2122 lines
76 KiB
C
2122 lines
76 KiB
C
/*RPCemu v0.6 by Tom Walker
|
|
IDE emulation*/
|
|
//#define RPCEMU_IDE
|
|
|
|
#define IDE_TIME (5 * 100 * (1 << TIMER_SHIFT))
|
|
|
|
#define _LARGEFILE_SOURCE
|
|
#define _LARGEFILE64_SOURCE
|
|
#define _GNU_SOURCE
|
|
#include <errno.h>
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
|
|
#include <sys/types.h>
|
|
|
|
#ifdef RPCEMU_IDE
|
|
#include "rpcemu.h"
|
|
#include "iomd.h"
|
|
#include "arm.h"
|
|
#else
|
|
#include "ibm.h"
|
|
#include "io.h"
|
|
#include "pic.h"
|
|
#include "timer.h"
|
|
#endif
|
|
#include "ide.h"
|
|
|
|
/* Bits of 'atastat' */
|
|
#define ERR_STAT 0x01
|
|
#define DRQ_STAT 0x08 /* Data request */
|
|
#define DSC_STAT 0x10
|
|
#define SERVICE_STAT 0x10
|
|
#define READY_STAT 0x40
|
|
#define BUSY_STAT 0x80
|
|
|
|
/* Bits of 'error' */
|
|
#define ABRT_ERR 0x04 /* Command aborted */
|
|
#define MCR_ERR 0x08 /* Media change request */
|
|
|
|
/* ATA Commands */
|
|
#define WIN_SRST 0x08 /* ATAPI Device Reset */
|
|
#define WIN_RECAL 0x10
|
|
#define WIN_RESTORE WIN_RECAL
|
|
#define WIN_READ 0x20 /* 28-Bit Read */
|
|
#define WIN_READ_NORETRY 0x21 /* 28-Bit Read - no retry*/
|
|
#define WIN_WRITE 0x30 /* 28-Bit Write */
|
|
#define WIN_WRITE_NORETRY 0x31 /* 28-Bit Write */
|
|
#define WIN_VERIFY 0x40 /* 28-Bit Verify */
|
|
#define WIN_FORMAT 0x50
|
|
#define WIN_SEEK 0x70
|
|
#define WIN_DRIVE_DIAGNOSTICS 0x90 /* Execute Drive Diagnostics */
|
|
#define WIN_SPECIFY 0x91 /* Initialize Drive Parameters */
|
|
#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
|
|
#define WIN_PIDENTIFY 0xA1 /* Identify ATAPI device */
|
|
#define WIN_READ_MULTIPLE 0xC4
|
|
#define WIN_WRITE_MULTIPLE 0xC5
|
|
#define WIN_SET_MULTIPLE_MODE 0xC6
|
|
#define WIN_READ_DMA 0xC8
|
|
#define WIN_WRITE_DMA 0xCA
|
|
#define WIN_SETIDLE1 0xE3
|
|
#define WIN_IDENTIFY 0xEC /* Ask drive to identify itself */
|
|
|
|
/* ATAPI Commands */
|
|
#define GPCMD_INQUIRY 0x12
|
|
#define GPCMD_MODE_SELECT_10 0x55
|
|
#define GPCMD_MODE_SENSE_10 0x5a
|
|
#define GPCMD_PAUSE_RESUME 0x4b
|
|
#define GPCMD_PLAY_AUDIO_12 0xa5
|
|
#define GPCMD_PLAY_AUDIO_MSF 0x47
|
|
#define GPCMD_PREVENT_REMOVAL 0x1e
|
|
#define GPCMD_READ_10 0x28
|
|
#define GPCMD_READ_CD 0xbe
|
|
#define GPCMD_READ_CDROM_CAPACITY 0x25
|
|
#define GPCMD_READ_HEADER 0x44
|
|
#define GPCMD_READ_SUBCHANNEL 0x42
|
|
#define GPCMD_READ_TOC_PMA_ATIP 0x43
|
|
#define GPCMD_REQUEST_SENSE 0x03
|
|
#define GPCMD_SEEK 0x2b
|
|
#define GPCMD_SEND_DVD_STRUCTURE 0xad
|
|
#define GPCMD_SET_SPEED 0xbb
|
|
#define GPCMD_START_STOP_UNIT 0x1b
|
|
#define GPCMD_TEST_UNIT_READY 0x00
|
|
|
|
/* Mode page codes for mode sense/set */
|
|
#define GPMODE_R_W_ERROR_PAGE 0x01
|
|
#define GPMODE_CDROM_PAGE 0x0d
|
|
#define GPMODE_CDROM_AUDIO_PAGE 0x0e
|
|
#define GPMODE_CAPABILITIES_PAGE 0x2a
|
|
#define GPMODE_ALL_PAGES 0x3f
|
|
|
|
/* ATAPI Sense Keys */
|
|
#define SENSE_NONE 0
|
|
#define SENSE_NOT_READY 2
|
|
#define SENSE_ILLEGAL_REQUEST 5
|
|
#define SENSE_UNIT_ATTENTION 6
|
|
|
|
/* ATAPI Additional Sense Codes */
|
|
#define ASC_ILLEGAL_OPCODE 0x20
|
|
#define ASC_MEDIUM_NOT_PRESENT 0x3a
|
|
|
|
/* Tell RISC OS that we have a 4x CD-ROM drive (600kb/sec data, 706kb/sec raw).
|
|
Not that it means anything */
|
|
#define CDROM_SPEED 706
|
|
|
|
/** Evaluate to non-zero if the currently selected drive is an ATAPI device */
|
|
#define IDE_DRIVE_IS_CDROM(ide) (ide->type == IDE_CDROM)
|
|
/*
|
|
\
|
|
(!ide.drive)*/
|
|
|
|
ATAPI *atapi;
|
|
|
|
enum
|
|
{
|
|
IDE_NONE = 0,
|
|
IDE_HDD,
|
|
IDE_CDROM
|
|
};
|
|
|
|
typedef struct IDE
|
|
{
|
|
int type;
|
|
int board;
|
|
uint8_t atastat;
|
|
uint8_t error;
|
|
int secount,sector,cylinder,head,drive,cylprecomp;
|
|
uint8_t command;
|
|
uint8_t fdisk;
|
|
int pos;
|
|
int packlen;
|
|
int spt,hpc;
|
|
int tracks;
|
|
int packetstatus;
|
|
int cdpos,cdlen;
|
|
uint8_t asc;
|
|
int discchanged;
|
|
int reset;
|
|
FILE *hdfile;
|
|
uint16_t buffer[65536];
|
|
int irqstat;
|
|
int service;
|
|
int lba;
|
|
uint32_t lba_addr;
|
|
int skip512;
|
|
int blocksize, blockcount;
|
|
} IDE;
|
|
|
|
IDE ide_drives[4];
|
|
|
|
IDE *ext_ide;
|
|
|
|
char ide_fn[2][512];
|
|
|
|
int (*ide_bus_master_read_sector)(int channel, uint8_t *data);
|
|
int (*ide_bus_master_write_sector)(int channel, uint8_t *data);
|
|
void (*ide_bus_master_set_irq)(int channel);
|
|
|
|
static void callreadcd(IDE *ide);
|
|
static void atapicommand(int ide_board);
|
|
|
|
int idecallback[2] = {0, 0};
|
|
|
|
int cur_ide[2];
|
|
|
|
uint8_t getstat(IDE *ide) { return ide->atastat; }
|
|
|
|
static inline void ide_irq_raise(IDE *ide)
|
|
{
|
|
// pclog("IDE_IRQ_RAISE\n");
|
|
if (!(ide->fdisk&2)) {
|
|
#ifdef RPCEMU_IDE
|
|
iomd.irqb.status |= IOMD_IRQB_IDE;
|
|
updateirqs();
|
|
#else
|
|
// if (ide->board && !ide->irqstat) pclog("IDE_IRQ_RAISE\n");
|
|
picint((ide->board)?(1<<15):(1<<14));
|
|
#endif
|
|
}
|
|
ide->irqstat=1;
|
|
ide->service=1;
|
|
}
|
|
|
|
static inline void ide_irq_lower(IDE *ide)
|
|
{
|
|
// pclog("IDE_IRQ_LOWER\n");
|
|
// if (ide.board == 0) {
|
|
#ifdef RPCEMU_IDE
|
|
iomd.irqb.status &= ~IOMD_IRQB_IDE;
|
|
updateirqs();
|
|
#else
|
|
picintc((ide->board)?(1<<15):(1<<14));
|
|
#endif
|
|
// }
|
|
ide->irqstat=0;
|
|
}
|
|
|
|
void ide_irq_update(IDE *ide)
|
|
{
|
|
#ifdef RPCEMU_IDE
|
|
if (ide->irqstat && !(iomd.irqb.status & IOMD_IRQB_IDE) && !(ide->fdisk & 2)) {
|
|
iomd.irqb.status |= IOMD_IRQB_IDE;
|
|
updateirqs();
|
|
}
|
|
else if (iomd.irqb.status & IOMD_IRQB_IDE)
|
|
{
|
|
iomd.irqb.status &= ~IOMD_IRQB_IDE;
|
|
updateirqs();
|
|
}
|
|
#else
|
|
if (ide->irqstat && !((pic2.pend|pic2.ins)&0x40) && !(ide->fdisk & 2))
|
|
picint((ide->board)?(1<<15):(1<<14));
|
|
else if ((pic2.pend|pic2.ins)&0x40)
|
|
picintc((ide->board)?(1<<15):(1<<14));
|
|
#endif
|
|
}
|
|
/**
|
|
* Copy a string into a buffer, padding with spaces, and placing characters as
|
|
* if they were packed into 16-bit values, stored little-endian.
|
|
*
|
|
* @param str Destination buffer
|
|
* @param src Source string
|
|
* @param len Length of destination buffer to fill in. Strings shorter than
|
|
* this length will be padded with spaces.
