Retro/pcjs
Watch
1
0
Fork
You've already forked pcjs
 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Ongoing problems with tabs in README markdown files

Browse source
This commit is contained in:
Jeff Parsons 2016-11-26 14:05:53 -08:00 • committed by Jeff Parsons
commit 1e72c6a822
5 changed files with 114 additions and 115 deletions
Download patch file Download diff file Expand all files Collapse all files

2
disks/dec/rk03/xxdp/README.md
View file

@ -50,7 +50,7 @@ Refer to [Help](/disks/dec/rl02k/xxdp/#help) from the RL02K version.
The "D" (DIRECTORY) command displays the following information:
ENTRY# FILNAM.EXT DATE LENGTH START
1 HDDKB0.SYS 2-JAN-70 2 000112
2 HMDKB1.SYS 2-JAN-70 17 000113
3 HDDKB1.SYS 2-JAN-70 2 000114

72
disks/dec/rl02k/xxdp/README.md
View file

@ -18,7 +18,7 @@ available for drive "RL0", click **Load**, and wait for the message:
Then start the machine (click **Run**) and make sure the following prompt has been displayed:
PDP-11 MONITOR V1.0
BOOT>
At the prompt, type "BOOT RL0". The following text should appear:
@ -26,12 +26,12 @@ At the prompt, type "BOOT RL0". The following text should appear:
CHMDLD0 XXDP+ DL MONITOR
BOOTED VIA UNIT 0
28K UNIBUS SYSTEM
ENTER DATE (DD-MMM-YY):
RESTART ADDR: 152010
THIS IS XXDP+. TYPE "H" OR "H/L" FOR HELP.
.
NOTE: Any RL11 disk drive (RL0-RL3) can be used. RL0 was selected for demonstration purposes.
@ -50,7 +50,7 @@ The "H" (HELP) command displays the following information:
Monitor Commands
----------------
R run a program
L load a program
S start a program
@ -59,8 +59,8 @@ The "H" (HELP) command displays the following information:
F set the terminal fill count
E enable alternate system device
H type help information
DRS Commands
------------
Execution
@ -70,27 +70,27 @@ The "H" (HELP) command displays the following information:
CONTINUE continue diagnostic at test that was
interrupted by a ^C
PROCEED continue from an error halt
Units Under Test
----------------
ADD activate a unit for testing
DROP deactivate a unit
DISPLAY print a list of device information
Flags
-----
FLAGS print status of all flags
ZFLAGS reset all flags
Statistics
----------
PRINT print statistical information
Exitting
--------
EXIT return to XXDP+ runtime monitor
DRS Command Switches
--------------------
/TESTS:test-list execute only the tests specified
@ -99,11 +99,11 @@ The "H" (HELP) command displays the following information:
/EOP:ddddd report end-of-pass after each ddddd passes
(ddddd = 1 to 64000)
/UNITS:unit-list command will affect only specified units
DRS Flags
---------
Flag Effect
---- ------
HOE halt on error - control is returned to runtime
@ -127,8 +127,8 @@ The "H" (HELP) command displays the following information:
LOT loop on test
EVL execute evaluation (on diagnostics which have
evaluation support)
UPD1 Commands
-------------
CLR clear UPD1 program buffer
@ -140,8 +140,8 @@ The "H" (HELP) command displays the following information:
DUMP dump a program image
DEL delete a file
BOOT bootstrap a device
UPD2 Commands
-------------
File Manipulation
@ -151,7 +151,7 @@ The "H" (HELP) command displays the following information:
FILE transfer a file or files
DEL delete a file or files
REN rename a file
File Modification
-----------------
CLR clear UPD2 program buffer
@ -161,14 +161,14 @@ The "H" (HELP) command displays the following information:
HICORE set upper memory limit for dump
LOCORE set lower memory limit for dump
DUMP dump a program image
New Medium Creation
-------------------
ZERO initialize a medium
SAVM save a monitor on a disk
SAVE save a monitor on a tape
COPY copy entire medium
Miscellaneous
-------------
ASG assign a logical name to a device
@ -176,18 +176,18 @@ The "H" (HELP) command displays the following information:
READ read a file to check validity
EOT write end-of-tape mark
DRIVER load a device driver
Returning to Monitor
--------------------
BOOT bootstrap a device
EXIT return control to the runtime monitor
Printing
--------
PRINT print a file on the line printer
TYPE type a file on the console terminal
PATCH Commands
--------------
BOOT Boot specified device
@ -200,8 +200,8 @@ The "H" (HELP) command displays the following information:
PATCH Crreate patched file
SAVP Save input table
TYPE Print input table on terminal
XTECO Non-edit Commands
-----------------------
TEXT - create new text file
@ -211,23 +211,23 @@ The "H" (HELP) command displays the following information:
PRINT - print a file on the line printer
DIR - list directory of specified medium
EXIT - return to monitor
XTECO Edit Commands
-------------------
Pointer Location
----------------
L - move the pointer line by line
C - move the pointer character by character
J - move the pointer to the beginning of text
ZJ - move the pointer to the end of text
Search
------
S - search for specified string in text now in memory
N - search for specified string in remainder of text file
Modify/Display Text
-------------------
T - type text
@ -235,7 +235,7 @@ The "H" (HELP) command displays the following information:
K - delete line(s)
I - insert text
A - append text to that currently in memory
Terminating Edit Mode
---------------------
EX - exit edit mode
@ -246,7 +246,7 @@ The "H" (HELP) command displays the following information:
The "D" (DIRECTORY) command displays the following information:
ENTRY# FILNAM.EXT DATE LENGTH START
1 MMDP .SAV 3-MAR-83C 17 000310
2 MTDP .SAV 3-MAR-83C 17 000331
3 HSAAD0.SYS 3-MAR-83 24 000352

