Added patched version for Commodore Plus/4

build.sh

@@ -39,7 +39,7 @@ $c1541 \
 cd ..
 $python src/crc32.py reference-binaries/ntsc work
 
-# And now, we build the PAL version
+# Next, we build the PAL version
 cd work
 
 # Extract the files from the original disk image
@@ -69,3 +69,19 @@ $c1541 \
 # Report checksums
 cd ..
 $python src/crc32.py reference-binaries/pal work
+
+# And finally we modify the Plus/4 version
+cd work
+
+# Copy the decrypted PRG to the work folder
+cp ../original-disks/elite_+4_unpacked.prg .
+
+# Assemble the additional code required for flicker-free ships
+$beebasm -i ../src/elite-flicker-free-plus4.asm -v > compile.txt
+
+# Modify the main game code
+$python ../src/elite-modify-plus4.py
+
+# Report checksums
+cd ..
+$python src/crc32.py reference-binaries/plus4 work

reference-binaries/plus4/ll78-plus4.bin

@@ -0,0 +1 @@
+¥ûÅ0°¥[i…[<5B>æ\柤ŸÄ®°L¶¨ê

reference-binaries/plus4/shppt-plus4.bin

@@ -0,0 +1 @@
+ †6Ð¥CÉŽ° \¢¥Ci
 \¢©(…(Lxª©÷%(…(Lxª…l…n¥5…ki<03>©ÿ…mL@r

src/elite-flicker-free-plus4.asm

@@ -0,0 +1,428 @@
+\ ******************************************************************************
+\
+\ BBC MASTER ELITE GAME SOURCE (FLICKER-FREE ROUTINES)
+\
+\ BBC Master Elite was written by Ian Bell and David Braben and is copyright
+\ Acornsoft 1986
+\
+\ The code on this site has been reconstructed from a disassembly of the version
+\ released on Ian Bell's personal website at http://www.elitehomepage.org/
+\
+\ The commentary is copyright Mark Moxon, and any misunderstandings or mistakes
+\ in the documentation are entirely my fault
+\
+\ The terminology and notations used in this commentary are explained at
+\ https://www.bbcelite.com/about_site/terminology_used_in_this_commentary.html
+\
+\ The deep dive articles referred to in this commentary can be found at
+\ https://www.bbcelite.com/deep_dives
+\
+\ ******************************************************************************
+
+GUARD &CE00             \ Guard against assembling over memory used by game
+
+\ ******************************************************************************
+\
+\ Configuration variables
+\
+\ The addresses in the following are from when the game binary is loaded into
+\ memory. They were calculated by analysing a memory dump of the running game,
+\ searching for patterns in the bytes to match them with the corrsponding code
+\ from the BBC Micro version (which is very similar, if you ignore any different
+\ addresses).
+\
+\ XX14 is an unused variable in BBC Micro Elite, and the corresponding address
+\ in Commodore 64 Elite is used by something else. Luckily locations $FB to $FE
+\ are unused by Elite and the OS, so we can sneak XX14 in there instead.
+\
+\ Also, the Y variable contains the height of the space view in pixels, divided
+\ by 2. This is 96 on the BBC Micro, but the space view is 144 pixels on the
+\ Commodore 64, so Y needs to be set to 72 instead.
+\
+\ ******************************************************************************
+
+XX1     = $0009
+INWK    = $0009
+XX19    = $002A
+CNT     = $0030
+K3      = $0035
+K4      = $0043
+XX0     = $0057
+V       = $005B
+XX15    = $006B
+X1      = $006B
+Y1      = $006C
+X2      = $006D
+Y2      = $006E
+XX12    = $0071
+XX17    = $009F
+XX4     = $00AD
+XX20    = $00AE
+XX14    = $00FB
+PROJ    = $860F         \ Note, this is not equal to $7D1F + $0900
+LL75    = $9FB8 + $0900
+LL30    = $B49D         \ Note, this is not equal to $AB91 + $0900
+Y       = 72
+
+\ ******************************************************************************
+\
+\       Name: SHPPT
+\       Type: Subroutine
+\   Category: Drawing ships
+\    Summary: Draw a distant ship as a point rather than a full wireframe
+\
+\ ******************************************************************************
+
+ORG $9932 + $0900
+
+.SHPPT
+
+ JSR PROJ               \ Project the ship onto the screen, returning:
+                        \
+                        \   * K3(1 0) = the screen x-coordinate
+                        \   * K4(1 0) = the screen y-coordinate
+                        \   * A = K4+1
+
+ ORA K3+1               \ If either of the high bytes of the screen coordinates
+ BNE nono               \ are non-zero, jump to nono as the ship is off-screen
+
+ LDA K4                 \ Set A = the y-coordinate of the dot
+
+ CMP #Y*2-2             \ If the y-coordinate is bigger than the y-coordinate of