|
|
*/
|
|
static void
|
|
ide_padstr(char *str, const char *src, int len)
|
|
{
|
|
int i, v;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (*src != '\0') {
|
|
v = *src++;
|
|
} else {
|
|
v = ' ';
|
|
}
|
|
str[i ^ 1] = v;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Copy a string into a buffer, padding with spaces. Does not add string
|
|
* terminator.
|
|
*
|
|
* @param buf Destination buffer
|
|
* @param buf_size Size of destination buffer to fill in. Strings shorter than
|
|
* this length will be padded with spaces.
|
|
* @param src Source string
|
|
*/
|
|
static void
|
|
ide_padstr8(uint8_t *buf, int buf_size, const char *src)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < buf_size; i++) {
|
|
if (*src != '\0') {
|
|
buf[i] = *src++;
|
|
} else {
|
|
buf[i] = ' ';
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Fill in ide->buffer with the output of the "IDENTIFY DEVICE" command
|
|
*/
|
|
static void ide_identify(IDE *ide)
|
|
{
|
|
memset(ide->buffer, 0, 512);
|
|
|
|
//ide->buffer[1] = 101; /* Cylinders */
|
|
|
|
#ifdef RPCEMU_IDE
|
|
ide->buffer[1] = 65535; /* Cylinders */
|
|
ide->buffer[3] = 16; /* Heads */
|
|
ide->buffer[6] = 63; /* Sectors */
|
|
#else
|
|
ide->buffer[1] = hdc[cur_ide[0]].tracks; /* Cylinders */
|
|
ide->buffer[3] = hdc[cur_ide[0]].hpc; /* Heads */
|
|
ide->buffer[6] = hdc[cur_ide[0]].spt; /* Sectors */
|
|
#endif
|
|
ide_padstr((char *) (ide->buffer + 10), "", 20); /* Serial Number */
|
|
ide_padstr((char *) (ide->buffer + 23), "v1.0", 8); /* Firmware */
|
|
#ifdef RPCEMU_IDE
|
|
ide_padstr((char *) (ide->buffer + 27), "RPCemuHD", 40); /* Model */
|
|
#else
|
|
ide_padstr((char *) (ide->buffer + 27), "PCemHD", 40); /* Model */
|
|
#endif
|
|
ide->buffer[20] = 3; /*Buffer type*/
|
|
ide->buffer[21] = 512; /*Buffer size*/
|
|
ide->buffer[47] = 16; /*Max sectors on multiple transfer command*/
|
|
ide->buffer[48] = 1; /*Dword transfers supported*/
|
|
ide->buffer[49] = (1 << 9) | (1 << 8); /* LBA and DMA supported */
|
|
ide->buffer[50] = 0x4000; /* Capabilities */
|
|
ide->buffer[51] = 2 << 8; /*PIO timing mode*/
|
|
ide->buffer[52] = 2 << 8; /*DMA timing mode*/
|
|
ide->buffer[59] = ide->blocksize ? (ide->blocksize | 0x100) : 0;
|
|
#ifdef RPCEMU_IDE
|
|
ide->buffer[60] = (65535 * 16 * 63) & 0xFFFF; /* Total addressable sectors (LBA) */
|
|
ide->buffer[61] = (65535 * 16 * 63) >> 16;
|
|
#else
|
|
ide->buffer[60] = (hdc[cur_ide[0]].tracks * hdc[cur_ide[0]].hpc * hdc[cur_ide[0]].spt) & 0xFFFF; /* Total addressable sectors (LBA) */
|
|
ide->buffer[61] = (hdc[cur_ide[0]].tracks * hdc[cur_ide[0]].hpc * hdc[cur_ide[0]].spt) >> 16;
|
|
#endif
|
|
ide->buffer[63] = 7; /*Multiword DMA*/
|
|
ide->buffer[80] = 0xe; /*ATA-1 to ATA-3 supported*/
|
|
}
|
|
|
|
/**
|
|
* Fill in ide->buffer with the output of the "IDENTIFY PACKET DEVICE" command
|
|
*/
|
|
static void ide_atapi_identify(IDE *ide)
|
|
{
|
|
memset(ide->buffer, 0, 512);
|
|
|
|
ide->buffer[0] = 0x8000 | (5<<8) | 0x80 | (2<<5); /* ATAPI device, CD-ROM drive, removable media, accelerated DRQ */
|
|
ide_padstr((char *) (ide->buffer + 10), "", 20); /* Serial Number */
|
|
ide_padstr((char *) (ide->buffer + 23), "v1.0", 8); /* Firmware */
|
|
#ifdef RPCEMU_IDE
|
|
ide_padstr((char *) (ide->buffer + 27), "RPCemuCD", 40); /* Model */
|
|
#else
|
|
ide_padstr((char *) (ide->buffer + 27), "PCemCD", 40); /* Model */
|
|
#endif
|
|
ide->buffer[49] = 0x200; /* LBA supported */
|
|
}
|
|
|
|
/**
|
|
* Fill in ide->buffer with the output of the ATAPI "MODE SENSE" command
|
|
*
|
|
* @param pos Offset within the buffer to start filling in data
|
|
*
|
|
* @return Offset within the buffer after the end of the data
|
|
*/
|
|
static uint32_t ide_atapi_mode_sense(IDE *ide, uint32_t pos, uint8_t type)
|
|
{
|
|
uint8_t *buf = (uint8_t *) ide->buffer;
|
|
// pclog("ide_atapi_mode_sense %02X\n",type);
|
|
if (type==GPMODE_ALL_PAGES || type==GPMODE_R_W_ERROR_PAGE)
|
|
{
|
|
/* &01 - Read error recovery */
|
|
buf[pos++] = GPMODE_R_W_ERROR_PAGE;
|
|
buf[pos++] = 6; /* Page length */
|
|
buf[pos++] = 0; /* Error recovery parameters */
|
|
buf[pos++] = 3; /* Read retry count */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
}
|
|
|
|
if (type==GPMODE_ALL_PAGES || type==GPMODE_CDROM_PAGE)
|
|
{
|
|
/* &0D - CD-ROM Parameters */
|
|
buf[pos++] = GPMODE_CDROM_PAGE;
|
|
buf[pos++] = 6; /* Page length */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 1; /* Inactivity time multiplier *NEEDED BY RISCOS* value is a guess */
|
|
buf[pos++] = 0; buf[pos++] = 60; /* MSF settings */
|
|
buf[pos++] = 0; buf[pos++] = 75; /* MSF settings */
|
|
}
|
|
|
|
if (type==GPMODE_ALL_PAGES || type==GPMODE_CDROM_AUDIO_PAGE)
|
|
{
|
|
/* &0e - CD-ROM Audio Control Parameters */
|
|
buf[pos++] = GPMODE_CDROM_AUDIO_PAGE;
|
|
buf[pos++] = 0xE; /* Page length */
|
|
buf[pos++] = 4; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; buf[pos++] = 75; /* Logical audio block per second */
|
|
buf[pos++] = 1; /* CDDA Output Port 0 Channel Selection */
|
|
buf[pos++] = 0xFF; /* CDDA Output Port 0 Volume */
|
|
buf[pos++] = 2; /* CDDA Output Port 1 Channel Selection */
|
|
buf[pos++] = 0xFF; /* CDDA Output Port 1 Volume */
|
|
buf[pos++] = 0; /* CDDA Output Port 2 Channel Selection */
|
|
buf[pos++] = 0; /* CDDA Output Port 2 Volume */
|
|
buf[pos++] = 0; /* CDDA Output Port 3 Channel Selection */
|
|
buf[pos++] = 0; /* CDDA Output Port 3 Volume */
|
|
}
|
|
|
|
if (type==GPMODE_ALL_PAGES || type==GPMODE_CAPABILITIES_PAGE)
|
|
{
|
|
// pclog("Capabilities page\n");
|
|
/* &2A - CD-ROM capabilities and mechanical status */
|
|
buf[pos++] = GPMODE_CAPABILITIES_PAGE;
|
|
buf[pos++] = 0x12; /* Page length */
|
|
buf[pos++] = 0; buf[pos++] = 0; /* CD-R methods */
|
|
buf[pos++] = 1; /* Supports audio play, not multisession */
|
|
buf[pos++] = 0; /* Some other stuff not supported */
|
|
buf[pos++] = 0; /* Some other stuff not supported (lock state + eject) */
|
|
buf[pos++] = 0; /* Some other stuff not supported */
|
|
buf[pos++] = (uint8_t) (CDROM_SPEED >> 8);
|
|
buf[pos++] = (uint8_t) CDROM_SPEED; /* Maximum speed */
|
|
buf[pos++] = 0; buf[pos++] = 2; /* Number of audio levels - on and off only */
|
|
buf[pos++] = 0; buf[pos++] = 0; /* Buffer size - none */
|
|
buf[pos++] = (uint8_t) (CDROM_SPEED >> 8);
|
|
buf[pos++] = (uint8_t) CDROM_SPEED; /* Current speed */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Drive digital format */
|
|
buf[pos++] = 0; /* Reserved */
|
|
buf[pos++] = 0; /* Reserved */
|
|
}
|
|
|
|
return pos;
|
|
}
|
|
|
|
/*
|
|
* Return the sector offset for the current register values
|
|
*/
|
|
static off64_t ide_get_sector(IDE *ide)
|
|
{
|
|
if (ide->lba)
|
|
{
|
|
return (off64_t)ide->lba_addr + ide->skip512;
|
|
}
|
|
else
|
|
{
|
|
int heads = ide->hpc;
|
|
int sectors = ide->spt;
|
|
|
|
return ((((off64_t) ide->cylinder * heads) + ide->head) *
|
|
sectors) + (ide->sector - 1) + ide->skip512;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Move to the next sector using CHS addressing
|
|
*/
|
|
static void ide_next_sector(IDE *ide)
|
|
{
|
|
if (ide->lba)
|
|
{
|
|
ide->lba_addr++;
|
|
}
|
|
else
|
|
{
|
|
ide->sector++;
|
|
if (ide->sector == (ide->spt + 1)) {
|
|
ide->sector = 1;
|
|