21
disks/dec/rl02k/xxdp/ekbad0/README.md
View file

@ -12,22 +12,22 @@ From the
p. 1-6:
11/70 CPU DIAGNOSTIC PART 1
ABSTRACT:
This diagnostic is the first part of the 11/70 CPU, it designed to detect and
report logic faults in the CPU. Any fault detected in this program causes the
program to "HALT". After this, run the second part of the CPU test, EKBBF0.
This diagnostic is the first part of the 11/70 CPU, it designed to detect and
report logic faults in the CPU. Any fault detected in this program causes the
program to "HALT". After this, run the second part of the CPU test, EKBBF0.
OPERATING PROCEDURES:
Set the switch register by <CONTROL P> (RD console)
CON = xxxxxxWZ
(W = deposit xxxxxx into console switch register)
(R = read and type console switch settings)
(Z = switch console terminal back to program)
(R = read and type console switch settings)
(Z = switch console terminal back to program)
.R EKBAD0
SWITCH SETTINGS
SW15 = 1 halt on error
SW14 = 1 loop on test
@ -51,4 +51,3 @@ on [bitsavers.org](http://bitsavers.trailing-edge.com/pdf/dec/pdp11/microfiche/f
PRODUCT NAME: CEKBAD0 11/70 CPU #1
DATE CREATED: MAY, 1980
MAINTAINER: DIAGNOSTIC ENGINEERING