+ BCS nono               \ the bottom of the screen, jump to nono as the ship's
+                        \ dot is off the bottom of the space view
+
+ JSR Shpt               \ Call Shpt to draw a horizontal 4-pixel dash for the
+                        \ first row of the dot (i.e. a four-pixel dash)
+
+ LDA K4                 \ Set A = y-coordinate of dot + 1 (so this is the second
+ CLC                    \ row of the two-pixel-high dot)
+ ADC #1
+
+ JSR Shpt               \ Call Shpt to draw a horizontal 4-pixel dash for the
+                        \ first row of the dot (i.e. a four-pixel dash)
+
+ LDA #%00001000         \ Set bit 3 of the ship's byte #31 to record that we
+ ORA XX1+31             \ have now drawn something on-screen for this ship
+ STA XX1+31
+
+ JMP LL155              \ Jump to LL155 to draw any remaining lines that are
+                        \ still in the ship line heap and return from the
+                        \ subroutine using a tail call
+
+.nono
+
+ LDA #%11110111         \ Clear bit 3 of the ship's byte #31 to record that
+ AND XX1+31             \ nothing is being drawn on-screen for this ship
+ STA XX1+31
+
+ JMP LL155              \ Jump to LL155 to draw any remaining lines that are
+                        \ still in the ship line heap and return from the
+                        \ subroutine using a tail call
+
+.Shpt
+
+                        \ This routine draws a horizontal 4-pixel dash, for
+                        \ either the top or the bottom of the ship's dot
+
+ STA Y1                 \ Store A in both y-coordinates, as this is a horizontal
+ STA Y2                 \ dash at y-coordinate A
+
+ LDA K3                 \ Set A = screen x-coordinate of the ship dot
+
+ STA X1                 \ Store the x-coordinate of the ship dot in X1, as this
+                        \ is where the dash starts
+
+ CLC                    \ Set A = screen x-coordinate of the ship dot + 3
+ ADC #3
+
+ BCC P%+4               \ If the addition overflowed, set A = 255, the
+ LDA #255               \ x-coordinate of the right edge of the screen
+
+ STA X2                 \ Store the x-coordinate of the ship dot in X1, as this
+                        \ is where the dash starts
+
+ JMP LLX30              \ Draw this edge using flicker-free animation, by first
+                        \ drawing the ship's new line and then erasing the
+                        \ corresponding old line from the screen, and return
+                        \ from the subroutine using a tail call
+
+SAVE "shppt-plus4.bin", SHPPT, P%
+
+\ ******************************************************************************
+\
+\       Name: LL9 (Part 11 of 12)
+\       Type: Subroutine
+\   Category: Drawing ships
+\    Summary: Draw ship: Loop back for the next edge
+\  Deep dive: Drawing ships
+\
+\ ******************************************************************************
+
+ORG $A15B + $0900
+
+.LL78
+
+ LDA XX14               \ If XX14 >= CNT, skip to LL81 so we don't loop back for
+ CMP CNT                \ the next edge (CNT was set to the maximum heap size
+ BCS LL81               \ for this ship in part 10, so this checks whether we
+                        \ have just run out of space in the ship line heap, and
+                        \ stops drawing edges if we have)
+
+ LDA V                  \ Increment V by 4 so V(1 0) points to the data for the
+ CLC                    \ next edge
+ ADC #4
+ STA V
+
+ BCC ll81               \ If the above addition didn't overflow, jump to ll81
+
+ INC V+1                \ Otherwise increment the high byte of V(1 0), as we
+                        \ just moved the V(1 0) pointer past a page boundary
+
+.ll81
+
+ INC XX17               \ Increment the edge counter to point to the next edge
+
+ LDY XX17               \ If Y >= XX20, which contains the number of edges in
+ CPY XX20               \ the blueprint, skip the following
+ BCS P%+5
+
+ JMP LL75-2             \ Loop back to LL75-2 to process the next edge (we jump
+                        \ to LL75-2 as we have modified the code around LL75,
+                        \ which moves the jump point back by two bytes)
+
+.LL81
+
+ NOP
+
+SAVE "ll78-plus4.bin", LL78, P%
+
+\ ******************************************************************************
+\
+\       Name: LL9 (Part 12 of 12)