ide->head++;
|
|
if (ide->head == ide->hpc) {
|
|
ide->head = 0;
|
|
ide->cylinder++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef RPCEMU_IDE
|
|
static void loadhd(IDE *ide, int d, const char *fn)
|
|
{
|
|
char pathname[512];
|
|
|
|
append_filename(pathname, rpcemu_get_datadir(), fn, 512);
|
|
|
|
rpclog("Loading %s\n",pathname);
|
|
if (ide->hdfile == NULL) {
|
|
/* Try to open existing hard disk image */
|
|
ide->hdfile = fopen64(pathname, "rb+");
|
|
if (ide->hdfile == NULL) {
|
|
/* Failed to open existing hard disk image */
|
|
if (errno == ENOENT) {
|
|
/* Failed because it does not exist,
|
|
so try to create new file */
|
|
ide->hdfile = fopen64(pathname, "wb+");
|
|
if (ide->hdfile == NULL) {
|
|
fatal("Cannot create file '%s': %s",
|
|
pathname, strerror(errno));
|
|
}
|
|
} else {
|
|
/* Failed for another reason */
|
|
fatal("Cannot open file '%s': %s",
|
|
pathname, strerror(errno));
|
|
}
|
|
}
|
|
}
|
|
|
|
fseek(ide->hdfile, 0xfc1, SEEK_SET);
|
|
ide->spt = getc(ide->hdfile);
|
|
ide->hpc = getc(ide->hdfile);
|
|
ide->skip512 = 1;
|
|
// rpclog("First check - spt %i hpc %i\n",ide.spt[0],ide.hpc[0]);
|
|
if (!ide->spt || !ide->hpc)
|
|
{
|
|
fseek(ide->hdfile, 0xdc1, SEEK_SET);
|
|
ide->spt = getc(ide->hdfile);
|
|
ide->hpc = getc(ide->hdfile);
|
|
// rpclog("Second check - spt %i hpc %i\n",ide.spt[0],ide.hpc[0]);
|
|
ide->skip512 = 0;
|
|
if (!ide->spt || !ide->hpc)
|
|
{
|
|
ide->spt=63;
|
|
ide->hpc=16;
|
|
ide->skip512 = 1;
|
|
// rpclog("Final check - spt %i hpc %i\n",ide.spt[0],ide.hpc[0]);
|
|
}
|
|
}
|
|
|
|
ide->type = IDE_HDD;
|
|
|
|
rpclog("%i %i %i\n",ide->spt,ide->hpc,ide->skip512);
|
|
}
|
|
#else
|
|
static void loadhd(IDE *ide, int d, const char *fn)
|
|
{
|
|
if (ide->hdfile == NULL) {
|
|
/* Try to open existing hard disk image */
|
|
ide->hdfile = fopen64(fn, "rb+");
|
|
if (ide->hdfile == NULL) {
|
|
/* Failed to open existing hard disk image */
|
|
if (errno == ENOENT) {
|
|
/* Failed because it does not exist,
|
|
so try to create new file */
|
|
ide->hdfile = fopen64(fn, "wb+");
|
|
if (ide->hdfile == NULL) {
|
|
ide->type = IDE_NONE;
|
|
/* fatal("Cannot create file '%s': %s",
|
|
fn, strerror(errno));*/
|
|
return;
|
|
}
|
|
} else {
|
|
/* Failed for another reason */
|
|
ide->type = IDE_NONE;
|
|
/* fatal("Cannot open file '%s': %s",
|
|
fn, strerror(errno));*/
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
ide->spt = hdc[d].spt;
|
|
ide->hpc = hdc[d].hpc;
|
|
ide->tracks = hdc[d].tracks;
|
|
ide->type = IDE_HDD;
|
|
}
|
|
#endif
|
|
|
|
void resetide(void)
|
|
{
|
|
int d;
|
|
|
|
/* Close hard disk image files (if previously open) */
|
|
for (d = 0; d < 4; d++) {
|
|
ide_drives[d].type = IDE_NONE;
|
|
if (ide_drives[d].hdfile != NULL) {
|
|
fclose(ide_drives[d].hdfile);
|
|
ide_drives[d].hdfile = NULL;
|
|
}
|
|
ide_drives[d].atastat = READY_STAT | DSC_STAT;
|
|
ide_drives[d].service = 0;
|
|
ide_drives[d].board = (d & 2) ? 1 : 0;
|
|
}
|
|
|
|
idecallback[0]=idecallback[1]=0;
|
|
#ifdef RPCEMU_IDE
|
|
loadhd(&ide_drives[0], 0, "hd4.hdf");
|
|
if (!config.cdromenabled) {
|
|
loadhd(&ide_drives[1], 1, "hd5.hdf");
|
|
}
|
|
else
|
|
ide_drives[1].type = IDE_CDROM;
|
|
#else
|
|
loadhd(&ide_drives[0], 0, ide_fn[0]);
|
|
loadhd(&ide_drives[1], 1, ide_fn[1]);
|
|
if (cdrom_enabled)
|
|
ide_drives[2].type = IDE_CDROM;
|
|
#endif
|
|
|
|
cur_ide[0] = 0;
|
|
cur_ide[1] = 2;
|
|
|
|
// ide_drives[1].type = IDE_CDROM;
|
|
}
|
|
|
|
int idetimes=0;
|
|
void writeidew(int ide_board, uint16_t val)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
#ifndef RPCEMU_IDE
|
|
/* if (ide_board && (cr0&1) && !(eflags&VM_FLAG))
|
|
{
|
|
// pclog("Failed write IDE %04X:%08X\n",CS,pc);
|
|
return;
|
|
}*/
|
|
#endif
|
|
#ifdef _RPCEMU_BIG_ENDIAN
|
|
val=(val>>8)|(val<<8);
|
|
#endif
|
|
// pclog("Write IDEw %04X\n",val);
|
|
ide->buffer[ide->pos >> 1] = val;
|
|
ide->pos+=2;
|
|
|
|
if (ide->packetstatus==4)
|
|
{
|
|
if (ide->pos>=(ide->packlen+2))
|
|
{
|
|
ide->packetstatus=5;
|
|
timer_process();
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
timer_update_outstanding();
|
|
// pclog("Packet over!\n");
|
|
ide_irq_lower(ide);
|
|
}
|
|
return;
|
|
}
|
|
else if (ide->packetstatus==5) return;
|
|
else if (ide->command == WIN_PACKETCMD && ide->pos>=0xC)
|
|
{
|
|
ide->pos=0;
|
|
ide->atastat = BUSY_STAT;
|
|
ide->packetstatus=1;
|
|
/* idecallback[ide_board]=6*IDE_TIME;*/
|
|
timer_process();
|
|
callbackide(ide_board);
|
|
timer_update_outstanding();
|
|
// idecallback[ide_board]=60*IDE_TIME;
|
|
// if ((ide->buffer[0]&0xFF)==0x43) idecallback[ide_board]=1*IDE_TIME;
|
|
// pclog("Packet now waiting!\n");
|
|
/* if (ide->buffer[0]==0x243)
|
|
{
|
|
idetimes++;
|
|
output=3;
|
|
}*/
|
|
}
|
|
else if (ide->pos>=512)
|
|
{
|
|
ide->pos=0;
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
if (ide->command == WIN_WRITE_MULTIPLE)
|
|
callbackide(ide_board);
|
|
else
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
timer_update_outstanding();
|
|
}
|
|
}
|
|
|
|
void writeidel(int ide_board, uint32_t val)
|
|
{
|
|
// pclog("WriteIDEl %08X\n", val);
|
|
writeidew(ide_board, val);
|
|
writeidew(ide_board, val >> 16);
|
|
}
|
|
|
|
void writeide(int ide_board, uint16_t addr, uint8_t val)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
IDE *ide_other = &ide_drives[cur_ide[ide_board] ^ 1];
|
|
#ifndef RPCEMU_IDE
|
|
/* if (ide_board && (cr0&1) && !(eflags&VM_FLAG))
|
|
{
|
|
// pclog("Failed write IDE %04X:%08X\n",CS,pc);
|
|
return;
|
|
}*/
|
|
#endif
|
|
// if ((cr0&1) && !(eflags&VM_FLAG))
|
|
// pclog("WriteIDE %04X %02X from %04X(%08X):%08X %i\n", addr, val, CS, cs, pc, ins);
|
|
// return;
|
|
addr|=0x80;
|
|
// if (ide_board) pclog("Write IDEb %04X %02X %04X(%08X):%04X %i %02X %02X\n",addr,val,CS,cs,pc,ins,ide->atastat,ide_drives[0].atastat);
|
|
/*if (idedebug) */
|
|
// pclog("Write IDE %08X %02X %04X:%08X\n",addr,val,CS,pc);
|
|
// int c;
|
|
// rpclog("Write IDE %08X %02X %08X %08X\n",addr,val,PC,armregs[12]);
|
|
|
|
if (ide->type == IDE_NONE && addr != 0x1f6) return;
|
|
|
|
switch (addr)
|
|
{
|
|
case 0x1F0: /* Data */
|
|
writeidew(ide_board, val | (val << 8));
|
|
return;
|
|
|
|
case 0x1F1: /* Features */
|
|
ide->cylprecomp = val;
|
|
ide_other->cylprecomp = val;
|
|
return;
|
|
|
|
case 0x1F2: /* Sector count */
|
|
ide->secount = val;
|
|
ide_other->secount = val;
|
|
return;
|
|
|
|
case 0x1F3: /* Sector */
|
|
ide->sector = val;
|
|
ide->lba_addr = (ide->lba_addr & 0xFFFFF00) | val;
|
|
ide_other->sector = val;
|
|
ide_other->lba_addr = (ide_other->lba_addr & 0xFFFFF00) | val;
|
|
return;
|
|
|
|
case 0x1F4: /* Cylinder low */
|
|
ide->cylinder = (ide->cylinder & 0xFF00) | val;
|
|
ide->lba_addr = (ide->lba_addr & 0xFFF00FF) | (val << 8);
|
|
ide_other->cylinder = (ide_other->cylinder&0xFF00) | val;
|
|
ide_other->lba_addr = (ide_other->lba_addr&0xFFF00FF) | (val << 8);
|
|
// pclog("Write cylinder low %02X\n",val);
|
|
return;
|
|
|
|
case 0x1F5: /* Cylinder high */
|
|
ide->cylinder = (ide->cylinder & 0xFF) | (val << 8);
|
|
ide->lba_addr = (ide->lba_addr & 0xF00FFFF) | (val << 16);
|
|
ide_other->cylinder = (ide_other->cylinder & 0xFF) | (val << 8);
|
|
ide_other->lba_addr = (ide_other->lba_addr & 0xF00FFFF) | (val << 16);
