Jeff
|
595c40e446
|
Cleaned up the Front Panel address and data interfaces so that BOOTMON's "LIGHTS" test works as expected now
|
2016-11-09 12:46:03 -08:00 |
|
Jeff
|
0de3db14b6
|
Revert back to propagating R0 to the Front Panel data path on a WAIT instruction (per PDP-11 lore)
|
2016-11-08 14:22:23 -08:00 |
|
Jeff
|
0a179a5f55
|
Fixed the LKS Monitor bit
|
2016-11-08 09:24:42 -08:00 |
|
Jeff
|
a88e2d7b39
|
Fixed the frequency of PDP-11 display updates
|
2016-11-07 18:30:33 -08:00 |
|
Jeff
|
eb3b38a5ad
|
Fixed XXDP disk boot (haven't tried any tests yet, but it's still good progress)
|
2016-11-07 17:20:53 -08:00 |
|
Jeff
|
8188554875
|
Fixed the fallback logic for IOPAGE ranges where only byte handlers exist (ie, the readROMByte() case)
|
2016-11-06 09:48:12 -08:00 |
|
Jeff
|
c67176eab0
|
Added the ability to install external ROMs (eg, M9312 ROM images) into the IOPAGE
|
2016-11-05 12:01:56 -07:00 |
|
Jeff
|
0cf11c0b01
|
Fixed the memory clear "toggle-in", by returning the correct amount of installed RAM, and passing properly masked addresses to all the I/O handlers
|
2016-11-04 17:09:50 -07:00 |
|
Jeff
|
a7a44a8288
|
Cleaned up the PDP-11 updateDisplay(s) code, and removed the update hack inside the WAIT instruction; display updates now occur in sync with the machine's 60Hz clock
|
2016-11-04 13:35:20 -07:00 |
|
Jeff
|
0d11d279bb
|
Changed SDR and SAR register references to PDR and PAR, which seems in keeping with more of DEC's own literature
|
2016-11-03 17:19:15 -07:00 |
|
Jeff
|
56bdd84e1a
|
Promoted the working version to 1.30.3
|
2016-11-03 16:24:56 -07:00 |
|
Jeff
|
3b88e4c53c
|
Memory can now be explicitly "zeroed" with any byte pattern (but the default is still zero); note that memory blocks are still always zero-initialized when first created
|
2016-11-03 15:50:19 -07:00 |
|
Jeff
|
97de321daa
|
Fixed zeroMemory() to properly zero any block(s) that originally underlaid the IOPAGE block(s), rather than trying to zero the IOPAGE block itself (which would be a bad idea)
|
2016-11-03 15:36:37 -07:00 |
|
Jeff
|
d67e848973
|
Changed 11/70 machines to allocate RAM as a single chunk, and updated the 11/70 page on toggle-ins (/devices/pdp11/machine/1170/panel/debugger/README.md)
|
2016-11-03 14:42:35 -07:00 |
|
Jeff
|
57bceb4da9
|
Fixed the LED (lamp) test, fixed Front Panel update on a machine RESET, and cleaned up the status update code a bit
|
2016-11-03 10:28:54 -07:00 |
|
Jeff
|
0afab359ad
|
The memory management toggle-in passes (see /devices/pdp11/machine/1170/panel/debugger)
|
2016-11-02 21:20:04 -07:00 |
|
Jeff
|
b3bf213cd9
|
Enable the Debugger to get/set front panel switches as register SW
|
2016-11-02 19:41:29 -07:00 |
|
Jeff
|
d5c7bf0b5d
|
More Front Panel improvements
|
2016-11-02 13:35:50 -07:00 |
|
Jeff
|
caf0a728f8
|
More PDP-11 front panel functionality
|
2016-11-01 19:02:06 -07:00 |
|
Jeff
|
daefc2992c
|
Attempted to clean up mapUnibus() and bus-related faults; how well or ill-advised these changes are remains to be seen
|
2016-10-31 12:44:29 -07:00 |
|
Jeff
|
96ad4ec37e
|
Lots of work to try to bring the new RL11 component up to snuff
|
2016-10-29 11:32:31 -07:00 |
|
Jeff
|
64845d782f
|
Fixed a tiny oversight in buildFileTable() when using a 320Kb diskette formatted by DOS 1.10
|
2016-10-28 09:46:29 -07:00 |
|
Jeff
|
88b485d094
|
Added a variety of checks and automatic repairs to DiskDump, aimed primarily at issues I've come across with pre-DOS 2.0 diskettes (eg, diskettes without BPBs, like 160Kb diskettes from DOS 1.0 and 320Kb diskettes from DOS 1.1)
|
2016-10-27 17:59:20 -07:00 |
|
Jeff
|
04be27b47b
|
Added some RL11 register definitions
|
2016-10-25 14:40:33 -07:00 |
|
Jeff Parsons
|
9e480d7574
|
Added new RL11 component (work-in-progress)
|
2016-10-24 16:28:48 -07:00 |
|
Jeff Parsons
|
de916981f3
|
It is now possible to re-attach or re-load the current paper tape; re-attaching means repositioning it at the beginning, and re-loading means loading it into RAM again. Note that whenever you reload a tape, it's HIGHLY recommended that you reset the machine first, too.