+\       Type: Subroutine
+\   Category: Drawing ships
+\    Summary: Draw ship: Draw all the visible edges from the ship line heap
+\  Deep dive: Drawing ships
+\
+\ ******************************************************************************
+
+ORG $A178 + $0900
+
+.LL155
+
+ LDY XX14               \ Set Y to the offset in the line heap XX14
+
+.LL27
+
+ CPY XX14+1             \ If Y >= XX14+1, jump to LLEX to return from the ship
+ BCS LLEX               \ drawing routine, because the index in Y is greater
+                        \ than the size of the existing ship line heap, which
+                        \ means we have alrady erased all the old ships lines
+                        \ when drawing the new ship
+
+                        \ If we get here then Y < XX14+1, which means Y is
+                        \ pointing to an on-screen line from the old ship that
+                        \ we need to erase
+
+ LDA (XX19),Y           \ Fetch the X1 line coordinate from the heap and store
+ STA XX15               \ it in XX15
+
+ INY                    \ Increment the heap pointer
+
+ LDA (XX19),Y           \ Fetch the Y1 line coordinate from the heap and store
+ STA XX15+1             \ it in XX15+1
+
+ INY                    \ Increment the heap pointer
+
+ LDA (XX19),Y           \ Fetch the X2 line coordinate from the heap and store
+ STA XX15+2             \ it in XX15+2
+
+ INY                    \ Increment the heap pointer
+
+ LDA (XX19),Y           \ Fetch the Y2 line coordinate from the heap and store
+ STA XX15+3             \ it in XX15+3
+
+ JSR LL30               \ Draw a line from (X1, Y1) to (X2, Y2) to erase it from
+                        \ the screen
+
+ INY                    \ Increment the heap pointer
+
+ JMP LL27               \ Loop back to LL27 to draw (i.e. erase) the next line
+                        \ from the heap
+
+.LLEX
+
+ LDA XX14               \ Store XX14 in the first byte of the ship line heap
+ LDY #0
+ STA (XX19),Y
+
+.LL82
+
+ RTS                    \ Return from the subroutine
+
+SAVE "ll155-plus4.bin", LL155, P%
+
+ORG $7240
+
+\ ******************************************************************************
+\
+\       Name: LLX30
+\       Type: Subroutine
+\   Category: Drawing lines
+\    Summary: Draw a ship line using flicker-free animation
+\
+\ ******************************************************************************
+
+.LLX30
+
+ LDY XX14               \ Set Y = XX14, to get the offset within the ship line
+                        \ heap where we want to insert our new line
+
+ CPY XX14+1             \ Compare XX14 and XX14+1 and store the flags on the
+ PHP                    \ stack so we can retrieve them later
+
+ LDX #3                 \ We now want to copy the line coordinates (X1, Y1) and
+                        \ (X2, Y2) to XX12...XX12+3, so set a counter to copy
+                        \ 4 bytes
+
+.LLXL
+
+ LDA X1,X               \ Copy the X-th byte of X1/Y1/X2/Y2 to the X-th byte of
+ STA XX12,X             \ XX12
+
+ DEX                    \ Decrement the loop counter
+
+ BPL LLXL               \ Loop back until we have copied all four bytes
+
+ JSR LL30               \ Draw a line from (X1, Y1) to (X2, Y2)
+
+ LDA (XX19),Y           \ Set X1 to the Y-th coordinate on the ship line heap,
+ STA X1                 \ i.e. one we are replacing in the heap
+
+ LDA XX12               \ Replace it with the X1 coordinate in XX12
+ STA (XX19),Y
+
+ INY                    \ Increment the index to point to the Y1 coordinate
+
+ LDA (XX19),Y           \ Set Y1 to the Y-th coordinate on the ship line heap,
+ STA Y1                 \ i.e. one we are replacing in the heap
+
+ LDA XX12+1             \ Replace it with the Y1 coordinate in XX12+1
+ STA (XX19),Y
+
+ INY                    \ Increment the index to point to the X2 coordinate
+
+ LDA (XX19),Y           \ Set X1 to the Y-th coordinate on the ship line heap,
+ STA X2
+
+ LDA XX12+2             \ Replace it with the X2 coordinate in XX12+2
+ STA (XX19),Y
+
+ INY                    \ Increment the index to point to the Y2 coordinate
+
+ LDA (XX19),Y           \ Set Y2 to the Y-th coordinate on the ship line heap,
+ STA Y2
+
+ LDA XX12+3             \ Replace it with the Y2 coordinate in XX12+3
+ STA (XX19),Y
+
+ INY                    \ Increment the index to point to the next coordinate