68
disks/dec/rl02k/xxdp/ekbbf0/README.md
View file

@ -12,21 +12,21 @@ From the
p. 1-7:
11/70 CPU DIAGNOSTIC PART 2
ABSTRACT:
This diagnostic is the second part of the 11/70 CPU, it tests advanced
instructions and miscellaneous logic.
This diagnostic is the second part of the 11/70 CPU, it tests advanced
instructions and miscellaneous logic.
OPERATING PROCEDURES:
Set the switch register by <CONTROL P> (RD console)
CON = xxxxxxWZ
(W = deposit xxxxxx into console switch register)
(R = read and type console switch settings)
(Z = switch console terminal back to program)
(R = read and type console switch settings)
(Z = switch console terminal back to program)
.R EKBBF0
SWITCH SETTINGS
SW15 = 1 halt on error
SW14 = 1 loop on test
@ -144,28 +144,28 @@ The source code listing for TEST 40 matches the code above, and begins at the sa
ERROR 235 ;RED ZONE REFERENCE FAILED TO TRAP
BR 8$
3$: MOV #STACK,SP ;RESET THE SP
MOV #CPUSPUR,@#ERRVEC ;RESTORE LOCATION 4
MOV #CPUSPUR,@#ERRVEC ;RESTORE LOCATION 4
ERROR 237 ;BEN 13 FAILED TO PUP.00
BR 8$
1$: CMP @#0,#6$ ;DID BEN 13 FAIL?
BEQ 7$ ;BRANCH IF NO
MOV #STACK,SP ;RESET THE SP
MOV #CPUSPUR,@#ERRVEC ;RESTORE ERRVEC
ERROR 240 ;BEN 13 FAILED TO BRK.80
BR 8$
BEQ 7$ ;BRANCH IF NO
MOV #STACK,SP ;RESET THE SP
MOV #CPUSPUR,@#ERRVEC ;RESTORE ERRVEC
ERROR 240 ;BEN 13 FAILED TO BRK.80
BR 8$
7$: CMP #-1,@#336 ;;DID YEL ZONE OCCUR?
BNE 8$ ;BRANCH IF NO
CLR @#336 ;SETUP FOR LOOPING
ERROR 251 ;YEL ZONE IN RED REGION
BNE 8$ ;BRANCH IF NO
CLR @#336 ;SETUP FOR LOOPING
ERROR 251 ;YEL ZONE IN RED REGION
;
;TEST TO ENSURE PSW REFERENCE VIA THE SP CAUSES A RED ZONE TRAP
8$: MOV #63$,$LPERR ;SETUP ERROR LOOP
63$: MOV #4$,@#ERRVEC ;SETUP ERRVEC
MOV #PSW,SP ;PUT ADDRESS OF PSW IN SP
CLR (SP) ;EXECUTE THE TRAP CAUSING INSTRUCTION
MOV #1076,SP ;RESET THE SP
MOV #CPUSPUR,@#ERRVEC ;RESTORE ERRVEC
ERROR 241 ;NO RED ZONE ON STACK OVERFLOW
MOV #PSW,SP ;PUT ADDRESS OF PSW IN SP
CLR (SP) ;EXECUTE THE TRAP CAUSING INSTRUCTION
MOV #1076,SP ;RESET THE SP
MOV #CPUSPUR,@#ERRVEC ;RESTORE ERRVEC
ERROR 241 ;NO RED ZONE ON STACK OVERFLOW
PDPjs was failing to trigger a RED stack violation on this instruction:
@ -189,20 +189,20 @@ and begins at the same address (031532):
;* OCCURS AND NOT THE T BIT TRAP.
;;***************************************************************
TST63: SCOPE
MOV #TST64,NEXTTST ;SAVE ADDRESS OF NEXT TEST
MOV #^D1990,$ICNT ;ADJUST ITTERATION COUNT
MOV #10$,$LPADR ;SETUP LOOP ADR
MOV #TST64,NEXTTST ;SAVE ADDRESS OF NEXT TEST
MOV #^D1990,$ICNT ;ADJUST ITTERATION COUNT
MOV #10$,$LPADR ;SETUP LOOP ADR
10$: MOV #2$,@#TPVEC ;SETUP TELEPRINTER VECTOR
MOV #1$,$LPERR ;SETUP ERROR LOOP
MOV #1$,$LPERR ;SETUP ERROR LOOP
1$: MOV #STACK,SP ;INITIALIZE THE SP
SPL 3
MOV #BIT6,@$TPS ;SET PRINTER INTERRUPT FLAG
MOV #15,@$TPB ;SEND CHARACTER
WAIT ;EXECUTE INSTRUCTION UNDER TEST
SPL 3
MOV #BIT6,@$TPS ;SET PRINTER INTERRUPT FLAG
MOV #15,@$TPB ;SEND CHARACTER
WAIT ;EXECUTE INSTRUCTION UNDER TEST
;FAILURE
CLR @$TPS ;CLEAR INTERR ENABLE BIT
ERROR 377 ;WAIT INSTRUCTION DID NOT
BR 5$ ;WAIT FOR INTERRUPT
CLR @$TPS ;CLEAR INTERR ENABLE BIT
ERROR 377 ;WAIT INSTRUCTION DID NOT
BR 5$ ;WAIT FOR INTERRUPT
After setting and hitting a breakpoint at 031532, we can step through the instructions in this test:

