Retro/pcjs
Watch
1
0
Fork
You've already forked pcjs
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Added more information about available DEC diagnostics

Browse source
This commit is contained in:
Jeff 2016-11-19 10:14:49 -08:00 • committed by Jeff Parsons
commit 29740f2d7e
5 changed files with 131 additions and 49 deletions
Download patch file Download diff file Expand all files Collapse all files

96
disks/dec/rl02k/xxdp/README.md
View file

@ -1,41 +1,50 @@
---
layout: page
title: "DEC RL02K Disk Images: XXDP+"
title: "XXDP+ Diagnostics Disk"
permalink: /disks/dec/rl02k/xxdp/
---
DEC RL02K Disk Images: XXDP+
----------------------------
XXDP+ Diagnostics Disk
----------------------
To boot the "XXDP+ Diagnostics" disk, start a [PDP-11/70](devices/pdp11/machine/1170/panel/debugger/) and select
the "XXDP+ Diagnostics" disk from the "Disk Drive Controls", click "Load", and wait for the message:
The XXDP+ Diagnostics disk described below contains a wealth of PDP-11 tests. Tests that PDPjs has exercised
include:
- [EKBEE1: 11/70 MEMORY MANAGEMENT DIAGNOSTIC](ekbee1/)
Running XXDP+ Diagnostics
-------------------------
To boot the "XXDP+ Diagnostics" disk, start a [PDP-11/70](devices/pdp11/machine/1170/panel/debugger/) with an
[RL11 Disk Controller](/devices/pdp11/rl11/), select the "XXDP+ Diagnostics" disk from the "Disk Drive Controls",
click "Load", and wait for the message:
Mounted disk "XXDP+ Diagnostics" in drive RL0
Then start the machine (click "Run") and make sure the following prompt has been displayed:
PDP-11 MONITOR V1.0
BOOT>
BOOT>
At the prompt, type "BOOT RL0". The following text should appear:
CHMDLD0 XXDP+ DL MONITOR
BOOTED VIA UNIT 0
28K UNIBUS SYSTEM
ENTER DATE (DD-MMM-YY):
ENTER DATE (DD-MMM-YY):
RESTART ADDR: 152010
THIS IS XXDP+. TYPE "H" OR "H/L" FOR HELP.
.
The "H" (HELP) command displays the following information:
Monitor Commands
----------------
R run a program
L load a program
S start a program
@ -44,8 +53,8 @@ The "H" (HELP) command displays the following information:
F set the terminal fill count
E enable alternate system device
H type help information
DRS Commands
------------
Execution
@ -55,27 +64,27 @@ The "H" (HELP) command displays the following information:
CONTINUE continue diagnostic at test that was
interrupted by a ^C
PROCEED continue from an error halt
Units Under Test
----------------
ADD activate a unit for testing
DROP deactivate a unit
DISPLAY print a list of device information
Flags
-----
FLAGS print status of all flags
ZFLAGS reset all flags
Statistics
----------
PRINT print statistical information
Exitting
--------
EXIT return to XXDP+ runtime monitor
DRS Command Switches
--------------------
/TESTS:test-list execute only the tests specified
@ -84,11 +93,11 @@ The "H" (HELP) command displays the following information:
/EOP:ddddd report end-of-pass after each ddddd passes
(ddddd = 1 to 64000)
/UNITS:unit-list command will affect only specified units
DRS Flags
---------
Flag Effect
---- ------
HOE halt on error - control is returned to runtime
@ -112,8 +121,8 @@ The "H" (HELP) command displays the following information:
LOT loop on test
EVL execute evaluation (on diagnostics which have
evaluation support)
UPD1 Commands
-------------
CLR clear UPD1 program buffer
@ -125,8 +134,8 @@ The "H" (HELP) command displays the following information:
DUMP dump a program image
DEL delete a file
BOOT bootstrap a device
UPD2 Commands
-------------
File Manipulation
@ -136,7 +145,7 @@ The "H" (HELP) command displays the following information:
FILE transfer a file or files
DEL delete a file or files
REN rename a file
File Modification
-----------------
CLR clear UPD2 program buffer
@ -146,14 +155,14 @@ The "H" (HELP) command displays the following information:
HICORE set upper memory limit for dump
LOCORE set lower memory limit for dump
DUMP dump a program image
New Medium Creation
-------------------
ZERO initialize a medium
SAVM save a monitor on a disk
SAVE save a monitor on a tape
COPY copy entire medium
Miscellaneous
-------------
ASG assign a logical name to a device
@ -161,18 +170,18 @@ The "H" (HELP) command displays the following information:
READ read a file to check validity
EOT write end-of-tape mark
DRIVER load a device driver
Returning to Monitor
--------------------
BOOT bootstrap a device
EXIT return control to the runtime monitor
Printing
--------
PRINT print a file on the line printer
TYPE type a file on the console terminal
PATCH Commands
--------------
BOOT Boot specified device
@ -185,8 +194,8 @@ The "H" (HELP) command displays the following information:
PATCH Crreate patched file
SAVP Save input table
TYPE Print input table on terminal
XTECO Non-edit Commands
-----------------------
TEXT - create new text file
@ -196,23 +205,23 @@ The "H" (HELP) command displays the following information:
PRINT - print a file on the line printer
DIR - list directory of specified medium
EXIT - return to monitor
XTECO Edit Commands
-------------------
Pointer Location
----------------
L - move the pointer line by line
C - move the pointer character by character
J - move the pointer to the beginning of text
ZJ - move the pointer to the end of text
Search
------
S - search for specified string in text now in memory
N - search for specified string in remainder of text file
Modify/Display Text
-------------------
T - type text
@ -220,7 +229,7 @@ The "H" (HELP) command displays the following information:
K - delete line(s)
I - insert text
A - append text to that currently in memory
Terminating Edit Mode
---------------------
EX - exit edit mode
@ -229,7 +238,7 @@ The "H" (HELP) command displays the following information:
The "D" (DIRECTORY) command displays the following information:
ENTRY# FILNAM.EXT DATE LENGTH START
1 MMDP .SAV 3-MAR-83C 17 000310
2 MTDP .SAV 3-MAR-83C 17 000331
3 HSAAD0.SYS 3-MAR-83 24 000352
@ -1180,4 +1189,3 @@ The "D" (DIRECTORY) command displays the following information:
948 DXDPU .CMD 25-MAR-82 1 037331
949 SXDP26.BAK 25-MAR-82 1 037332
950 SXDP27.BAK 25-MAR-82 1 037333