+ STY XX14               \ and store the updated index in XX14
+
+ PLP                    \ Restore the result of the comparison above, so if the
+ BCS LL82a              \ original value of XX14 >= XX14+1, then we have already
+                        \ redrawn all the lines from the old ship's line heap,
+                        \ so return from the subroutine (as LL82 contains an
+                        \ RTS)
+
+ JMP LL30               \ Otherwise there are still more lines to erase from the
+                        \ old ship on-screen, so the coordinates in (X1, Y1) and
+                        \ (X2, Y2) that we just pulled from the ship line heap
+                        \ point to a line that is still on-screen, so call LL30
+                        \ to draw this line and erase it from the screen,
+                        \ returning from the subroutine using a tail call
+
+.LL82a
+
+ RTS                    \ Return from the subroutine
+
+\ ******************************************************************************
+\
+\       Name: LL9 (Part 1 of 12)
+\       Type: Subroutine
+\   Category: Drawing ships
+\    Summary: Draw ship: Check if ship is exploding, check if ship is in front
+\  Deep dive: Drawing ships
+\
+\ ******************************************************************************
+
+.PATCH1
+
+                        \ We replace the following two instructions in part 1 of
+                        \ LL9 with JSR PATCH1, so we start with those two
+                        \ instructions to ensure that they still get done
+
+ LDA #31                \ Set XX4 = 31 to store the ship's distance for later
+ STA XX4                \ comparison with the visibility distance. We will
+                        \ update this value below with the actual ship's
+                        \ distance if it turns out to be visible on-screen
+
+                        \ We now set things up for flicker-free ship plotting,
+                        \ by setting the following:
+                        \
+                        \   XX14 = offset to the first coordinate in the ship's
+                        \          line heap
+                        \
+                        \   XX14+1 = the number of bytes in the heap for the
+                        \            ship that's currently on-screen (or 0 if
+                        \            there is no ship currently on-screen)
+
+ LDY #1                 \ Set XX14 = 1, the offset of the first set of line
+ STY XX14               \ coordinates in the ship line heap
+
+ DEY                    \ Decrement Y to 0
+
+ LDA #%00001000         \ If bit 3 of the ship's byte #31 is set, then the ship
+ BIT INWK+31            \ is currently being drawn on-screen, so skip the
+ BNE P%+5               \ following two instructions
+
+ LDA #0                 \ The ship is not being drawn on screen, so set A = 0
+                        \ so that XX14+1 gets set to 0 below (as there are no
+                        \ existing coordinates on the ship line heap for this
+                        \ ship)
+
+ EQUB $2C               \ Skip the next instruction by turning it into
+                        \ $2C $B1 $BD, or BIT $BDB1 which does nothing apart
+                        \ from affect the flags
+
+ LDA (XX19),Y           \ Set XX14+1 to the first byte of the ship's line heap,
+ STA XX14+1             \ which contains the number of bytes in the heap
+
+ RTS
+
+\ ******************************************************************************
+\
+\       Name: LL9 (Part 10 of 12)
+\       Type: Subroutine
+\   Category: Drawing ships
+\    Summary: Draw ship: Check if ship is exploding, check if ship is in front
+\  Deep dive: Drawing ships
+\
+\ ******************************************************************************
+
+.PATCH2
+
+                        \ We replace the JMP LL78 instruction at the end of part
+                        \ 10 of LL9 with JSR PATCH2, so this effectively inserts
+                        \ the call to LLX30 at the end of part 10, as required
+
+ JSR LLX30              \ Draw the laser line using flicker-free animation, by
+                        \ first drawing the new laser line and then erasing the
+                        \ corresponding old line from the screen
+
+ JMP LL78               \ Jump down to part 11
+
+
+SAVE "extra-plus4.bin", LLX30, P%
+

