Created a page for the XXDP diagnostics, to document information about them as I learn...
This commit is contained in:
Jeff
Jeff Parsons
parent
595c40e446
commit
a4afe2de77
2 changed files with 229 additions and 1 deletions
|
|
@ -10,4 +10,4 @@ DEC RL02K Disk Images
|
||||||
RL02K disks are single-platter cartridges with 512 tracks per side, 40 sectors per track, and a sector size of 256 bytes,
|
RL02K disks are single-platter cartridges with 512 tracks per side, 40 sectors per track, and a sector size of 256 bytes,
|
||||||
for a total capacity of 10Mb. They are used with an [RL11 Disk Controller](/devices/pdp11/rl11/).
|
for a total capacity of 10Mb. They are used with an [RL11 Disk Controller](/devices/pdp11/rl11/).
|
||||||
|
|
||||||
* XXDP+ Diagnostics [[source](http://skn.noip.me/pdp11/)]
|
* [XXDP+ Diagnostics](xxdp/) [[source](http://skn.noip.me/pdp11/)]
|
||||||
|
|
|
||||||
228
disks/dec/rl02k/xxdp/README.md
Normal file
228
disks/dec/rl02k/xxdp/README.md
Normal file
|
|
@ -0,0 +1,228 @@
|
||||||
|
---
|
||||||
|
layout: page
|
||||||
|
title: DEC RL02K Disk Images: XXDP+
|
||||||
|
permalink: /disks/dec/rl02k/xxdp/
|
||||||
|
---
|
||||||
|
|
||||||
|
DEC RL02K Disk Images: XXDP+
|
||||||
|
----------------------------
|
||||||
|
|
||||||
|
To boot the "XXDP+ Diagnostics" disk, start a [PDP-11/70](devices/pdp11/machine/1170/panel/debugger/) machine and then select
|
||||||
|
the "XXDP+ Diagnostics" disk from the "Disk Drive Controls", click "Load", and wait for the message:
|
||||||
|
|
||||||
|
Mounted disk "XXDP+ Diagnostics" in drive RL0
|
||||||
|
|
||||||
|
Then start the machine (click "Run") and make sure the following prompt has been displayed:
|
||||||
|
|
||||||
|
PDP-11 MONITOR V1.0
|
||||||
|
|
||||||
|
BOOT>
|
||||||
|
|
||||||
|
At the prompt, type "BOOT RL0". The following text should appear:
|
||||||
|
|
||||||
|
CHMDLD0 XXDP+ DL MONITOR
|
||||||
|
BOOTED VIA UNIT 0
|
||||||
|
28K UNIBUS SYSTEM
|
||||||
|
|
||||||
|
ENTER DATE (DD-MMM-YY):
|
||||||
|
|
||||||
|
RESTART ADDR: 152010
|
||||||
|
THIS IS XXDP+. TYPE "H" OR "H/L" FOR HELP.
|
||||||
|
|
||||||
|
.
|
||||||
|
|
||||||
|
The "H" command displays the following information:
|
||||||
|
|
||||||
|
Monitor Commands
|
||||||
|
----------------
|
||||||
|
|
||||||
|
R run a program
|
||||||
|
L load a program
|
||||||
|
S start a program
|
||||||
|
C run a batch job (chain)
|
||||||
|
D list directory of load medium
|
||||||
|
F set the terminal fill count
|
||||||
|
E enable alternate system device
|
||||||
|
H type help information
|
||||||
|
|
||||||
|
|
||||||
|
DRS Commands
|
||||||
|
------------
|
||||||
|
Execution
|
||||||
|
---------
|
||||||
|
START start the diagnostic and initialize
|
||||||
|
RESTART start diagnostic and do not initialize
|
||||||
|
CONTINUE continue diagnostic at test that was
|
||||||
|
interrupted by a ^C
|
||||||
|
PROCEED continue from an error halt
|
||||||
|
|
||||||
|
Units Under Test
|
||||||
|
----------------
|
||||||
|
ADD activate a unit for testing
|
||||||
|
DROP deactivate a unit
|
||||||
|
DISPLAY print a list of device information
|
||||||
|
|
||||||
|
Flags
|
||||||
|
-----
|
||||||
|
FLAGS print status of all flags
|
||||||
|
ZFLAGS reset all flags
|
||||||
|
|
||||||
|
Statistics
|
||||||
|
----------
|
||||||
|
PRINT print statistical information
|
||||||
|
|
||||||
|
Exitting
|
||||||
|
--------
|
||||||
|
EXIT return to XXDP+ runtime monitor
|
||||||
|
|
||||||
|
|
||||||
|
DRS Command Switches
|
||||||
|
--------------------
|
||||||
|
/TESTS:test-list execute only the tests specified
|
||||||
|
/PASS:ddddd execute ddddd passes (ddddd = 1 to 64000)
|
||||||
|
/FLAGS:flag-list set specified flags
|
||||||
|
/EOP:ddddd report end-of-pass after each ddddd passes
|
||||||
|
(ddddd = 1 to 64000)
|
||||||
|
/UNITS:unit-list command will affect only specified units
|
||||||
|
|
||||||
|
|
||||||
|
DRS Flags
|
||||||
|
---------
|
||||||
|
|
||||||
|
Flag Effect
|
||||||
|
---- ------
|
||||||
|
HOE halt on error - control is returned to runtime
|
||||||
|
services command mode
|
||||||
|
LOE loop on error
|
||||||
|
IER inhibit all error reports
|
||||||
|
IBE inhibit all error reports except first level (first
|
||||||
|
level contains error type, number, PC, test and
|
||||||
|
unit)
|
||||||
|
IXE inhibit extended error reports (those called by