|
|
return;
|
|
|
|
case 0x1F6: /* Drive/Head */
|
|
/* if (val==0xB0)
|
|
{
|
|
dumpregs();
|
|
exit(-1);
|
|
}*/
|
|
|
|
if (cur_ide[ide_board] != ((val>>4)&1)+(ide_board<<1))
|
|
{
|
|
cur_ide[ide_board]=((val>>4)&1)+(ide_board<<1);
|
|
|
|
if (ide->reset)
|
|
{
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide->error=1;
|
|
ide->secount=1;
|
|
ide->sector=1;
|
|
ide->head=0;
|
|
ide->cylinder=0;
|
|
ide->reset = 0;
|
|
idecallback[ide_board] = 0;
|
|
timer_update_outstanding();
|
|
return;
|
|
}
|
|
|
|
ide = &ide_drives[cur_ide[ide_board]];
|
|
}
|
|
|
|
ide->head = val & 0xF;
|
|
ide->lba = val & 0x40;
|
|
ide_other->head = val & 0xF;
|
|
ide_other->lba = val & 0x40;
|
|
|
|
ide->lba_addr = (ide->lba_addr & 0x0FFFFFF) | ((val & 0xF) << 24);
|
|
ide_other->lba_addr = (ide_other->lba_addr & 0x0FFFFFF)|((val & 0xF) << 24);
|
|
|
|
ide_irq_update(ide);
|
|
return;
|
|
|
|
case 0x1F7: /* Command register */
|
|
if (ide->type == IDE_NONE) return;
|
|
// pclog("IDE command %02X drive %i\n",val,ide.drive);
|
|
ide_irq_lower(ide);
|
|
ide->command=val;
|
|
|
|
// pclog("New IDE command - %02X %i %i\n",ide->command,cur_ide[ide_board],ide_board);
|
|
ide->error=0;
|
|
switch (val)
|
|
{
|
|
case WIN_SRST: /* ATAPI Device Reset */
|
|
if (IDE_DRIVE_IS_CDROM(ide)) ide->atastat = BUSY_STAT;
|
|
else ide->atastat = READY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=100*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_RESTORE:
|
|
case WIN_SEEK:
|
|
// pclog("WIN_RESTORE start\n");
|
|
ide->atastat = READY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=100*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_READ_MULTIPLE:
|
|
if (!ide->blocksize)
|
|
fatal("READ_MULTIPLE - blocksize = 0\n");
|
|
#if 0
|
|
if (ide->lba) pclog("Read Multiple %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Read Multiple %i sectors from sector %i cylinder %i head %i %i\n",ide->secount,ide->sector,ide->cylinder,ide->head,ins);
|
|
#endif
|
|
ide->blockcount = 0;
|
|
|
|
case WIN_READ:
|
|
case WIN_READ_NORETRY:
|
|
case WIN_READ_DMA:
|
|
/* if (ide.secount>1)
|
|
{
|
|
fatal("Read %i sectors from sector %i cylinder %i head %i\n",ide.secount,ide.sector,ide.cylinder,ide.head);
|
|
}*/
|
|
#if 0
|
|
if (ide->lba) pclog("Read %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Read %i sectors from sector %i cylinder %i head %i %i\n",ide->secount,ide->sector,ide->cylinder,ide->head,ins);
|
|
#endif
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_WRITE_MULTIPLE:
|
|
if (!ide->blocksize)
|
|
fatal("Write_MULTIPLE - blocksize = 0\n");
|
|
#if 0
|
|
if (ide->lba) pclog("Write Multiple %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Write Multiple %i sectors to sector %i cylinder %i head %i\n",ide->secount,ide->sector,ide->cylinder,ide->head);
|
|
#endif
|
|
ide->blockcount = 0;
|
|
|
|
case WIN_WRITE:
|
|
case WIN_WRITE_NORETRY:
|
|
/* if (ide.secount>1)
|
|
{
|
|
fatal("Write %i sectors to sector %i cylinder %i head %i\n",ide.secount,ide.sector,ide.cylinder,ide.head);
|
|
}*/
|
|
#if 0
|
|
if (ide->lba) pclog("Write %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Write %i sectors to sector %i cylinder %i head %i\n",ide->secount,ide->sector,ide->cylinder,ide->head);
|
|
#endif
|
|
ide->atastat = DRQ_STAT | DSC_STAT | READY_STAT;
|
|
ide->pos=0;
|
|
return;
|
|
|
|
case WIN_WRITE_DMA:
|
|
#if 0
|
|
if (ide->lba) pclog("Write %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Write %i sectors to sector %i cylinder %i head %i\n",ide->secount,ide->sector,ide->cylinder,ide->head);
|
|
#endif
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_VERIFY:
|
|
#if 0
|
|
if (ide->lba) pclog("Read verify %i sectors from LBA addr %07X\n",ide->secount,ide->lba_addr);
|
|
else pclog("Read verify %i sectors from sector %i cylinder %i head %i\n",ide->secount,ide->sector,ide->cylinder,ide->head);
|
|
#endif
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_FORMAT:
|
|
// pclog("Format track %i head %i\n",ide.cylinder,ide.head);
|
|
ide->atastat = DRQ_STAT;
|
|
// idecallback[ide_board]=200;
|
|
ide->pos=0;
|
|
return;
|
|
|
|
case WIN_SPECIFY: /* Initialize Drive Parameters */
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
// pclog("SPECIFY\n");
|
|
// output=1;
|
|
return;
|
|
|
|
case WIN_DRIVE_DIAGNOSTICS: /* Execute Drive Diagnostics */
|
|
case WIN_PIDENTIFY: /* Identify Packet Device */
|
|
case WIN_SET_MULTIPLE_MODE: /*Set Multiple Mode*/
|
|
// output=1;
|
|
case WIN_SETIDLE1: /* Idle */
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
callbackide(ide_board);
|
|
// idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_IDENTIFY: /* Identify Device */
|
|
case 0xEF:
|
|
// output=3;
|
|
// timetolive=500;
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=200*IDE_TIME;
|
|
timer_update_outstanding();
|
|
return;
|
|
|
|
case WIN_PACKETCMD: /* ATAPI Packet */
|
|
ide->packetstatus=0;
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
idecallback[ide_board]=1;//30*IDE_TIME;
|
|
timer_update_outstanding();
|
|
ide->pos=0;
|
|
return;
|
|
|
|
case 0xF0:
|
|
default:
|
|
ide->atastat = READY_STAT | ERR_STAT | DSC_STAT;
|
|
ide->error = ABRT_ERR;
|
|
ide_irq_raise(ide);
|
|
/* fatal("Bad IDE command %02X\n", val);*/
|
|
return;
|
|
}
|
|
|
|
return;
|
|
|
|
case 0x3F6: /* Device control */
|
|
if ((ide->fdisk&4) && !(val&4) && (ide->type != IDE_NONE))
|
|
{
|
|
timer_process();
|
|
idecallback[ide_board]=500*IDE_TIME;
|
|
timer_update_outstanding();
|
|
ide->reset = 1;
|
|
ide->atastat = BUSY_STAT;
|
|
// pclog("IDE Reset\n");
|
|
}
|
|
ide->fdisk=val;
|
|
ide_irq_update(ide);
|
|
return;
|
|
}
|
|
// fatal("Bad IDE write %04X %02X\n", addr, val);
|
|
}
|
|
|
|
uint8_t readide(int ide_board, uint16_t addr)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
uint8_t temp;
|
|
uint16_t tempw;
|
|
|
|
addr|=0x80;
|
|
#ifndef RPCEMU_IDE
|
|
/* if (ide_board && (cr0&1) && !(eflags&VM_FLAG))
|
|
{
|
|
// pclog("Failed read IDE %04X:%08X\n",CS,pc);
|
|
return 0xFF;
|
|
}*/
|
|
#endif
|
|
// if ((cr0&1) && !(eflags&VM_FLAG))
|
|
// pclog("ReadIDE %04X from %04X(%08X):%08X\n", addr, CS, cs, pc);
|
|
// return 0xFF;
|
|
|
|
if (ide->type == IDE_NONE && addr != 0x1f6) return 0;
|
|
// /*if (addr!=0x1F7 && addr!=0x3F6) */pclog("Read IDEb %04X %02X %02X %i %04X:%04X %i %04X\n",addr,ide->atastat,(ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0),cur_ide[ide_board],CS,pc,ide_board, BX);
|
|
//rpclog("Read IDE %08X %08X %02X\n",addr,PC,iomd.irqb.mask);
|
|
switch (addr)
|
|
{
|
|
case 0x1F0: /* Data */
|
|
tempw = readidew(ide_board);
|
|
// pclog("Read IDEW %04X\n", tempw);
|
|
temp = tempw & 0xff;
|
|
break;
|
|
|
|
case 0x1F1: /* Error */
|
|
// pclog("Read error %02X\n",ide.error);
|
|
temp = ide->error;
|
|
break;
|
|
|
|
case 0x1F2: /* Sector count */
|
|
// pclog("Read sector count %02X\n",ide->secount);
|
|
temp = (uint8_t)ide->secount;
|
|
break;
|
|
|
|
case 0x1F3: /* Sector */
|
|
temp = (uint8_t)ide->sector;
|
|
break;
|
|
|
|
case 0x1F4: /* Cylinder low */
|
|
// pclog("Read cyl low %02X\n",ide.cylinder&0xFF);
|
|
temp = (uint8_t)(ide->cylinder&0xFF);
|
|
break;
|
|
|
|
case 0x1F5: /* Cylinder high */
|
|
// pclog("Read cyl low %02X\n",ide.cylinder>>8);