src/elite-flicker-free.asm

@@ -61,7 +61,6 @@ XX20    = $00AE
 XX14    = $00FB
 PROJ    = $7D1F
 LL75    = $9FB8
-LL80    = $A13F
 LL30    = $AB91
 Y       = 72
 

src/elite-modify-plus4.py

@@ -0,0 +1,321 @@
+#!/usr/bin/env python
+#
+# ******************************************************************************
+#
+# COMMODORE PLUS/4 ELITE FLICKER-FREE MODIFICATION SCRIPT
+#
+# Written by Mark Moxon
+#
+# This script applies flicker-free ship-drawing to Commodore Plus/4} Elite, as
+# described here:
+#
+# https://www.bbcelite.com/deep_dives/flicker-free_ship_drawing.html
+#
+# It does the following:
+#
+#   * Modify the PRG file to draw flicker-free ships
+#
+# Run this script by changing directory to the folder containing the disk files
+# and running the script with "python elite-modify.py"
+#
+# This modification script works with the following disk image, which is the
+# Pigmy Plus/4 version from Ian Bell's site, with the demo and packing removed:
+#
+#   * elite_+4_unpacked.prg
+#
+# ******************************************************************************
+
+from __future__ import print_function
+import os
+
+
+# Convert a C64 address into the corresponding offset within the gma6 file
+
+def get_offset(addr):
+    return addr - load_address
+
+
+# Insert a binary file into the game code, overwriting what's there
+
+def insert_binary_file(data_block, addr, filename):
+    file = open(filename, "rb")
+    file_size = os.path.getsize(filename)
+    insert_from = get_offset(addr)
+    insert_to = insert_from + file_size
+    data_block[insert_from:insert_to] = file.read()
+    file.close()
+    print("[ Modify  ] insert file {} at 0x{:02X}".format(filename, addr))
+
+
+# Insert an array of bytes into the game code, overwriting what's there
+
+def insert_bytes(data_block, addr, insert):
+    insert_from = get_offset(addr)
+    insert_to = insert_from + len(insert)
+    data_block[insert_from:insert_to] = insert
+    print("[ Modify  ] insert {} bytes at 0x{:02X}".format(len(insert), addr))
+
+
+# Insert a block of NOPs into the game code, overwriting what's there
+
+def insert_nops(data_block, addr, count):
+    insert = [0xEA] * count
+    insert_bytes(data_block, addr, insert)
+    print("[ Modify  ] insert {} NOPs at 0x{:02X}".format(count, addr))
+
+
+# Print a progess message
+
+print()
+print("Modifying Commodore Plus/4 Elite")
+
+# Configuration variables
+
+load_address = 0x1100 - 2
+
+# Set up an array to hold the game binary, so we can modify it
+
+data_block = bytearray()
+
+# Load the main code file into data_block
+
+elite_file = open("elite_+4_unpacked.prg", "rb")
+data_block.extend(elite_file.read())
+elite_file.close()
+
+print()
+print("[ Read    ] elite_+4_unpacked.prg")
+
+# Set the addresses for the extra routines (LLX30, PATCH1, PATCH2) that we will
+# load into unused portiong of the main game code
+
+llx30 = 0x7240
+patch1 = 0x727E
+patch2 = 0x7295
