Retro/pcjs
Watch
1
0
Fork
You've already forked pcjs
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Ongoing problems with tabs in README markdown files

Browse source
This commit is contained in:
Jeff Parsons 2016-11-26 14:05:53 -08:00 • committed by Jeff Parsons
commit 1e72c6a822
5 changed files with 114 additions and 115 deletions
Download patch file Download diff file Expand all files Collapse all files

72
disks/dec/rl02k/xxdp/README.md
View file

@ -18,7 +18,7 @@ available for drive "RL0", click **Load**, and wait for the message:
Then start the machine (click **Run**) and make sure the following prompt has been displayed:
PDP-11 MONITOR V1.0
BOOT>
At the prompt, type "BOOT RL0". The following text should appear:
@ -26,12 +26,12 @@ At the prompt, type "BOOT RL0". The following text should appear:
CHMDLD0 XXDP+ DL MONITOR
BOOTED VIA UNIT 0
28K UNIBUS SYSTEM
ENTER DATE (DD-MMM-YY):
RESTART ADDR: 152010
THIS IS XXDP+. TYPE "H" OR "H/L" FOR HELP.
.
NOTE: Any RL11 disk drive (RL0-RL3) can be used. RL0 was selected for demonstration purposes.
@ -50,7 +50,7 @@ The "H" (HELP) command displays the following information:
Monitor Commands
----------------
R run a program
L load a program
S start a program
@ -59,8 +59,8 @@ The "H" (HELP) command displays the following information:
F set the terminal fill count
E enable alternate system device
H type help information
DRS Commands
------------
Execution
@ -70,27 +70,27 @@ The "H" (HELP) command displays the following information:
CONTINUE continue diagnostic at test that was
interrupted by a ^C
PROCEED continue from an error halt
Units Under Test
----------------
ADD activate a unit for testing
DROP deactivate a unit
DISPLAY print a list of device information
Flags
-----
FLAGS print status of all flags
ZFLAGS reset all flags
Statistics
----------
PRINT print statistical information
Exitting
--------
EXIT return to XXDP+ runtime monitor
DRS Command Switches
--------------------
/TESTS:test-list execute only the tests specified
@ -99,11 +99,11 @@ The "H" (HELP) command displays the following information:
/EOP:ddddd report end-of-pass after each ddddd passes
(ddddd = 1 to 64000)
/UNITS:unit-list command will affect only specified units
DRS Flags
---------
Flag Effect
---- ------
HOE halt on error - control is returned to runtime
@ -127,8 +127,8 @@ The "H" (HELP) command displays the following information:
LOT loop on test
EVL execute evaluation (on diagnostics which have
evaluation support)
UPD1 Commands
-------------
CLR clear UPD1 program buffer
@ -140,8 +140,8 @@ The "H" (HELP) command displays the following information:
DUMP dump a program image
DEL delete a file
BOOT bootstrap a device
UPD2 Commands
-------------
File Manipulation
@ -151,7 +151,7 @@ The "H" (HELP) command displays the following information:
FILE transfer a file or files
DEL delete a file or files
REN rename a file
File Modification
-----------------
CLR clear UPD2 program buffer
@ -161,14 +161,14 @@ The "H" (HELP) command displays the following information:
HICORE set upper memory limit for dump
LOCORE set lower memory limit for dump
DUMP dump a program image
New Medium Creation
-------------------
ZERO initialize a medium
SAVM save a monitor on a disk
SAVE save a monitor on a tape
COPY copy entire medium
Miscellaneous
-------------
ASG assign a logical name to a device
@ -176,18 +176,18 @@ The "H" (HELP) command displays the following information:
READ read a file to check validity
EOT write end-of-tape mark
DRIVER load a device driver
Returning to Monitor
--------------------
BOOT bootstrap a device
EXIT return control to the runtime monitor
Printing
--------
PRINT print a file on the line printer
TYPE type a file on the console terminal
PATCH Commands
--------------
BOOT Boot specified device
@ -200,8 +200,8 @@ The "H" (HELP) command displays the following information:
PATCH Crreate patched file
SAVP Save input table
TYPE Print input table on terminal
XTECO Non-edit Commands
-----------------------
TEXT - create new text file
@ -211,23 +211,23 @@ The "H" (HELP) command displays the following information:
PRINT - print a file on the line printer
DIR - list directory of specified medium
EXIT - return to monitor
XTECO Edit Commands
-------------------
Pointer Location
----------------
L - move the pointer line by line
C - move the pointer character by character
J - move the pointer to the beginning of text
ZJ - move the pointer to the end of text
Search
------
S - search for specified string in text now in memory
N - search for specified string in remainder of text file
Modify/Display Text
-------------------
T - type text
@ -235,7 +235,7 @@ The "H" (HELP) command displays the following information:
K - delete line(s)
I - insert text
A - append text to that currently in memory
Terminating Edit Mode
---------------------
EX - exit edit mode
@ -246,7 +246,7 @@ The "H" (HELP) command displays the following information:
The "D" (DIRECTORY) command displays the following information:
ENTRY# FILNAM.EXT DATE LENGTH START
1 MMDP .SAV 3-MAR-83C 17 000310
2 MTDP .SAV 3-MAR-83C 17 000331
3 HSAAD0.SYS 3-MAR-83 24 000352