|
|
temp = (uint8_t)(ide->cylinder>>8);
|
|
break;
|
|
|
|
case 0x1F6: /* Drive/Head */
|
|
temp = (uint8_t)(ide->head | ((cur_ide[ide_board] & 1) ? 0x10 : 0) | (ide->lba ? 0x40 : 0) | 0xa0);
|
|
break;
|
|
|
|
case 0x1F7: /* Status */
|
|
if (ide->type == IDE_NONE)
|
|
{
|
|
// pclog("Return status 00\n");
|
|
temp = 0;
|
|
break;
|
|
}
|
|
ide_irq_lower(ide);
|
|
if (ide->fdisk & 4)
|
|
temp = 0x80;
|
|
else if (ide->type == IDE_CDROM)
|
|
{
|
|
// pclog("Read CDROM status %02X\n",(ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0));
|
|
temp = (ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0);
|
|
}
|
|
else
|
|
{
|
|
// && ide->service) return ide.atastat[ide.board]|SERVICE_STAT;
|
|
// pclog("Return status %02X %04X:%04X %02X %02X\n",ide->atastat, CS ,pc, AH, BH);
|
|
temp = ide->atastat;
|
|
}
|
|
break;
|
|
|
|
case 0x3F6: /* Alternate Status */
|
|
// pclog("3F6 read %02X\n",ide.atastat[ide.board]);
|
|
// if (output) output=0;
|
|
if (ide->type == IDE_NONE)
|
|
{
|
|
// pclog("Return status 00\n");
|
|
temp = 0;
|
|
break;
|
|
}
|
|
if (ide->type == IDE_CDROM)
|
|
{
|
|
// pclog("Read CDROM status %02X\n",(ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0));
|
|
temp = (ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0);
|
|
}
|
|
else
|
|
{
|
|
// && ide->service) return ide.atastat[ide.board]|SERVICE_STAT;
|
|
// pclog("Return status %02X\n",ide->atastat);
|
|
temp = ide->atastat;
|
|
}
|
|
break;
|
|
}
|
|
// if (ide_board) pclog("Read IDEb %04X %02X %02X %02X %i %04X:%04X %i\n", addr, temp, ide->atastat,(ide->atastat & ~DSC_STAT) | (ide->service ? SERVICE_STAT : 0),cur_ide[ide_board],CS,pc,ide_board);
|
|
return temp;
|
|
// fatal("Bad IDE read %04X\n", addr);
|
|
}
|
|
|
|
uint16_t readidew(int ide_board)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
uint16_t temp;
|
|
#ifndef RPCEMU_IDE
|
|
/* if (ide_board && (cr0&1) && !(eflags&VM_FLAG))
|
|
{
|
|
// pclog("Failed read IDEw %04X:%08X\n",CS,pc);
|
|
return 0xFFFF;
|
|
}*/
|
|
#endif
|
|
// return 0xFFFF;
|
|
// pclog("Read IDEw %04X %04X:%04X %02X %i %i\n",ide->buffer[ide->pos >> 1],CS,pc,opcode,ins, ide->pos);
|
|
|
|
//if (idedebug) pclog("Read IDEW %08X\n",PC);
|
|
|
|
temp = ide->buffer[ide->pos >> 1];
|
|
#ifdef _RPCEMU_BIG_ENDIAN
|
|
temp=(temp>>8)|(temp<<8);
|
|
#endif
|
|
ide->pos+=2;
|
|
if ((ide->pos>=512 && ide->command != WIN_PACKETCMD) || (ide->command == WIN_PACKETCMD && ide->pos>=ide->packlen))
|
|
{
|
|
// pclog("Over! packlen %i %i\n",ide->packlen,ide->pos);
|
|
ide->pos=0;
|
|
if (ide->command == WIN_PACKETCMD)// && ide.packetstatus==6)
|
|
{
|
|
// pclog("Call readCD\n");
|
|
callreadcd(ide);
|
|
}
|
|
else
|
|
{
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide->packetstatus=0;
|
|
if (ide->command == WIN_READ || ide->command == WIN_READ_NORETRY || ide->command == WIN_READ_MULTIPLE)
|
|
{
|
|
ide->secount--;
|
|
if (ide->secount)
|
|
{
|
|
ide_next_sector(ide);
|
|
ide->atastat = BUSY_STAT;
|
|
timer_process();
|
|
if (ide->command == WIN_READ_MULTIPLE)
|
|
callbackide(ide_board);
|
|
else
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
timer_update_outstanding();
|
|
// pclog("set idecallback\n");
|
|
// callbackide(ide_board);
|
|
}
|
|
// else
|
|
// pclog("readidew done %02X\n", ide->atastat);
|
|
}
|
|
}
|
|
}
|
|
// pclog("Read IDEw %04X\n",temp);
|
|
return temp;
|
|
}
|
|
|
|
uint32_t readidel(int ide_board)
|
|
{
|
|
uint16_t temp;
|
|
// pclog("Read IDEl %i\n", ide_board);
|
|
temp = readidew(ide_board);
|
|
return temp | (readidew(ide_board) << 16);
|
|
}
|
|
|
|
int times30=0;
|
|
void callbackide(int ide_board)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
off64_t addr;
|
|
int c;
|
|
ext_ide = ide;
|
|
// return;
|
|
if (ide->command==0x30) times30++;
|
|
// if (times30==2240) output=1;
|
|
//if (times30==2471 && ide->command==0xA0) output=1;
|
|
///*if (ide_board) */pclog("CALLBACK %02X %i %i %i\n",ide->command,times30,ide->reset,cur_ide[ide_board]);
|
|
// if (times30==1294)
|
|
// output=1;
|
|
if (ide->reset)
|
|
{
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide->error=1;
|
|
ide->secount=1;
|
|
ide->sector=1;
|
|
ide->head=0;
|
|
ide->cylinder=0;
|
|
ide->reset = 0;
|
|
ide->blocksize = 0;
|
|
// pclog("Reset callback\n");
|
|
return;
|
|
}
|
|
switch (ide->command)
|
|
{
|
|
//Initialize the Task File Registers as follows: Status = 00h, Error = 01h, Sector Count = 01h, Sector Number = 01h, Cylinder Low = 14h, Cylinder High =EBh and Drive/Head = 00h.
|
|
case WIN_SRST: /*ATAPI Device Reset */
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide->error=1; /*Device passed*/
|
|
ide->secount = ide->sector = 1;
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
ide->cylinder = 0xeb14;
|
|
ide->atastat = 0;
|
|
} else {
|
|
ide->cylinder = 0;
|
|
}
|
|
ide_irq_raise(ide);
|
|
if (IDE_DRIVE_IS_CDROM(ide))
|
|
ide->service = 0;
|
|
return;
|
|
|
|
case WIN_RESTORE:
|
|
case WIN_SEEK:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
pclog("WIN_RESTORE callback on CD-ROM\n");
|
|
goto abort_cmd;
|
|
}
|
|
// pclog("WIN_RESTORE callback\n");
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide_irq_raise(ide);
|
|
return;
|
|
|
|
case WIN_READ:
|
|
case WIN_READ_NORETRY:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
// pclog("Read %i %i %i %08X\n",ide.cylinder,ide.head,ide.sector,addr);
|
|
/* if (ide.cylinder || ide.head)
|
|
{
|
|
fatal("Read from other cylinder/head");
|
|
}*/
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fread(ide->buffer, 512, 1, ide->hdfile);
|
|
ide->pos=0;
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
// pclog("Read sector callback %i %i %i offset %08X %i left %i %02X\n",ide.sector,ide.cylinder,ide.head,addr,ide.secount,ide.spt,ide.atastat[ide.board]);
|
|
// if (addr) output=3;
|
|
ide_irq_raise(ide);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_READ_DMA:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fread(ide->buffer, 512, 1, ide->hdfile);
|
|
ide->pos=0;
|
|
|
|
if (ide_bus_master_read_sector)
|
|
{
|
|
if (ide_bus_master_read_sector(ide_board, (uint8_t *)ide->buffer))
|
|
idecallback[ide_board]=6*IDE_TIME; /*DMA not performed, try again later*/
|
|
else
|
|
{
|
|
/*DMA successful*/
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
|
|
ide->secount--;
|
|
if (ide->secount)
|
|
{
|
|
ide_next_sector(ide);
|
|
ide->atastat = BUSY_STAT;
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
}
|
|
else
|
|
{
|
|
ide_irq_raise(ide);
|
|
ide_bus_master_set_irq(ide_board);
|
|
}
|
|
}
|
|
}
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_READ_MULTIPLE:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
// pclog("Read multiple from %08X %i (%i) %i\n", addr, ide->blockcount, ide->blocksize, ide->secount);
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fread(ide->buffer, 512, 1, ide->hdfile);
|
|
ide->pos=0;
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
if (!ide->blockcount)// || ide->secount == 1)
|
|
{
|
|
// pclog("Read multiple int\n");
|
|
ide_irq_raise(ide);
|
|
}
|
|
ide->blockcount++;
|
|
if (ide->blockcount >= ide->blocksize)
|
|
ide->blockcount = 0;
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_WRITE:
|
|
case WIN_WRITE_NORETRY:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
// pclog("Write sector callback %i %i %i offset %08X %i left %i\n",ide.sector,ide.cylinder,ide.head,addr,ide.secount,ide.spt);
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fwrite(ide->buffer, 512, 1, ide->hdfile);
|
|
ide_irq_raise(ide);
|
|
ide->secount--;
|
|
if (ide->secount)
|
|
{
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
ide->pos=0;
|
|
ide_next_sector(ide);
|
|
}
|
|
else
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_WRITE_DMA:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
|
|
if (ide_bus_master_write_sector)
|
|
{
|
|
if (ide_bus_master_write_sector(ide_board, (uint8_t *)ide->buffer))
|
|
idecallback[ide_board]=6*IDE_TIME; /*DMA not performed, try again later*/
|
|
else
|
|
{
|
|
/*DMA successful*/
|
|
addr = ide_get_sector(ide) * 512;
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fwrite(ide->buffer, 512, 1, ide->hdfile);
|
|
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
|
|
ide->secount--;
|
|
if (ide->secount)
|
|
{
|
|
ide_next_sector(ide);
|
|
ide->atastat = BUSY_STAT;
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
}
|
|
else
|
|
{
|
|
ide_irq_raise(ide);
|
|
ide_bus_master_set_irq(ide_board);
|
|
}
|
|
}
|
|
}
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_WRITE_MULTIPLE:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
// pclog("Write sector callback %i %i %i offset %08X %i left %i\n",ide.sector,ide.cylinder,ide.head,addr,ide.secount,ide.spt);
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
fwrite(ide->buffer, 512, 1, ide->hdfile);
|
|
ide->blockcount++;
|
|
if (ide->blockcount >= ide->blocksize || ide->secount == 1)
|
|
{
|
|
ide->blockcount = 0;
|
|
ide_irq_raise(ide);
|
|
}
|
|
ide->secount--;
|
|
if (ide->secount)
|
|
{
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
ide->pos=0;
|
|
ide_next_sector(ide);
|
|
}
|
|
else
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_VERIFY:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
ide->pos=0;
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
// pclog("Read verify callback %i %i %i offset %08X %i left\n",ide.sector,ide.cylinder,ide.head,addr,ide.secount);
|
|
ide_irq_raise(ide);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_FORMAT:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
goto abort_cmd;
|
|
}
|
|
addr = ide_get_sector(ide) * 512;
|
|
// pclog("Format cyl %i head %i offset %08X %08X %08X secount %i\n",ide.cylinder,ide.head,addr,addr>>32,addr,ide.secount);
|
|
fseeko64(ide->hdfile, addr, SEEK_SET);
|
|
memset(ide->buffer, 0, 512);
|
|
for (c=0;c<ide->secount;c++)
|
|
{
|
|
fwrite(ide->buffer, 512, 1, ide->hdfile);
|
|
}
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide_irq_raise(ide);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
return;
|
|
|
|
case WIN_DRIVE_DIAGNOSTICS:
|
|
ide->error=1; /*No error detected*/
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
ide_irq_raise(ide);
|
|
return;
|
|
|
|
case WIN_SPECIFY: /* Initialize Drive Parameters */
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
#ifndef RPCEMU_IDE
|
|
pclog("IS CDROM - ABORT\n");
|
|
#endif
|
|
goto abort_cmd;
|
|
}
|
|
ide->spt=ide->secount;
|
|
ide->hpc=ide->head+1;
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
#ifndef RPCEMU_IDE
|
|
// pclog("SPECIFY - %i sectors per track, %i heads per cylinder %i %i\n",ide->spt,ide->hpc,cur_ide[ide_board],ide_board);
|
|
#endif
|
|
ide_irq_raise(ide);
|
|
return;
|
|
|
|
case WIN_PIDENTIFY: /* Identify Packet Device */
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
// pclog("ATAPI identify\n");
|
|
ide_atapi_identify(ide);
|
|
ide->pos=0;
|
|
ide->error=0;
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
ide_irq_raise(ide);
|
|
return;
|
|
}
|
|
// pclog("Not ATAPI\n");
|
|
goto abort_cmd;
|
|
|
|
case WIN_SET_MULTIPLE_MODE:
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
#ifndef RPCEMU_IDE
|
|
pclog("IS CDROM - ABORT\n");
|
|
#endif
|
|
goto abort_cmd;
|
|
}
|
|
ide->blocksize = ide->secount;
|
|
ide->atastat = READY_STAT | DSC_STAT;
|
|
#ifndef RPCEMU_IDE
|
|
pclog("Set multiple mode - %i\n", ide->blocksize);
|
|
#endif
|
|
ide_irq_raise(ide);
|
|
return;
|
|
|
|
case WIN_SETIDLE1: /* Idle */
|
|
case 0xEF:
|
|
goto abort_cmd;
|
|
|
|
case WIN_IDENTIFY: /* Identify Device */
|
|
if (IDE_DRIVE_IS_CDROM(ide)) {
|
|
ide->secount=1;
|
|
ide->sector=1;
|
|
ide->cylinder=0xEB14;
|
|
ide->drive=ide->head=0;
|
|
goto abort_cmd;
|
|
}
|
|
if (ide->type != IDE_NONE)
|
|
{
|
|
ide_identify(ide);
|
|
ide->pos=0;
|
|
ide->atastat = DRQ_STAT | READY_STAT | DSC_STAT;
|
|
// pclog("ID callback\n");
|
|
ide_irq_raise(ide);
|
|
}
|
|
return;
|
|
|
|
case WIN_PACKETCMD: /* ATAPI Packet */
|
|
if (!IDE_DRIVE_IS_CDROM(ide)) goto abort_cmd;
|
|
// pclog("Packet callback! %i %08X\n",ide->packetstatus,ide);
|
|
if (!ide->packetstatus)
|
|
{
|
|
ide->pos=0;
|
|
ide->secount = (uint8_t)((ide->secount&0xF8)|1);
|
|
ide->atastat = DRQ_STAT |(ide->atastat&ERR_STAT);
|
|
//ide_irq_raise(ide);
|
|
// pclog("1 Preparing to recieve packet max DRQ count %04X\n",ide->cylinder);
|
|
}
|
|
else if (ide->packetstatus==1)
|
|
{
|
|
ide->atastat = BUSY_STAT|(ide->atastat&ERR_STAT);
|
|
// pclog("Running ATAPI command 2\n");
|
|
atapicommand(ide_board);
|
|
// exit(-1);
|
|
}
|
|
else if (ide->packetstatus==2)
|
|
{
|
|
// pclog("packetstatus==2\n");
|
|
ide->atastat = READY_STAT;
|
|
ide->secount=3;
|
|
ide_irq_raise(ide);
|
|
// if (iomd.irqb.mask&2) output=1;
|
|
}
|
|
else if (ide->packetstatus==3)
|
|
{
|
|
ide->atastat = DRQ_STAT|(ide->atastat&ERR_STAT);
|
|
// rpclog("Recieve data packet 3! %02X\n",ide->atastat);
|
|
ide_irq_raise(ide);
|
|
ide->packetstatus=0xFF;
|
|
}
|
|
else if (ide->packetstatus==4)
|
|
{
|
|
ide->atastat = DRQ_STAT|(ide->atastat&ERR_STAT);
|
|
// pclog("Send data packet 4!\n");
|
|
ide_irq_raise(ide);
|
|
// ide.packetstatus=5;
|
|
ide->pos=2;
|
|
}
|
|
else if (ide->packetstatus==5)
|
|
{
|
|
// pclog("Packetstatus 5 !\n");
|
|
atapicommand(ide_board);
|
|
}
|
|
else if (ide->packetstatus==6) /*READ CD callback*/
|
|
{
|
|
ide->atastat = DRQ_STAT|(ide->atastat&ERR_STAT);
|
|
// pclog("Recieve data packet 6!\n");
|
|
ide_irq_raise(ide);
|
|
// ide.packetstatus=0xFF;
|
|
}
|
|
else if (ide->packetstatus==0x80) /*Error callback*/
|
|
{
|
|
// pclog("Packet error\n");
|
|
ide->atastat = READY_STAT | ERR_STAT;
|
|
ide_irq_raise(ide);
|
|
}
|
|
return;
|
|
}
|
|
|
|
abort_cmd:
|
|
ide->atastat = READY_STAT | ERR_STAT | DSC_STAT;
|
|
ide->error = ABRT_ERR;
|
|
ide_irq_raise(ide);
|
|
}
|
|
|
|
void ide_callback_pri()
|
|
{
|
|
idecallback[0] = 0;
|
|
callbackide(0);
|
|
}
|
|
|
|
void ide_callback_sec()
|
|
{
|
|
idecallback[1] = 0;
|
|
callbackide(1);
|
|
}
|
|
|
|
/*ATAPI CD-ROM emulation
|
|
This mostly seems to work. It is implemented only on Windows at the moment as
|
|
I haven't had time to implement any interfaces for it in the generic gui.
|
|
It mostly depends on driver files - cdrom-iso.c for ISO image files (in theory
|
|
on any platform) and cdrom-ioctl.c for Win32 IOCTL access. There's an ATAPI
|
|
interface defined in ide.h.
|
|
There are a couple of bugs in the CD audio handling.