+
+# We now modify the code to implement flicker-free ship drawing. The code
+# changes are described here, which can be read alongside the following:
+#
+# https://www.bbcelite.com/deep_dives/backporting_the_flicker-free_algorithm.html
+#
+# The addresses in the following are from when the game binary is loaded into
+# memory. They were calculated by analysing a memory dump of the running game,
+# searching for patterns in the bytes to match them with the corrsponding code
+# from the BBC Micro version (which is very similar, if you ignore any different
+# addresses).
+
+# SHPPT
+#
+# We start with the new version of SHPPT, which we have already assembled in
+# BeebAsm and saved as the binary file shppt.bin, so we simply drop this over
+# the top of the existing routine (which is slightly longer, so there is room).
+
+insert_binary_file(data_block, 0x9932 + 0x900, "shppt-plus4.bin")
+
+# LL9 (Part 1)
+#
+# This is the modification just after LL9. We insert the extra code with a call
+# to the new PATCH1 routine, which implements the original instructions before
+# moving on to the new code.
+#
+# From: LDA #31
+#       STA XX4
+#
+# To:   JSR PATCH1
+#       NOP
+
+insert_bytes(data_block, 0x9A8A + 0x900, [
+    0x20, patch1 % 256, patch1 // 256   # JSR PATCH1
+])
+insert_nops(data_block, 0x9A8D + 0x900, 1)
+
+# LL9 (Part 9)
+#
+# This is the modification at EE31.
+#
+# From: LDA #%00001000
+#       BIT XX1+31
+#       BEQ LL74
+#       JSR LL155
+#
+# To:   LDY #9
+#       LDA (XX0),Y
+#       STA XX20
+#       NOP
+#       NOP
+#       NOP
+
+insert_bytes(data_block, 0x9F2A + 0x900, [
+    0xA0, 0x09,                         # LDY #9
+    0xB1, 0x57,                         # LDA (XX0),Y
+    0x85, 0xAE                          # STA XX20
+])
+insert_nops(data_block, 0x9F30 + 0x900, 3)
+
+# LL9 (Part 9)
+#
+# This is the modification just after LL74.
+#
+# From: LDY #9
+#       LDA (XX0),Y
+#       STA XX20
+#       LDY #0
+#       STY U
+#       STY XX17
+#       INC U
+#
+# To:   LDY #0
+#       STY XX17
+#       NOP x10
+
+insert_bytes(data_block, 0x9F39 + 0x900, [
+    0xA0, 0x00,                         # LDY #0
+    0x84, 0x9F                          # STY XX17
+])
+insert_nops(data_block, 0x9F3D + 0x900, 10)
+
+# LL9 (Part 9)
+#
+# This is the modification at the end of the routine.
+#
+# From: LDA XX15
+#       STA (XX19),Y
+#       INY
+#       LDA XX15+1
+#       STA (XX19),Y
+#       INY :
+#       LDA XX15+2
+#       STA (XX19),Y
+#       INY
+#       LDA XX15+3
+#       STA (XX19),Y
+#       INY
+#       STY U
+#
+# To:   JSR LLX30
+#       NOP x21
+
+insert_bytes(data_block, 0x9F87 + 0x900, [
+    0x20, llx30 % 256, llx30 // 256     # JSR LLX30
+])
+insert_nops(data_block, 0x9F8A + 0x900, 21)
+
+# LL9 (Part 10)
+#
+# This is the modification around LL75.
+#
+# From: STA T1
+#       LDY XX17
+#
+# To:   STA CNT
+#       LDY #0
+
+insert_bytes(data_block, 0x9FB4 + 0x900, [