|
||||||
|
PRINTX macro's)
|
||||||
|
PRI direct messages to line printer
|
||||||
|
PNT print test number as test executes
|
||||||
|
BOE "bell" on error
|
||||||
|
UAM unattended mode (no manual intervention)
|
||||||
|
ISR inhibit statistical reports (does not apply to
|
||||||
|
diagnostics which do not support statistical
|
||||||
|
reporting)
|
||||||
|
IDR inhibit program dropping of units
|
||||||
|
ADR execute autodrop code
|
||||||
|
LOT loop on test
|
||||||
|
EVL execute evaluation (on diagnostics which have
|
||||||
|
evaluation support)
|
||||||
|
|
||||||
|
|
||||||
|
UPD1 Commands
|
||||||
|
-------------
|
||||||
|
CLR clear UPD1 program buffer
|
||||||
|
LOAD load a program
|
||||||
|
MOD modify file image in memory
|
||||||
|
XFR set transfer address
|
||||||
|
HICORE set upper memory limit for dump
|
||||||
|
LOCORE set lower memory limit for dump
|
||||||
|
DUMP dump a program image
|
||||||
|
DEL delete a file
|
||||||
|
BOOT bootstrap a device
|
||||||
|
|
||||||
|
|
||||||
|
UPD2 Commands
|
||||||
|
-------------
|
||||||
|
File Manipulation
|
||||||
|
-----------------
|
||||||
|
DIR give directory of specified medium
|
||||||
|
PIP transfer a file or files
|
||||||
|
FILE transfer a file or files
|
||||||
|
DEL delete a file or files
|
||||||
|
REN rename a file
|
||||||
|
|
||||||
|
File Modification
|
||||||
|
-----------------
|
||||||
|
CLR clear UPD2 program buffer
|
||||||
|
LOAD load a program
|
||||||
|
MOD modify file image in memory
|
||||||
|
XFR set transfer address
|
||||||
|
HICORE set upper memory limit for dump
|
||||||
|
LOCORE set lower memory limit for dump
|
||||||
|
DUMP dump a program image
|
||||||
|
|
||||||
|
New Medium Creation
|
||||||
|
-------------------
|
||||||
|
ZERO initialize a medium
|
||||||
|
SAVM save a monitor on a disk
|
||||||
|
SAVE save a monitor on a tape
|
||||||
|
COPY copy entire medium
|
||||||
|
|
||||||
|
Miscellaneous
|
||||||
|
-------------
|
||||||
|
ASG assign a logical name to a device
|
||||||
|
DO execute an indirect command file
|
||||||
|
READ read a file to check validity
|
||||||
|
EOT write end-of-tape mark
|
||||||
|
DRIVER load a device driver
|
||||||
|
|
||||||
|
Returning to Monitor
|
||||||
|
--------------------
|
||||||
|
BOOT bootstrap a device
|
||||||
|
EXIT return control to the runtime monitor
|
||||||
|
|
||||||
|
Printing
|
||||||
|
--------
|
||||||
|
PRINT print a file on the line printer
|
||||||
|
TYPE type a file on the console terminal
|
||||||
|
|
||||||
|
|
||||||
|
PATCH Commands
|
||||||
|
--------------
|
||||||
|
BOOT Boot specified device
|
||||||
|
CLEAR Clear input table
|
||||||
|
EXIT Return to XXDP+ monitor
|
||||||
|
GETM Load DEC/X11 MAP file
|
||||||
|
GETP Load saved input table
|
||||||
|
KILL Delete address from input table
|
||||||
|
MOD Enter address in input table
|
||||||
|
PATCH Crreate patched file
|
||||||
|
SAVP Save input table
|
||||||
|
TYPE Print input table on terminal
|
||||||
|
|
||||||
|
|
||||||
|
XTECO Non-edit Commands
|
||||||
|
-----------------------
|
||||||
|
TEXT - create new text file
|
||||||
|
TECO - modify a file on disk
|
||||||
|
EDIT - modify a file
|
||||||
|
TYPE - type a file on the console terminal
|
||||||
|
PRINT - print a file on the line printer
|
||||||
|
DIR - list directory of specified medium
|
||||||
|
EXIT - return to monitor
|
||||||
|
|
||||||
|
|
||||||
|
XTECO Edit Commands
|
||||||
|
-------------------
|
||||||
|
|
||||||
|
Pointer Location
|
||||||
|
----------------
|
||||||
|
L - move the pointer line by line
|
||||||
|
C - move the pointer character by character
|
||||||
|
J - move the pointer to the beginning of text
|
||||||
|
ZJ - move the pointer to the end of text
|
||||||
|
|
||||||
|
Search
|
||||||
|
------
|
||||||
|
S - search for specified string in text now in memory
|
||||||
|
N - search for specified string in remainder of text file
|
||||||
|
|
||||||
|
Modify/Display Text
|
||||||
|
-------------------
|
||||||
|
T - type text
|
||||||
|
D - delete character(s)
|
||||||
|
K - delete line(s)
|
||||||
|
I - insert text
|
||||||
|
A - append text to that currently in memory
|
||||||
|
|
||||||
|
Terminating Edit Mode
|
||||||
|
---------------------
|
||||||
|
EX - exit edit mode
|
||||||
|
<FF>
|
||||||
|
|
||||||
Loading…
Reference in a new issue