66
disks/dec/rl02k/xxdp/ekbee1/README.md
View file

@ -12,36 +12,36 @@ From the
p. 1-10:
11/70 MEMORY MANAGEMENT TEST
ABSTRACT:
This program was designed using a "BOTTOM UP" approach starting with the smallest segment of MEMORY
MANAGEMENT logic and building up to cover all the logic. The program begins by testing some of the
internal CPU data and address path and address detection logic, then works outward through the MEM.
MANAGEMENT registers. It is assumed that both the CPU and the CACHE have been tested, or are known
to be good.
This program was designed using a "BOTTOM UP" approach starting with the smallest segment of MEMORY
MANAGEMENT logic and building up to cover all the logic. The program begins by testing some of the
internal CPU data and address path and address detection logic, then works outward through the MEM.
MANAGEMENT registers. It is assumed that both the CPU and the CACHE have been tested, or are known
to be good.
OPERATING PROCEDURES:
Set the switch register by <CONTROL P>
CON = xxxxxxWZ
(W = deposit xxxxxx into console switch register)
(R = read and type console switch settings / CON = R)
(Z = switch console terminal back to program)
Set the switch register by <CONTROL P>
CON = xxxxxxWZ
(W = deposit xxxxxx into console switch register)
(R = read and type console switch settings / CON = R)
(Z = switch console terminal back to program)
.R EKBEE1
SWITCH SETTINGS
SW15 = 1 halt on error
SW14 = 1 loop on current test
SW13 = 1 inhibit all error typeouts
SW12 = 1 inhibit trace trapping
SW11 = 1 inhibit iterations
SW10 = 1 ring bell on error
SW09 = 1 loop on error
SW08 = 1 loop on test in SWR <06:00>
SW07 = 1 inhibit multiple error typeouts
SW06 = 1 selects subtest
...
SW15 = 1 halt on error
SW14 = 1 loop on current test
SW13 = 1 inhibit all error typeouts
SW12 = 1 inhibit trace trapping
SW11 = 1 inhibit iterations
SW10 = 1 ring bell on error
SW09 = 1 loop on error
SW08 = 1 loop on test in SWR <06:00>
SW07 = 1 inhibit multiple error typeouts
SW06 = 1 selects subtest
...
The closest we have to a source code listing of the EKBEE1 diagnostic comes from some
[scanned microfiche](http://archive.pcjs.org/pubs/dec/pdp11/diags/AC-7975E-MC_CEKBEE0_1170_MEM_MGMT_May80.pdf)
@ -59,13 +59,13 @@ the PDF (p. 199 of the source code listing):
;*TEST 122 KT BEND
;*
;* THIS TEST ENSURES THAT TMCE KT BEND GOES LOW ON AN ODD
;* ADDRESS ERROR, SL RED, AND NEXM. THIS IS DONE BY EXECUTING
;* AN INSTRUCTION FOR EACH Of THESE THESE CASES THAT ALSO
;* CAUSES A KT ABORT. THE ABORT SHOULD NOT BE HONORED.
;*
;* NOTE: ON A KB11-E OR KB11-EM THE KT ABORT SHOULD BE HONORED OVER A
;* NEXM TRAP. IF THIS IS A KB11-E/EM THEN THIS FEATURE IS TESTED.
;;***************************************************************
;* ADDRESS ERROR, SL RED, AND NEXM. THIS IS DONE BY EXECUTING
;* AN INSTRUCTION FOR EACH Of THESE THESE CASES THAT ALSO
;* CAUSES A KT ABORT. THE ABORT SHOULD NOT BE HONORED.
;*
;* NOTE: ON A KB11-E OR KB11-EM THE KT ABORT SHOULD BE HONORED OVER A
;* NEXM TRAP. IF THIS IS A KB11-E/EM THEN THIS FEATURE IS TESTED.
;;***************************************************************
As noted in the *mapVirtualToPhysical()* function in [cpustate.js](/modules/pdp11/lib/cpustate.js), this test
begins at PC 076060, which is exactly 0100 bytes lower than the address shown in the source code listing (076160).