+    0x85, 0x30,                         # STA CNT
+    0xA0, 0x00                          # LDY #0
+])
+
+# LL9 (Part 10)
+#
+# This is the second INY after LL75.
+#
+# From: INY
+#
+# To:   NOP
+
+insert_nops(data_block, 0x9FC1 + 0x900, 1)
+
+# LL9 (Part 10)
+#
+# This are the two modifications at LL79.
+#
+# From: LDA (V),Y
+#       TAX
+#       INY
+#       LDA (V),Y
+#       STA Q
+#       ... four lots of unchanged LDA/STA, 5 bytes each ...
+#       LDX Q
+#
+# To:   INY
+#       LDA (V),Y
+#       TAX
+#       ... shuffle the LDA/STA block down by 4 bytes ...
+#       INY
+#       LDA (V),Y
+#       TAX
+#       NOP
+#       NOP
+
+insert_bytes(data_block, 0x9FD9 + 0x900, [
+    0xC8,                                   # INY
+    0xB1, 0x5B,                             # LDA (V),Y
+    0xAA                                    # TAX
+])
+
+lda_sta_block = get_offset(0x9FDD + 0x900)
+for n in range(lda_sta_block, lda_sta_block + 4 * 5):
+    data_block[n] = data_block[n + 4]
+
+insert_bytes(data_block, 0x9FF1 + 0x900, [
+    0xC8,                                   # INY
+    0xB1, 0x5B,                             # LDA (V),Y
+    0xAA                                    # TAX
+])
+insert_nops(data_block, 0x9FF5 + 0x900, 2)
+
+# LL9 (Part 10)
+#
+# This is the modification at the end of the routine. The C64 version has an
+# extra JMP LL80 instruction at this point that we can modify to jump to a
+# new routine PATCH2, which lets us insert the extra JSR LLX30 without taking
+# up any more bytes.
+#
+# From: JMP LL80
+#
+# To:   JMP PATCH2
+
+insert_bytes(data_block, 0xA010 + 0x900, [
+    0x4C, patch2 % 256, patch2 // 256       # JMP PATCH2
+])
+
+# LL9 (Part 11)
+#
+# This is the modification at LL80.
+#
+# We blank out the .LL80 section with 28 NOPs
+
+insert_nops(data_block, 0xA13F + 0x900, 28)
+
+# LL9 (Part 11)
+#
+# We have already assembled the modified part 11 in BeebAsm and saved it as
+# the binary file ll78.bin, so now we drop this over the top of the existing
+# routine (which is exactly the same size).
+
+insert_binary_file(data_block, 0xA15B + 0x900, "ll78-plus4.bin")
+
+# LL9 (Part 12)
+#
+# We have already assembled the modified part 11 in BeebAsm and saved it as
+# the binary file ll115.bin, so now we drop this over the top of the existing
+# routine (which is slightly longer, so there is room).
+
+insert_binary_file(data_block, 0xA178 + 0x900, "ll155-plus4.bin")
+
+# We now load the three extra routines required by the modifications into the
+# memory used by the Trumble sprites, which are not used in the Plus/4 version:
+#
+#   LLX30
+#   PATCH1
+#   PATCH2
+
+insert_binary_file(data_block, 0x7240, "extra-plus4.bin")
+
+# All the modifications are done, so write the output file for the modified PRG
+
+output_file = open("elite_+4_modified.prg", "wb")
+output_file.write(data_block)
+output_file.close()
+
+print("[ Save    ] elite_+4_modified.prg")