|
|
*/
|
|
|
|
struct
|
|
{
|
|
int sensekey,asc,ascq;
|
|
} atapi_sense;
|
|
|
|
static void atapi_notready(IDE *ide)
|
|
{
|
|
/*Medium not present is 02/3A/--*/
|
|
/*cylprecomp is error number*/
|
|
/*SENSE/ASC/ASCQ*/
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_NOT_READY << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
atapi_sense.sensekey=6;
|
|
atapi_sense.asc=0x28;
|
|
} else {
|
|
atapi_sense.sensekey=2;
|
|
atapi_sense.asc = ASC_MEDIUM_NOT_PRESENT;
|
|
}
|
|
ide->discchanged=0;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide->board]=50*IDE_TIME;
|
|
}
|
|
|
|
void atapi_discchanged()
|
|
{
|
|
ext_ide->discchanged=1;
|
|
atapi_sense.sensekey=6;
|
|
atapi_sense.asc=0x28;
|
|
}
|
|
|
|
uint8_t atapi_prev;
|
|
int toctimes=0;
|
|
static void atapicommand(int ide_board)
|
|
{
|
|
IDE *ide = &ide_drives[cur_ide[ide_board]];
|
|
uint8_t *idebufferb = (uint8_t *) ide->buffer;
|
|
int c;
|
|
int len;
|
|
int msf;
|
|
int pos=0;
|
|
unsigned char temp;
|
|
uint32_t size;
|
|
#ifndef RPCEMU_IDE
|
|
pclog("New ATAPI command %02X %i\n",idebufferb[0],ins);
|
|
#endif
|
|
// readflash=1;
|
|
msf=idebufferb[1]&2;
|
|
ide->cdlen=0;
|
|
if (idebufferb[0]!=GPCMD_REQUEST_SENSE)
|
|
{
|
|
atapi_prev=idebufferb[0];
|
|
atapi_sense.sensekey=0;
|
|
atapi_sense.asc=0;
|
|
}
|
|
switch (idebufferb[0])
|
|
{
|
|
case GPCMD_TEST_UNIT_READY:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
// if (atapi->ready())
|
|
// {
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
// }
|
|
// else
|
|
// {
|
|
// pclog("Medium not present!\n");
|
|
// }
|
|
break;
|
|
|
|
case GPCMD_REQUEST_SENSE: /* Used by ROS 4+ */
|
|
/*Will return 18 bytes of 0*/
|
|
memset(idebufferb,0,512);
|
|
// switch (atapi_prev)
|
|
// {
|
|
// case GPCMD_TEST_UNIT_READY:
|
|
idebufferb[0]=0x80|0x70;
|
|
idebufferb[2]=atapi_sense.sensekey;
|
|
idebufferb[12]=atapi_sense.asc;
|
|
idebufferb[13]=atapi_sense.ascq;
|
|
// break;
|
|
//
|
|
// default:
|
|
// fatal("Bad REQUEST_SENSE following command %02X\n",atapi_prev);
|
|
// }
|
|
ide->packetstatus=3;
|
|
ide->cylinder=18;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=18;
|
|
break;
|
|
|
|
case GPCMD_SET_SPEED:
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_READ_TOC_PMA_ATIP:
|
|
// pclog("Read TOC ready? %08X\n",ide);
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
toctimes++;
|
|
// if (toctimes==2) output=3;
|
|
// pclog("Read TOC %02X\n",idebufferb[9]);
|
|
switch (idebufferb[9]>>6)
|
|
{
|
|
case 0: /*Normal*/
|
|
len=idebufferb[8]+(idebufferb[7]<<8);
|
|
len=atapi->readtoc(idebufferb,idebufferb[6],msf,len,0);
|
|
break;
|
|
case 1: /*Multi session*/
|
|
len=idebufferb[8]+(idebufferb[7]<<8);
|
|
atapi->readtoc_session(idebufferb,msf,len);
|
|
idebufferb[0]=0; idebufferb[1]=0xA;
|
|
break;
|
|
default:
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
/* pclog("Bad read TOC format\n");
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X ",idebufferb[c]);
|
|
pclog("\n");
|
|
exit(-1);*/
|
|
}
|
|
// pclog("ATAPI buffer len %i\n",len);
|
|
ide->packetstatus=3;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=len;
|
|
return;
|
|
|
|
case GPCMD_READ_CD:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
// pclog("Read CD : start LBA %02X%02X%02X%02X Length %02X%02X%02X Flags %02X\n",idebufferb[2],idebufferb[3],idebufferb[4],idebufferb[5],idebufferb[6],idebufferb[7],idebufferb[8],idebufferb[9]);
|
|
if (idebufferb[9]!=0x10)
|
|
{
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
// pclog("Bad flags bits %02X\n",idebufferb[9]);
|
|
// exit(-1);
|
|
}
|
|
/* if (idebufferb[6] || idebufferb[7] || (idebufferb[8]!=1))
|
|
{
|
|
pclog("More than 1 sector!\n");
|
|
exit(-1);
|
|
}*/
|
|
ide->cdlen=(idebufferb[6]<<16)|(idebufferb[7]<<8)|idebufferb[8];
|
|
ide->cdpos=(idebufferb[2]<<24)|(idebufferb[3]<<16)|(idebufferb[4]<<8)|idebufferb[5];
|
|
// pclog("Read at %08X %08X\n",ide.cdpos,ide.cdpos*2048);
|
|
atapi->readsector(idebufferb,ide->cdpos);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
ide->cdpos++;
|
|
ide->cdlen--;
|
|
if (ide->cdlen>=0) ide->packetstatus=6;
|
|
else ide->packetstatus=3;
|
|
ide->cylinder=2048;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=2048;
|
|
return;
|
|
|
|
case GPCMD_READ_10:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
// pclog("Read 10 : start LBA %02X%02X%02X%02X Length %02X%02X%02X Flags %02X\n",idebufferb[2],idebufferb[3],idebufferb[4],idebufferb[5],idebufferb[6],idebufferb[7],idebufferb[8],idebufferb[9]);
|
|
|
|
ide->cdlen=(idebufferb[7]<<8)|idebufferb[8];
|
|
ide->cdpos=(idebufferb[2]<<24)|(idebufferb[3]<<16)|(idebufferb[4]<<8)|idebufferb[5];
|
|
if (!ide->cdlen)
|
|
{
|
|
// pclog("All done - callback set\n");
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=20*IDE_TIME;
|
|
break;
|
|
}
|
|
|
|
atapi->readsector(idebufferb,ide->cdpos);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
ide->cdpos++;
|
|
ide->cdlen--;
|
|
if (ide->cdlen>=0) ide->packetstatus=6;
|
|
else ide->packetstatus=3;
|
|
ide->cylinder=2048;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=2048;
|
|
return;
|
|
|
|
case GPCMD_READ_HEADER:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
if (msf)
|
|
{
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
// pclog("Read Header MSF!\n");
|
|
// exit(-1);
|
|
}
|
|
for (c=0;c<4;c++) idebufferb[c+4]=idebufferb[c+2];
|
|
idebufferb[0]=1; /*2048 bytes user data*/
|
|
idebufferb[1]=idebufferb[2]=idebufferb[3]=0;
|
|
|
|
ide->packetstatus=3;
|
|
ide->cylinder=8;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=8;
|
|
return;
|
|
|
|
case GPCMD_MODE_SENSE_10:
|
|
// output=3;
|
|
// pclog("Mode sense - ready?\n");
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
len=(idebufferb[8]|(idebufferb[7]<<8));
|
|
|
|
//pclog("Mode sense %02X %i\n",idebufferb[2],len);
|
|
temp=idebufferb[2];
|
|
// switch (idebufferb[2])
|
|
// {
|
|
// case GPMODE_ALL_PAGES:
|
|
// case GPMODE_CAPABILITIES_PAGE:
|
|
for (c=0;c<len;c++) idebufferb[c]=0;
|
|
len = ide_atapi_mode_sense(ide,8,temp);
|
|
// break;
|
|
// default:
|
|
// for (c=0;c<len;c++) idebufferb[c]=0;
|
|
/* pclog("Bad mode sense\n");
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X\n",idebufferb[c]);
|
|
exit(-1);*/
|
|
// }
|
|
|
|
/*Set mode parameter header - bytes 0 & 1 are data length (filled out later),
|
|
byte 2 is media type*/
|
|
idebufferb[0]=len>>8;
|
|
idebufferb[1]=len&255;
|
|
idebufferb[2]=3; /*120mm data CD-ROM*/
|
|
// pclog("ATAPI buffer len %i\n",len);
|
|
/* for (c=0;c<len;c++) pclog("%02X ",idebufferb[c]);
|
|
pclog("\n");*/
|
|
ide->packetstatus=3;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
// ide.atastat = DRQ_STAT;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=1000*IDE_TIME;
|
|
ide->packlen=len;
|
|
// pclog("Sending packet\n");
|
|
return;
|
|
|
|
case GPCMD_MODE_SELECT_10:
|
|
// if (!atapi->ready()) { atapi_notready(); return; }
|
|
if (ide->packetstatus==5)
|
|
{
|
|
ide->atastat = 0;
|
|
// pclog("Recieve data packet!\n");
|
|
ide_irq_raise(ide);
|
|
ide->packetstatus=0xFF;
|
|
ide->pos=0;
|
|
// pclog("Length - %02X%02X\n",idebufferb[0],idebufferb[1]);
|
|
// pclog("Page %02X length %02X\n",idebufferb[8],idebufferb[9]);
|
|
}
|
|
else
|
|
{
|
|
len=(idebufferb[7]<<8)|idebufferb[8];
|
|
ide->packetstatus=4;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=6*IDE_TIME;
|
|
ide->packlen=len;
|
|
/* pclog("Waiting for ARM to send packet %i\n",len);
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X ",idebufferb[c]);
|
|
pclog("\n");*/
|
|
}
|
|
return;
|
|
|
|
case GPCMD_PLAY_AUDIO_12:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
/*This is apparently deprecated in the ATAPI spec, and apparently
|
|
has been since 1995 (!). Hence I'm having to guess most of it*/