|
2016-10-23 13:44:31 -07:00 |
|
Jeff Parsons
|
9ecb9e948f
|
More tweaks to the on-going tension between giving machine elements focus (especially problematic when there are multiple machines) and preventing the page from being yanked around
|
2016-10-23 09:24:26 -07:00 |
|
Jeff Parsons
|
d0618c34bc
|
Added more PDP-11 paper tape resources
|
2016-10-23 00:43:20 -07:00 |
|
Jeff Parsons
|
89dc2660f1
|
Added more PDP-11 paper tape resources
|
2016-10-22 21:57:45 -07:00 |
|
Jeff Parsons
|
f7f9de1e36
|
Creating a top-level Software link to both the Apps and Disks collections
|
2016-10-22 09:31:26 -07:00 |
|
Jeff Parsons
|
35f931f492
|
Fixed stepCPU() so that, if a Debugger is present, it always calls checkInstruction() on at least the first instruction of a run, so that Debugger features like skipping over an initial HALT opcode works properly
|
2016-10-21 23:24:27 -07:00 |
|
Jeff Parsons
|
5808778351
|
Added getTrapStatus() so that the Debugger can display trap information whenever a trap has just occurred, updated FileDump to store 'load' and 'exec' properties in MACRO-11 listing dumps (so that the individual machine files don't have to specify hard-coded 'load' and 'exec' values themselves), and added a new SerialPort parameter (upperCase) that can be used to force all received data to upper-case
|
2016-10-21 21:07:26 -07:00 |
|
Jeff Parsons
|
5f05913036
|
Fixed fault generation on invalid memory accesses; PDP-11 BASIC now starts up!
|
2016-10-21 17:06:41 -07:00 |
|
Jeff Parsons
|
22e24697fe
|
Fixed read/write breakpoints for instructions that snapshot the cycle count, and improved the disassembly of PC-relative operands
|
2016-10-21 13:45:01 -07:00 |
|
Jeff Parsons
|
3db1439b40
|
Improved Debugger focus handling, added a new zeroMemory() Bus interface, and updated the RAM component's reset() function to re-zero RAM and then restore any predefined contents
|
2016-10-21 12:15:02 -07:00 |
|
Jeff Parsons
|
21d91cbcfa
|
Fixed the components.xsl for PDPjs machines, and added more instructions, resource links, etc, for the PDP-11 demo machines
|
2016-10-20 15:16:22 -07:00 |
|
Jeff Parsons
|
5e9891292c
|
Added progress bar control (for the PC11 paper tape reader)
|
2016-10-19 14:16:14 -07:00 |
|
Jeff Parsons
|
bff199ee7f
|
Fixed the PC11 component to deliver bytes at (roughly) the same rate as a physical "high speed" paper tape reader would (TODO: Add a paper tape status display)
|
2016-10-19 11:31:43 -07:00 |
|
Jeff Parsons
|
13a1dedbc7
|
Supoprt for tape images in the Absolute Loader format has been moved to the RAM component, so that those images can be preloaded into RAM in the same way that raw bootstrap images can; the RAM component now provides Absolute Loader image parsing as a service to other components that need it (specifically, the PC11 tape reader)
|
2016-10-19 11:10:38 -07:00 |
|
Jeff Parsons
|
69b7a682d8
|
Added code to parse tape data and load it directly into memory if the LOAD button is used instead of the ATTACH button
|
2016-10-18 20:53:26 -07:00 |
|
Jeff Parsons
|
6c4f8f4bb3
|
Code in place for parsing tape data when "load" (as opposed to "attach") is requested
|
2016-10-18 16:53:20 -07:00 |
|
Jeff Parsons
|
16b8b59f12
|
PDP-11/20 test machine can load BASIC from paper tape, but still has some trouble running it
|
2016-10-18 15:44:26 -07:00 |
|
Jeff Parsons
|
6683c81299
|
Created dedicated getOpcode() function, replaced getPCWord()
|
2016-10-18 10:50:05 -07:00 |
|
Jeff Parsons
|
599228db46
|
Assorted PC11 tape loading fixes
|
2016-10-18 10:30:34 -07:00 |
|
Jeff Parsons
|
961dce8f78
|
Added PC11 support for loading tapes remotely
|
2016-10-17 18:22:42 -07:00 |
|
Jeff Parsons
|
ed24094683
|
Lots of tweaks in advance of PDPjs support for loading tape files
|
2016-10-17 15:19:01 -07:00 |
|
Jeff Parsons
|
980c2ac5ab
|
Updated PC8080 and PDPjs to support RAM images, eliminating the need for the old "writable ROM" kludge; RAM images can include their own load and exec addresses as part of the JSON file, but the RAM component can provide explicit overrides (if no load address is specified either way, the default load address is the starting RAM address)
|
2016-10-17 11:01:32 -07:00 |
|
Jeff Parsons
|
e44bd4acec
|
Register PC11 I/O handlers
|
2016-10-15 17:55:16 -07:00 |
|
Jeff Parsons
|
0f4cbd6e7b
|
Added my first PDP-11 add-on device component (PC11)
|
2016-10-15 16:32:59 -07:00 |
|
Jeff Parsons
|
b79146880d
|
Debugger now restricts opcodes to the current CPU model
|
2016-10-15 15:01:39 -07:00 |
|