Updated comments in readSrcWord()
|
2016-11-13 11:50:07 -08:00 |
|
Jeff
|
17816f6fcc
|
Fixed bug in writeDstWord() that was updating flags with negative data (and sadly, none of DEC's basic tests caught it)
|
2016-11-13 11:34:59 -08:00 |
|
Jeff
|
2c1191ce6e
|
DEC's "TRAP TEST" finally passes (and I learned a lot about PDP-11 opcode idiosyncrasies in the process)
|
2016-11-12 12:54:13 -08:00 |
|
Jeff
|
b87c77b0a0
|
Factored trap checks into separate function: checkTraps()
|
2016-11-11 15:49:37 -08:00 |
|
Jeff
|
bdb06e458f
|
Fixed TRAP TEST diagnostic that expected a stack overflow trap to be acknowledged immediately after a hardware interrupt was dispatched
|
2016-11-11 14:56:01 -08:00 |
|
Jeff
|
db63c30c1e
|
Made some progress with DEC's "TRAP TEST", but looks like it still needs some work
|
2016-11-10 15:51:47 -08:00 |
|
Jeff
|
eb6bf8a5a5
|
Fixed ASRB and RORB instructions, added a new dump command ("ds"), and fixed timer function initialization
|
2016-11-10 06:10:54 -08:00 |
|
Jeff
|
595c40e446
|
Cleaned up the Front Panel address and data interfaces so that BOOTMON's "LIGHTS" test works as expected now
|
2016-11-09 12:46:03 -08:00 |
|
Jeff
|
eb3b38a5ad
|
Fixed XXDP disk boot (haven't tried any tests yet, but it's still good progress)
|
2016-11-07 17:20:53 -08:00 |
|
Jeff
|
0cf11c0b01
|
Fixed the memory clear "toggle-in", by returning the correct amount of installed RAM, and passing properly masked addresses to all the I/O handlers
|
2016-11-04 17:09:50 -07:00 |
|
Jeff
|
0afab359ad
|
The memory management toggle-in passes (see /devices/pdp11/machine/1170/panel/debugger)
|
2016-11-02 21:20:04 -07:00 |
|
Jeff
|
d5c7bf0b5d
|
More Front Panel improvements
|
2016-11-02 13:35:50 -07:00 |
|
Jeff
|
caf0a728f8
|
More PDP-11 front panel functionality
|
2016-11-01 19:02:06 -07:00 |
|
Jeff
|
daefc2992c
|
Attempted to clean up mapUnibus() and bus-related faults; how well or ill-advised these changes are remains to be seen
|
2016-10-31 12:44:29 -07:00 |
|
Jeff
|
04be27b47b
|
Added some RL11 register definitions
|
2016-10-25 14:40:33 -07:00 |
|
Jeff Parsons
|
de916981f3
|
It is now possible to re-attach or re-load the current paper tape; re-attaching means repositioning it at the beginning, and re-loading means loading it into RAM again. Note that whenever you reload a tape, it's HIGHLY recommended that you reset the machine first, too.
|
2016-10-23 13:44:31 -07:00 |
|
Jeff Parsons
|
89dc2660f1
|
Added more PDP-11 paper tape resources
|
2016-10-22 21:57:45 -07:00 |
|
Jeff Parsons
|
49b5e34ba2
|
Remove all debugger.js files when running uncompiled without the Debugger, and some PDP-11 layout fixes
|
2016-10-22 01:36:45 -07:00 |
|
Jeff Parsons
|
35f931f492
|
Fixed stepCPU() so that, if a Debugger is present, it always calls checkInstruction() on at least the first instruction of a run, so that Debugger features like skipping over an initial HALT opcode works properly
|
2016-10-21 23:24:27 -07:00 |
|
Jeff Parsons
|
5808778351
|
Added getTrapStatus() so that the Debugger can display trap information whenever a trap has just occurred, updated FileDump to store 'load' and 'exec' properties in MACRO-11 listing dumps (so that the individual machine files don't have to specify hard-coded 'load' and 'exec' values themselves), and added a new SerialPort parameter (upperCase) that can be used to force all received data to upper-case
|
2016-10-21 21:07:26 -07:00 |
|
Jeff Parsons
|
3db1439b40
|
Improved Debugger focus handling, added a new zeroMemory() Bus interface, and updated the RAM component's reset() function to re-zero RAM and then restore any predefined contents
|
2016-10-21 12:15:02 -07:00 |
|
Jeff Parsons
|
aa2a25c5ec
|
Minor Debugger improvements, notes, etc, while debugging the PDP-11 BASIC
|
2016-10-20 22:56:29 -07:00 |
|