|
|
pos=(idebufferb[3]<<16)|(idebufferb[4]<<8)|idebufferb[5];
|
|
len=(idebufferb[7]<<16)|(idebufferb[8]<<8)|idebufferb[9];
|
|
atapi->playaudio(pos,len,0);
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_PLAY_AUDIO_MSF:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
pos=(idebufferb[3]<<16)|(idebufferb[4]<<8)|idebufferb[5];
|
|
len=(idebufferb[6]<<16)|(idebufferb[7]<<8)|idebufferb[8];
|
|
atapi->playaudio(pos,len,1);
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_READ_SUBCHANNEL:
|
|
if (!atapi->ready()) { /*pclog("Read subchannel not ready\n"); */atapi_notready(ide); return; }
|
|
temp=idebufferb[2]&0x40;
|
|
if (idebufferb[3]!=1)
|
|
{
|
|
// pclog("Read subchannel check condition %02X\n",idebufferb[3]);
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
/* pclog("Bad read subchannel!\n");
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X\n",idebufferb[c]);
|
|
dumpregs();
|
|
exit(-1);*/
|
|
}
|
|
pos=0;
|
|
idebufferb[pos++]=0;
|
|
idebufferb[pos++]=0; /*Audio status*/
|
|
idebufferb[pos++]=0; idebufferb[pos++]=0; /*Subchannel length*/
|
|
idebufferb[pos++]=1; /*Format code*/
|
|
idebufferb[1]=atapi->getcurrentsubchannel(&idebufferb[5],msf);
|
|
// pclog("Read subchannel complete - audio status %02X\n",idebufferb[1]);
|
|
len=11+5;
|
|
if (!temp) len=4;
|
|
ide->packetstatus=3;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=1000*IDE_TIME;
|
|
ide->packlen=len;
|
|
break;
|
|
|
|
case GPCMD_START_STOP_UNIT:
|
|
if (idebufferb[4]!=2 && idebufferb[4]!=3 && idebufferb[4])
|
|
{
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
/* pclog("Bad start/stop unit command\n");
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X\n",idebufferb[c]);
|
|
exit(-1);*/
|
|
}
|
|
if (!idebufferb[4]) atapi->stop();
|
|
else if (idebufferb[4]==2) atapi->eject();
|
|
else atapi->load();
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_INQUIRY:
|
|
idebufferb[0] = 5; /*CD-ROM*/
|
|
idebufferb[1] = 0x80; /*Removable*/
|
|
idebufferb[2] = 0;
|
|
idebufferb[3] = 0x21;
|
|
idebufferb[4] = 31;
|
|
idebufferb[5] = 0;
|
|
idebufferb[6] = 0;
|
|
idebufferb[7] = 0;
|
|
#ifdef RPCEMU_IDE
|
|
ide_padstr8(idebufferb + 8, 8, "RPCemu"); /* Vendor */
|
|
ide_padstr8(idebufferb + 16, 16, "RPCemuCD"); /* Product */
|
|
#else
|
|
ide_padstr8(idebufferb + 8, 8, "PCem"); /* Vendor */
|
|
ide_padstr8(idebufferb + 16, 16, "PCemCD"); /* Product */
|
|
#endif
|
|
ide_padstr8(idebufferb + 32, 4, "v1.0"); /* Revision */
|
|
|
|
len=36;
|
|
ide->packetstatus=3;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=len;
|
|
break;
|
|
|
|
case GPCMD_PREVENT_REMOVAL:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_PAUSE_RESUME:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
if (idebufferb[8]&1) atapi->resume();
|
|
else atapi->pause();
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_SEEK:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
pos=(idebufferb[3]<<16)|(idebufferb[4]<<8)|idebufferb[5];
|
|
atapi->seek(pos);
|
|
ide->packetstatus=2;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
case GPCMD_READ_CDROM_CAPACITY:
|
|
if (!atapi->ready()) { atapi_notready(ide); return; }
|
|
size = atapi->size();
|
|
idebufferb[0] = (size >> 24) & 0xff;
|
|
idebufferb[1] = (size >> 16) & 0xff;
|
|
idebufferb[2] = (size >> 8) & 0xff;
|
|
idebufferb[3] = size & 0xff;
|
|
idebufferb[4] = (2048 >> 24) & 0xff;
|
|
idebufferb[5] = (2048 >> 16) & 0xff;
|
|
idebufferb[6] = (2048 >> 8) & 0xff;
|
|
idebufferb[7] = 2048 & 0xff;
|
|
len=8;
|
|
ide->packetstatus=3;
|
|
ide->cylinder=len;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide_board]=60*IDE_TIME;
|
|
ide->packlen=len;
|
|
break;
|
|
|
|
case GPCMD_SEND_DVD_STRUCTURE:
|
|
default:
|
|
ide->atastat = READY_STAT | ERR_STAT; /*CHECK CONDITION*/
|
|
ide->error = (SENSE_ILLEGAL_REQUEST << 4) | ABRT_ERR;
|
|
if (ide->discchanged) {
|
|
ide->error |= MCR_ERR;
|
|
}
|
|
ide->discchanged=0;
|
|
atapi_sense.asc = ASC_ILLEGAL_OPCODE;
|
|
ide->packetstatus=0x80;
|
|
idecallback[ide_board]=50*IDE_TIME;
|
|
break;
|
|
|
|
/* default:
|
|
pclog("Bad ATAPI command %02X\n",idebufferb[0]);
|
|
pclog("Packet data :\n");
|
|
for (c=0;c<12;c++)
|
|
pclog("%02X\n",idebufferb[c]);
|
|
exit(-1);*/
|
|
}
|
|
}
|
|
|
|
static void callreadcd(IDE *ide)
|
|
{
|
|
ide_irq_lower(ide);
|
|
if (ide->cdlen<=0)
|
|
{
|
|
// pclog("All done - callback set\n");
|
|
ide->packetstatus=2;
|
|
idecallback[ide->board]=20*IDE_TIME;
|
|
return;
|
|
}
|
|
// pclog("Continue readcd! %i blocks left\n",ide->cdlen);
|
|
ide->atastat = BUSY_STAT;
|
|
|
|
atapi->readsector((uint8_t *) ide->buffer, ide->cdpos);
|
|
#ifndef RPCEMU_IDE
|
|
readflash=1;
|
|
#endif
|
|
ide->cdpos++;
|
|
ide->cdlen--;
|
|
ide->packetstatus=6;
|
|
ide->cylinder=2048;
|
|
ide->secount=2;
|
|
ide->pos=0;
|
|
idecallback[ide->board]=60*IDE_TIME;
|
|
ide->packlen=2048;
|
|
}
|
|
|
|
|
|
|
|
void ide_write_pri(uint16_t addr, uint8_t val, void *priv)
|
|
{
|
|
writeide(0, addr, val);
|
|
}
|
|
void ide_write_pri_w(uint16_t addr, uint16_t val, void *priv)
|
|
{
|
|
writeidew(0, val);
|
|
}
|
|
void ide_write_pri_l(uint16_t addr, uint32_t val, void *priv)
|
|
{
|
|
writeidel(0, val);
|
|
}
|
|
uint8_t ide_read_pri(uint16_t addr, void *priv)
|
|
{
|
|
return readide(0, addr);
|
|
}
|
|
uint16_t ide_read_pri_w(uint16_t addr, void *priv)
|
|
{
|
|
return readidew(0);
|
|
}
|
|
uint32_t ide_read_pri_l(uint16_t addr, void *priv)
|
|
{
|
|
return readidel(0);
|
|
}
|
|
|
|
void ide_write_sec(uint16_t addr, uint8_t val, void *priv)
|
|
{
|
|
writeide(1, addr, val);
|
|
}
|
|
void ide_write_sec_w(uint16_t addr, uint16_t val, void *priv)
|
|
{
|
|
writeidew(1, val);
|
|
}
|
|
void ide_write_sec_l(uint16_t addr, uint32_t val, void *priv)
|
|
{
|
|
writeidel(1, val);
|
|
}
|
|
uint8_t ide_read_sec(uint16_t addr, void *priv)
|
|
{
|
|
return readide(1, addr);
|
|
}
|
|
uint16_t ide_read_sec_w(uint16_t addr, void *priv)
|
|
{
|
|
return readidew(1);
|
|
}
|
|
uint32_t ide_read_sec_l(uint16_t addr, void *priv)
|
|
{
|
|
return readidel(1);
|
|
}
|
|
|
|
void ide_pri_enable()
|
|
{
|
|
io_sethandler(0x01f0, 0x0008, ide_read_pri, ide_read_pri_w, ide_read_pri_l, ide_write_pri, ide_write_pri_w, ide_write_pri_l, NULL);
|
|
io_sethandler(0x03f6, 0x0001, ide_read_pri, NULL, NULL, ide_write_pri, NULL, NULL , NULL);
|
|
}
|
|
|
|
void ide_pri_disable()
|
|
{
|
|
io_removehandler(0x01f0, 0x0008, ide_read_pri, ide_read_pri_w, ide_read_pri_l, ide_write_pri, ide_write_pri_w, ide_write_pri_l, NULL);
|
|
io_removehandler(0x03f6, 0x0001, ide_read_pri, NULL, NULL, ide_write_pri, NULL, NULL , NULL);
|
|
}
|
|
|
|
void ide_sec_enable()
|
|
{
|
|
io_sethandler(0x0170, 0x0008, ide_read_sec, ide_read_sec_w, ide_read_sec_l, ide_write_sec, ide_write_sec_w, ide_write_sec_l, NULL);
|
|
io_sethandler(0x0376, 0x0001, ide_read_sec, NULL, NULL, ide_write_sec, NULL, NULL , NULL);
|
|
}
|
|
|
|
void ide_sec_disable()
|
|
{
|
|
io_removehandler(0x0170, 0x0008, ide_read_sec, ide_read_sec_w, ide_read_sec_l, ide_write_sec, ide_write_sec_w, ide_write_sec_l, NULL);
|
|
io_removehandler(0x0376, 0x0001, ide_read_sec, NULL, NULL, ide_write_sec, NULL, NULL , NULL);
|
|
}
|
|
|
|
void ide_init()
|
|
{
|
|
ide_pri_enable();
|
|
ide_sec_enable();
|
|
ide_bus_master_read_sector = ide_bus_master_write_sector = NULL;
|
|
|
|
timer_add(ide_callback_pri, &idecallback[0], &idecallback[0], NULL);
|
|
timer_add(ide_callback_sec, &idecallback[1], &idecallback[1], NULL);
|
|
}
|
|
|
|
void ide_set_bus_master(int (*read_sector)(int channel, uint8_t *data), int (*write_sector)(int channel, uint8_t *data), void (*set_irq)(int channel))
|
|
{
|
|
ide_bus_master_read_sector = read_sector;
|
|
ide_bus_master_write_sector = write_sector;
|
|
ide_bus_master_set_irq = set_irq;
|
|
}
|